The Taiwan Bookstore

Contact Info.

Products List

VF05-118	Radar and RF Front End System Designs for Wireless Systems (9798369309162)
	Shilpa Mehta/ IGI97909162/ Price:US$ 255.00

	Within the pages of this publication, a narrative unfolds that transcends theoretical discourse. The book offers a unique opportunity for academic scholars, researchers, and industry professionals to not only understand the intricacies of RF Frontend systems but also to grapple with the practical challenges posed by their rapid evolution. It becomes a guide in navigating this dynamic landscape, providing a deep exploration of the issues at hand and paving the way for informed solutions and breakthroughs. Amidst the intricacies of RF Frontend systems, the publication strategically unfolds its content across four key sections. These sections encompass RF Frontend Antenna Systems for wireless applications, Radar and Antenna Systems design and modeling, the Impact of AI/ML in Frontend System Design and Applications, and Test and Measurement for Frontend system designs. Each section serves as a gateway for scholars and professionals to delve deeper into these critical areas, providing not only theoretical insights but also practical applications that bridge the gap between academic understanding and real-world challenges. Coverage: The many academic areas covered in this publication include, but are not limited to: ‧Beamforming Architectures ‧Calibration and Measurement ‧Challenges for Reconfigurable RF Frontend System Design ‧Deep Neural Network Applications for Radar and Antenna Analysis ‧Dynamic Metasurface Antenna system ‧Feeding and Control Systems for Reconfigurable Antenna Systems ‧Intelligent Internet of Things Network Analysis and Optimization ‧Low-Noise Amplifiers ‧Power Combiners ‧Radar and Antenna Systems ‧Radar Modeling and Signal Processing ‧Reconfigurable Antenna System for 5G and 6G ‧Reflective Intelligent Surface ‧RF Front-End Antenna Systems ‧Wireless System Modeling and Signal Processing

SF05-517	Power Quality in Power Distribution Systems: Concepts and Applications
	Mahesh Kumar Mishra/ 9780367750916/ Price:GBP 110.00



SF05-517	Design of Electromechanical and Combination Products: An Agile and Systems Approach
	Ali Jamnia/ 9781032294070/ Price:GBP 110.00



SF05-517	Instrumentation and Control
	Yasser Elsayed/ 9781774697825/ Price:US$ 110.00



SF05-517	Illustrated Dictionary of Electrical & Electronics Engineering
	Antonio Escobar-Molero/ 9781984688224/ Price:US$ 65.00

	Provides clear definitions and visual illustrations of key terms and concepts in the field of electrical and electronics engineering. This dictionary covers a wide range of topics, including circuit theory, digital electronics, power systems, telecommunications, and more. Third edition of this dictionary incorporates many new definitions and a thorough revision of previous entries and an ideal resource for learners at all levels.

SF05-517	Electrical Engineering Drawing (with Access code)
	Christian Nollen/ 9781984688439/ Price:US$ 95.00



SF05-517	Electric Circuits (with Access code)
	Christian Tryon/ 9781984688446/ Price:US$ 95.00



SF05-517	Electrical Machines (with Access code)
	Christine Foyer/ 9781984688453/ Price:US$ 95.00



SF05-517	Core Concepts in Engineering: Electrical Engineering (with Access code)
	Elena Labarta/ 9781984688712/ Price:US$ 85.00

	Covers the fundamental principles and applications of electrical engineering, offering invaluable insights and knowledge to both aspiring and seasoned engineers. With its clear explanations and practical examples, this book serves as an indispensable resource for mastering the core concepts in the field. In its updated edition, this book has been extensively revised on a chapter by chapter basis. Some new chapters are also added.

SF05-517	Core Concepts in Engineering: Electronics Engineering (with Access code)
	Emily Weinert/ 9781984688729/ Price:US$ 85.00

	Delves into the fundamental principles and theories behind the field, providing readers with a solid foundation to understand and apply electronics engineering concepts. With clear explanations and practical examples, this book is an essential resource for aspiring engineers. In its updated edition, this book has been extensively revised on a chapter by chapter basis. Some new chapters are also added.

SF05-517	Basic Knowledge of Electrical Technology
	3G Editorial Board/ 9781984685551/ Price:US$ 70.00

	A comprehensive guide to the fundamentals of electrical engineering. It deals with topics such as circuit analysis, electrical machines, power systems, and more. The book is an essential resource for anyone interested in pursuing a career in electrical engineering or related fields.

SF05-517	Basics of Circuits
	3G Editorial Board/ 9781984685681/ Price:US$ 70.00



SF05-517	Intelligent Control for Modern Transportation Systems
	Arunesh Kumar Singh/ 9781032393001/ Price:GBP 89.99



SF05-517	Low Power Designs in Nanodevices and Circuits for Emerging Applications
	Shilpi Birla/ 9781032412771/ Price:GBP 140.00



SF05-516	Smart Embedded Systems: Advances and Applications
	Arun Kumar Sinha/ 9781032404172/ Price:GBP 120.00



SF05-516	Introduction to Image Acquisition and Display Technologies: Photon Manipulation in Image Sensors and Displays
	Ichiro Fujieda/ 9781032429311/ Price:GBP 82.99



SF05-514	Field Theory of Nonimaging Optics
	Angel Garcia-Botella/ 9780367543440/ Price:GBP 120.00



SF05-514	Energy-Efficient Electrical Systems for Buildings
	Moncef Krarti/ 9781032233833/ Price:GBP 110.00



VF05-117	Studies on Single and Double Actuator Based DC Attraction Type Levitation Systems: Optimization Techniques
	Rupam Bhaduri/ 9781668473894/ Price:US$ 170.00

	Studies on Single and Double Actuator Based DC Attraction Type Levitation Systems: Optimization Techniques, authored by Dr. Rupam Bhaduri provides a comprehensive solution to the challenges faced by DCALS. This book offers an in-depth analysis, design, and optimization of DCALS, focusing on single and double actuator systems. It equips academic scholars with the knowledge and tools to overcome system complexities through advanced optimization techniques. Dr. Bhaduri explores interdisciplinary approaches, integrating concepts from electromagnetism, electronics, power electronics, mechanical engineering, and control systems to achieve stability and precise control in levitation systems. The book is an invaluable resource for academic scholars, researchers, and engineering professionals specializing in electromagnetism, electronics, power electronics, mechanical engineering, and control systems. This book caters to individuals seeking a deeper understanding of DC attraction-type levitation systems and provides interdisciplinary approaches to address their challenges. By leveraging the insights and advanced optimization techniques presented in this book, scholars can contribute to the advancement of DCALS through innovative research and development, unlocking its full potential and enabling precise control and stability in industrial applications. Coverage: The many academic areas covered in this publication include, but are not limited to: ‧Analysis ‧Control ‧Design ‧Electromagnetism ‧Engineering ‧Interdisciplinary ‧Levitation ‧Nonlinearity ‧Optimization ‧Power Electronics ‧Precise Control ‧Stability ‧System Complexities ‧Unmodeled Dynamics

SF05-518	Close-Range Photogrammetry and 3D Imaging
	Thomas Luhmann/ 9783111029351/ Price:EUR 159.95



SF05-518	Multistatic Passive Radar Target Detection: A Detection Theory Framework.
	Amir Zaimbashi/ 9781839538520/ Price:GBP 125.00



SF05-518	Next-Generation Cognitive Radar Systems.
	Kumar Vijay Mishra/ 9781839534744/ Price:GBP 145.00



SF05-518	Interactions of Wind Turbines with Aviation Radio and Radar Systems.
	Alan Collinson/ 9781839538452/ Price:GBP 130.00



SF05-516	Machine Learning and the Internet of Things in Solar Power Generation
	Prabha Umapathy/ 9781032299785/ Price:GBP 89.99



SF05-514	Grid-Forming Power Inverters: Control and Applications
	Nabil Mohammed/ 9781032298887/ Price:GBP 74.99



SF05-514	Topological Charge of Optical Vortices
	Victor V. Kotlyar/ 9781032345536/ Price:GBP 140.00



SF05-514	Power-Flow Modeling of HVDC Transmission Systems
	Shagufta Khan/ 9781032171661/ Price:GBP 140.00



SF05-512	Flexible Flat Panel Displays
	Darran R. Cairns/ 9781118751114/ Price:US$ 140.00



SF05-511	Concepts of Semi-Conductors
	3G Editorial Board/ 9781984678874/ Price:US$ 95.00

	Offers an accessible guide to semiconductors using qualitative explanations and analogies, with minimal mathematics and equations. This book provides an overview of compound semiconductor materials and their technology.

SF05-511	Electrical Machine Rewinding
	3G Editorial Board/ 9781984679000/ Price:US$ 95.00

	This book presents the current coil winding methods, their associated technologies and the associated automation techniques. The book is suitable for fitters, engineers, apprentices, technicians, and students of mechanical or electrical engineering.

SF05-511	Measuring Instruments, Electrostatic and DC Machines
	3G Editorial Board/ 9781984679017/ Price:US$ 95.00

	The book covers Measuring Instruments, Principle of Permanent Magnet Moving Coil (PMMC), Moving Iron Instruments, Ammeters & Voltmeters, and Operating Principles of the Electrodynamometer Instruments. This book combines the traditional areas of electric machinery with the latest in modern control and power electronics.

SF05-511	Illustrated Handbook of Superatoms
	3G Editorial Board/ 9781984681201/ Price:US$ 180.00

	Presents a molecular understanding of catalysis and catalytically active materials is of fundamental importance in designing new substances for applications in energy and fuels. The book covers topics as varied as the thermal and thermoelectric properties of cluster-based materials and clusters for CO2 activation and conversion.

SF05-510	Mechatronics Technology
	3G Editorial Board/ 9781984679970/ Price:US$ 95.00

	This book is intended to cover in mechatronic and integrated monitoring and management systems with applications to architectural, archaeology survey, construction management and civil engineering. Designed for the student who wishes to prepare for a career as a Mechatronics technician/electrician. In its updated second edition, this book has been extensively revised on a chapter by chapter basis.

SF05-510	Residential Wiring
	3G Editorial Board/ 9781984680044/ Price:US$ 95.00

	This revised edition examines residence unit electrical power and lighting wiring for the installer. Covers all aspects of residential wiring and how to apply them to the wiring of a typical house. This edition is thoroughly updated with new chapters and the latest coverage of the topics.

SF05-510	3G Handy Guide: Electrician
	3G Editorial Board/ 9781984680761/ Price:US$ 90.00

	This is a basic training and maintenance guide designed to explain the principles involved in the operation of electrical equipment in an average industrial plant. This handy guide covers everything from choosing the correct devices, tools, and materials to the efficient management of tools and materials in an actual construction operation. In its updated second edition, this guide has been extensively revised on a chapter by chapter basis.

SF05-510	Applications of Nanowires in Electronics
	Ravi Prakash/ 9781774690772/ Price:US$ 180.00

	One-dimensional semiconducting materials are expected to produce highly-efficient electronic components due to their extraordinary characteristics in applications like nanoscale electronics, biology, optoelectronics, and energy storage. Moreover, complex semiconducting materials have also been developed from nanowires using epitaxial growth mechanisms. The current application areas of nanowires include high-speed transistors, nanoelectronics, chemical- and biosensors, and LEDs (light-emitting diodes) with little power consumption. Concerns for the synthesis of these devices include inferior mobility and optical characteristics of nanomaterials materials. This book offers a thorough understanding of recent developments in synthesizing nanowires for constructing various types of electronic components. Especially, the book reviews the uses of nanowires in sensors, detectors, energy storage, circuits, and energy conversion, etc. Growth approaches of various types of nanowires are also discoursed along with the discussion of their electronic applications. Therefore, this book can be used as a ready reference by researchers, students, and teachers in the field of nanotechnology and electronics.

SF05-510	Organic Semiconductors for Optoelectronics
	S.N. Shukla/ 9781774695302/ Price:US$ 180.00

	"The book " "Organic Semiconductors for Optoelectronics"" provides a thorough analysis of the topic and illustrated examples of organic semiconductors in various applications. Organic semiconductors, which are composed of polymers or -bonded molecules, may conduct when charge carriers are inserted into them. The backbone of the polymeric chain containing the conjugated system of bonds enables charge transfer through the polymer chain. This textbook offers the teachers, researchers, and students an easy and thorough explanation of the principles, guidelines, and, particularly, the complicated instrumentation techniques used in optoelectronics. It discusses some recent advances in the study of the optoelectronic properties of organic semiconductors while also summarizing the fundamental ideas. Examples and applications of electronic and optoelectronic organic materials are also discussed in the book. This handbook thoroughly covers different aspects of organic semiconductors present today. Even a reader with no prior knowledge should be able to grasp the fundamental concepts of organic semiconductors after reading this book.

SF05-510	Electric Power Conversion and Micro-Grids
	Marco Buccolini/ 9781682519257/ Price:US$ 165.00

	Nowadays, distributed generation and microgrids (MGs) is becoming an important research line because of their peculiar characteristics. MGs are composed of small power sources which can be renewable and placed near customer sites. Moreover, they have the inherent property of islanding: the disconnection of either the MG from the main grid or a part of an MG from the rest of the MG. The book offers a comprehensive overview of recent achievements in the field of microgrids and electric power conversion.

SF05-510	Basic Properties of Semiconductors
	Denis Gallot/ 9781682519264/ Price:US$ 165.00

	Semiconductors are an essential component of electronic devices, enabling advances in communications, computing, healthcare, military systems, transportation, clean energy, and countless other applications. Due to their role in the fabrication of electronic devices, semiconductors are an important part of our lives. Imagine life without electronic devices. There would be no smartphones, radios, TVs, computers, video games, or advanced medical diagnostic equipment. The text covers a wide range of important semiconductor phenomena, from the simple to the advanced. This book presents a detailed description of the basic physics of semiconductors.

SF05-510	Basic Digital Signal Processing
	Barbara Sawicka/ 9781682519271/ Price:US$ 165.00

	The primary key to success for any business in today’s well-connected world is quick, easy, reliable, and secure communication and information exchange. The biggest contributor to this progress is the digital storage of data and the easy and reliable transmission of data from place to place. Digital Signal Processing is the key and its knowledge is becoming very important in comprehending the quality and reliability that it delivers. Written with student-centered, the text provides a self-contained introduction to the theory of digital signal processing.

SF05-510	Emerging Trends in Mechatronics
	Patrizia Rogolino/ 9781682519295/ Price:US$ 165.00

	Several new technologies have emerged, allowing designers to revolutionize their approach. Some ideas were impossible to implement a decade ago, but with the advent of these new technologies these ideas have been revised, and mechatronic design methods are being considered. As mechatronic systems get more complex, the challenges associated with successfully executing them also become more demanding. The purpose of this book is to help better understand how mechatronics will impact the practice and research of developing advanced techniques to model, control and optimize complex systems.

SF05-510	Laser-Based Additive Manufacturing
	Dominika Skiba/ 9781682519301/ Price:US$ 165.00

	Additive manufacturing (AM) is a transformative technology that has rapidly grown over the past decade. Laser additive manufacturing (LAM) realizes a multitude of customized medical applications, such as prosthetics or implants. Today, a wide range of biocompatible materials is available for LAM, and yet further processes for metals, plastics or ceramics are under development. This book introduces laser-based additive manufacturing methods and reviews the types of lasers widely used in 3D printing machines.

SF05-510	Recent Advances in Nanogenerators
	Hiroyoshi Tanaka/ 9781682519325/ Price:US$ 165.00

	Nano energy is a field of studying small-scale, highly efficient energy harvesting, storage, and applications by using nanomaterials and nanodevices. Converting nano-energies in our surroundings is essential to meet the challenges that we are facing in the Internet-of-things era. As a result, various types of nanogenerators have been developed to scavenge energies that are produced in the surrounding environment. This book introduces innovative and high-efficiency technology for mechanical energy harvesting. The book provides an introduction to nanogenerators, which are the newest technological advancement in the field of energy conversion.

SF05-510	Electrical Technology
	3G Editorial Board/ 9781984679956/ Price:US$ 95.00

	This book is designed to provide the student with an opportunity to acquire the skills, knowledge, and understanding needed to the occupation as an entry level electrician. The book provides a blend of theory and hands-on experience for the electrical construction and industrial maintenance fields. In its updated second edition, this book has been extensively revised on a chapter by chapter basis.

SF05-510	Electronics Technology
	3G Editorial Board/ 9781984679963/ Price:US$ 95.00

	Integrates comprehensive electronic circuit theory with practical work; develop solid troubleshooting skills using modern industry-quality instruments; prepares students to work in the field of electronics. This book helps you understand technical vocabulary and technologies while providing the skills necessary to read schematic diagrams, apply problem-solving formulas, and provide useful information on subjects from basic components and building block circuits. In its updated second edition, this book has been extensively revised on a chapter by chapter basis.

SF05-510	Basic Electrical and Electronics Engineering
	3G Editorial Board/ 9781984680150/ Price:US$ 95.00

	This book provides an overview of the basics of electrical and electronic engineering. With its simple language and clear-cut style of explanation, this revised edition presents a detailed exposition of the basic facets of electrical and electronics engineering. It is also intended to cover the vast and fast-growing field of electrical and electronic materials and their engineering in accordance with modern developments. This edition is thoroughly updated with new chapters and the latest coverage of the topics.

	Electromagnetic Non-Destructive Evaluation (XXIV)
	Bilicz, S./ 9781643683805/ Price:EUR 116.00

	This book presents the proceedings of ENDE2022, the 25th International Workshop on Electromagnetic Nondestructive Evaluation, which, due to ongoing pandemic travel restrictions, took place as a virtual event organized in Budapest, Hungary, from 13 to 15 June 2022. ENDE2022 was the first online event so far held as part of the workshop series, and its mission was to ensure the continuity of the ENDE series during a difficult time, and to provide the scientific community with an opportunity to share recent results related to electromagnetic nondestructive evaluation. A total of 26 contributions from 10 different countries were accepted for presentation at the workshop. Short versions of all presented papers were published electronically in the digest of the workshop, and the 11 full papers accepted after thorough peer-review are published here. Providing an overview of the latest developments in the field, the book will be of interest to all those whose work involves the use of electromagnetic nondestructive evaluation.

	ZnO and Their Hybrid Nano-Structures: Potential Candidates for Diverse Applications
	Gaurav Sharma/ 9781644902387/ Price:US$ 95.00

	ZnO and its hybrid nanostructures have unique optical, physical and chemical properties. The book covers recent trends in processing techniques and applications. Topics include solar cells, photo-voltaic devices, fuel cells, uv filters, lasers, light-emitting diodes, photo-detectors, spin-tronic devices, magnetic semiconductors, nano-generators, piezotronics, photo-catalytic applications against harmful organic pollutants like dyes, heavy metals, antibiotics, and sensors such as bio sensors, chemical sensors, gas sensors.

	Handbook of Research on Emerging Designs and Applications for Microwave and Millimeter Wave Circuits
	Jamal Zbitou/ 9781668459553/ Price:US$ 325.00

	Microwave and millimeter-wave (mm-wave) circuits and systems have been widely employed in various emerging technologies such as 5G and beyond wireless mobile communication systems, autonomous driving, electronic warfare, and radar systems. To better understand the benefits, challenges, and opportunities of this technology, further study is required. The Handbook of Research on Emerging Designs and Applications for Microwave and Millimeter Wave Circuits describes the latest advances in microwave and mm-wave applications and provides state-of-the-art research in the domain of microwave, mm-wave, and THz devices and systems. Covering key topics such as antennas, circuits, propagation, and energy harvesting, this major reference work is ideal for computer scientists, industry professionals, researchers, academicians, practitioners, scholars, instructors, and students. Coverage: The many academic areas covered in this publication include, but are not limited to: ‧Antennas ‧Antennas Systems ‧Circuits ‧Emerging Technology ‧Energy Harvesting ‧Metallic Materials ‧Microwave Amplifier ‧Passive Components ‧Propagation ‧Reliability

	Characterization of Ceramic-Ferrite Magneto-Electric Composites
	R. Saravanan/ 9781644902189/ Price:US$ 95.00

	Magneto-electric ceramic composites are important materials for designing new microwave sensors (e.g. field probes) and devices such as filters, attenuators, capacitive resonators, gyrators and devices for medical applications. The book presents new research results for the following composite systems: (1-x) BaTiO3 + x NiFe2O4 II (1-x); BaTiO3 + x ZnFe2O4; (1-x) BaTiO3 + x CoFe2O4 and (1-x) BaTiO3 + x MgFe2O4.

SF05-518	Principles of Modern Radar: Basic Principles
	Mark A. Richards/ 9781839533815/ Price:GBP 120.00



SF05-512	Proceedings of CECNet 2022: The 12th International Conference on Electronics, Communications and Networks (CECNet 2022), 4-7 November 2022
	Antonio J. Tallon-Ballesteros/ 9781643683683/ Price:EUR 177.00

	Electronics, communication and networks coexist, and it is not possible to conceive of our current society without them. Within the next decade we will probably see the consolidation of 6G-based technology, accompanied by many compatible devices, and fiber-optic is already an advanced technology with many applications. This book presents the proceedings of CECNet 2022, the 12th International Conference on Electronics, Communications and Networks, held as a virtual event with no face-to-face participation in Xiamen, China, from 4 to 7 November 2022. CECNet is held annually, and covers many interrelated groups of topics such as electronics technology, communication engineering and technology, wireless communications engineering and technology and computer engineering and technology. This year the conference committee received 313 submissions. All papers were carefully reviewed by program committee members, taking into consideration the breadth and depth of research topics falling within the scope of the conference, and after further discussion, 79 papers were selected for presentation at the conference and for publication in this book. This represents an acceptance rate of about 25%.

SF05-509	Nuclear Electronics with Quantum Cryogenic Detectors
	Vladimir Polushkin/ 9781119834687/ Price:US$ 175.00



SF05-509	Surface Structure Determination by LEED and X-rays
	Wolfgang Moritz/ 9781108418096/ Price:GBP 110.00



SF05-504	Fundamentals of Electrical Circuits
	3G Editorial Board/ 9781984659286/ Price:US$ 95.00

	Retaining the same organization as its predecessor, this second edition adds considerable material on new topics. Covers fundamental concepts in electrical circuits; circuit analysis and network theorems; linearity and superposition; series/parallel circuits etc. Deals with the principal areas of electrical engineering theory, ranging from simple resistive circuits to Fourier and transient analysis.

SF05-504	3GE Collection on Engineering: 3D Printing Technology
	3G Editorial Board/ 9781984660008/ Price:US$ 160.00

	Students will understand the various software tools, process and techniques for digital manufacturing. This book will assist you understand how 3D printing is being applied across a number of domains, including design, manufacturing, and retailing. It will also demonstrate the special capabilities of 3D printing such as customization, self-assembly, and the ability to print complex objects.

SF05-504	Conduct Detailed Inspection of Electrical Installations
	3G Editorial Board/ 9781984658630/ Price:US$ 85.00

	Contains aspects that explain and demonstrate the calculation for the power demand of a system and the calculation of earth fault currents. Aims to provide you with both the theoretical and applied education and training so that you can either obtain a new role or excel further in your current role within the building and construction industry.

SF05-504	Manage Large Electrical Projects
	3G Editorial Board/ 9781984658678/ Price:US$ 85.00

	Covers the management of large electrical projects involving design, modifications, installation, and/or maintenance of systems and equipment. Encompasses management of safety, budget variation, personnel, resources, critical path timelines and completion documentation. Covers Project lifecycle; Project planning; Project monitoring and evaluation; Completion of a team project in electrical engineering involving teamwork, problem solving and use of project management and engineering skills.

SF05-503	Fundamentals of Photonics
	3G Editorial Board/ 9781984659682/ Price:US$ 95.00

	Provides an introduction to photonics, optoelectronics, lasers and fiber-optics. Covers the following topics such as the development of lasers and optical systems; application of lasers for measurement tasks and materials processing; optical communication; optical measurement techniques and microscopy methods; semiconductor technology and micro-systems and photovoltaic.

SF05-503	Carbon Electronics
	Nelson Bolivar/ 9781774690499/ Price:US$ 170.00

	This book, Carbon Electronics, offers a comprehensive overview of the latest advances in the area of carbon based electronic and circuit applications. The book essentially encompasses physical, chemical and electrical characteristics of carbon based materials. It familiarizes the readers with basic device physics and electronic configurations of carbon materials while offering different examples of the state-of-the-art carbon nanotube devices. The applications of carbon materials include cell electrodes, flexible displays, transistors, organic electronics, solar cells, integrated circuits and semiconductors. These applications offer solutions for the current energy and health crisis. Each contribution of the carbon-based materials emphasizes on the significance of the structural and functional characteristics of electronic devices.

SF05-503	Instrumentation and Control
	3G Editorial Board/ 9781984659316/ Price:US$ 95.00

	Retaining the same organization as its predecessor, this second edition adds considerable material on new topics. Covers the measurement terminology, differentiating between analog and digital, describe the instrumentation used for electronic testing and develop the principles of operation of transducers used for industrial process measurement and control. The overall approach of this book makes it an ideal work for all students in control engineering and instrumentation.

SF05-503	Electromagnectic Fields (Book with DVD)
	3G Editorial Board/ 9781984659330/ Price:US$ 95.00

	Retaining the same organization as its predecessor, this second edition adds considerable material on new topics. Configure an emphasis on basic principles and a focus on electromagnetic formulation and analysis. Offers a detailed discussion on the range of EMF sources and exposures.

SF05-503	Graphene Devices
	Nelson Bolivar/ 9781774690505/ Price:US$ 170.00

	Graphene is considered to be the pioneer two-dimensional material with an immense potential of research and industrial growth. It constitutes the foundation for novel electronic applications of nanomaterials. Successful segregation of single-layered graphene has instigated a lot of curiosity in unraveling the prospects of its use in synthesis of various electronic and electrical devices, predominantly because of its remarkable electronic characteristics. This book primarily focuses on practical uses of graphene determined by its unique characteristics. The mechanisms of thermal and electric transport in graphene, quantum dots, interface phenomena, non-equilibrium states, dissipation, and scattering are thoroughly discussed in the book. Detailed evaluations and comparisons between theoretical and experimental aspects of graphene based materials are illustrated with a range of practical examples. This book also emphases on carbon based nanomaterials (graphene) as novel materials for applications in modern electrical and electronic devices. The growth and applications of novel graphene technology are also discussed in the book. As new materials and new devices, nano-graphene materials are estimated to be pioneer materials that would surpass the conventional materials in terms of performance as well as cost. This book familiarizes the audience with latest accomplishments of graphene devices, and technological growth. The book is mainly focused at a broad range of audiences ranging from undergraduate students and doctoral fellows to industrial engineers and researchers. However, this book can be used specifically by materials scientists, chemists and physicists to expand their knowledge about synthesis, characterization and applications of graphene based materials.

SF05-503	Understanding the Role of Economic Operators within the Medical Device Regulatory Sector
	Shalinee Naidoo/ 9781774690840/ Price:US$ 170.00

	New and emerging technologies as well as various well-known incidents within the medical device industry have challenged the current framework, highlighted gaps and pointed to a certain scarcity of skills and expertise. For this reason, there was increasing need to update the European Medical Device Directives. This has since led to the development and release of the Medical Device Regulation (MDR 2017/745) which has now put stricter regulatory controls on the entire product life cycle. Both the EU Medical Devices Regulation (MDR) and In Vitro Diagnostic Medical Devices Regulation (IVDR) contain a complete section on economic operators for medical devices. Although the manufacturer is ultimately responsible for ensuring their medical device is compliant with the relevant legislation, the various defined economic operators within the Regulation, now have a part to play in ensuring the safety and performance of the device throughout the supply chain. This new policy of sharing compliance is an important component of the MDR2017/745 with each economic operator serving as a control on the other, causing each device to receive a number of checks throughout the process before it is brought to market. In addition to this, it also allows for any compliance issues emerging from any one of the economic operators to have a direct legal implication on the other. Changes brought about by the MDR2017/745 in Europe require not only manufacturers but all defined economic operators to take a proactive, multilevel and multidisciplinary approach when it comes to ensuring safe and effective devices are placed on the market. This volume looks at each Economic Operator in greater details with their relevant responsibilities.

SF05-503	A Beginners Road Map to the Medical Device Industry
	Shalinee Naidoo/ 9781774691564/ Price:US$ 170.00

	It is estimated that there are over 10 000 different medical devices available on the market today. These devices have become an integral part of health care and a vital component of the various activities carried out by health-care providers to treat people with varying medical conditions all around the world. Regulatory requirements for such devices differ from country to country all around the world which in turn make it difficult for manufacturers to obtain all round market approval for their products. While market approval from regulatory authorities can easily be obtained if a manufacturer can prove the device meets national regulatory guidelines; differences in regulatory requirements between different countries means that a manufacturer?s registration process becomes more complex and ultimately may require additional resources or information. This volume aims to provide a basic roadmap to beginners into the medical device industry. It provides a simplistic overview of the vast history behind much of the regulations and medical technology governing the field today as well as the need and importance of associated medical device regulations and essential principles governing safe and effective manufacture and use of these devices.

SF05-503	Essential Principles of Safety and Effectiveness for Medical Devices
	Shalinee Naidoo/ 9781774691854/ Price:US$ 170.00

	The medical device sector is growing fast. Every day new technology which is both complex and smart are being added to the industry. Ensuring safe and effective use of medical devices for patients and users of the device itself is a crucial responsibility for manufacturers. When designing and manufacturing medical devices, safety, and efficacy should be of utmost importance. A manufacturer should never compromise on the clinical safety requirements of its users, patients or any other persons involved. Generally, the design of a medical device is regulated by the essential principles (EP) of safety and performance. What this means is that if a device is designed to relieve pain, the manufacturer must be able to clinically prove that the device can in fact relieve pain. Often this poses a great deal of challenges to manufacturers; however, building in appropriate safety and risk management functions across a device's lifecycle is imperative if they wish to reduce the risk of post-market problems. This volume aims to provide an overview of the harmonized essential principles that must be achieved in the design and development of medical devices. It provides an in-depth explanation of the relevant medical device regulations in Europe with a specific focus on the safety and performance requirements for medical devices.

SF05-503	How to classify your medical device under European Regulations
	Shalinee Naidoo/ 9781774691878/ Price:US$ 170.00

	Over the last 20 or so years, the number, range, and complexity of medical devices available on the market has increased drastically and as a result, so has the complexity of the regulations involved. With new and emerging technologies as well as various well-known incidents within the medical device industry, the current regulatory framework has since been challenged. In fact, many gaps and scarcity of skills and expertise have been identified. For this reason, there was an increasing need to update the current Medical Device Directive (MDD 93/42/EEC) in the European Union, which in turn led to the development and release of the Medical Device Regulation (EU MDR 2017/745). This volume aims to provide an easy-to-understand guide for beginners to the medical device regulations in Europe with specific focus on classification methods. It looks specifically at how to class a medical device based on the risk associated with it as well the details around the European Classification Systems provided in the MEDDEV 2.4/1. This volume also delves into the detail around defining borderline medical devices and how they are classified according to the Manual on Borderline and Classification in the Community Regulatory Framework for Medical Devices as published by the European Commission.

SF05-503	Polytronics Technology
	Anthony Joseph Hynes/ 9781682518571/ Price:US$ 160.00

	With invention of transistors in early half of nineteenth century, field of electronics had undergone innumerable changes that have had tremendous impact on life of common man. Be it education, entertainment or healthcare, there is possibly no field where electronics had not made an impact. Plastic has been regarded as "insulators" for many years, and is primarily used to protect copper wires. Emerging modern polytronics technology shifts the perspective of people as "Microelectronics" about conducting polymers. This book aims to present an overview of these technologies.

SF05-503	Plastic Solar Cell Technology
	Pascal Fleming/ 9781682518557/ Price:US$ 160.00

	Solar cells use freely available sunlight to make electricity. At the present time, solar electricity does not come cheap, because solar panels are rather expensive. This book is intended to explain the basic working principles of these novel plastic solar cells and then show how a stunning threefold increase in solar energy efficiency can be achieved by including a special additive to the printing ink. This book is intended to provide a comprehensive coverage of modern 'plastic' solar cells, a wide-ranging topic that spans materials science, physics, and chemistry. The aim of this book is to provide a primer for non-experts or researchers in related fields who are curious about this rapidly growing field of interdisciplinary research.

SF05-503	Electrochemistry for Materials Science
	Sichul Lee/ 9781682518236/ Price:US$ 160.00

	Electrochemistry is a branch of physical chemistry that studies the relationship between electrical parameters and the identifiable chemical changes, with electricity considered as an outcome of a particular chemical change. In the past few decades, it has been pushing forward to accomplish an interdisciplinary application, in chemistry, biology, physics, electronics, and other related areas. The aim of this book is to cover the recent advances related to materials used either in electrochemical energy storage, which encompasses supercapacitors and Li ion, Na ion, or other rechargeable batteries, or in electrochemical energy conversion, which includes electrocatalysts, green fuel production, fuel cells, etc.

SF05-503	Fundamentals of Digital Circuits
	Emmanuel Cordier/ 9781682518205/ Price:US$ 160.00

	A digital circuit is a circuit where the signal must be one of two discrete levels. A digital circuit can be used to rectify noise and produce correct signals. As digital circuits are made up of basic logic gates, they are not very expensive. Switching time is much faster as compared to that of analog circuits. Digital electronic circuits are relatively easy to design. It has higher accuracy, programmability. This book is designed for all the readers who are aspiring to learn the concepts of digital circuits.

SF05-503	Introduction to Nanophotonics
	Juan Liu/ 9781682518199/ Price:US$ 160.00

	Nanophotonics deals with the interaction of light with matter at a nanometer scale, providing challenges for fundamental research and opportunities for new technologies, encompassing the study of new optical interactions, materials, fabrication techniques, and architectures, including the exploration of natural and synthetic, or artificially engineered, structures such as photonic crystals, holey fibers, quantum dots, subwavelength structures, and plasmonics. This book is intended to focus on all aspects of the fabrication and application of nanostructures and devices that help to understand or harness and utilize the behavior of light. The book covers a wide variety of scopes in those areas including principles of plasmonics, SPR, LSPR and their applications, graphene-based nanophotonic devices, generation of entangled photon and quantum dots, and perovskite solar cells.

SF05-503	An Introduction to Electrical Science
	Julia Altmeier/ 9781682518182/ Price:US$ 160.00

	Electrical engineering is an engineering discipline concerned with the study, design and application of equipment, devices and systems which use electricity, electronics, and electromagnetism. From the Global Positioning System to electric power generation, electrical engineers have contributed to the development of a wide range of technologies. The book presents the information to provide the reader with a basic level of understanding that is sufficient to understand the advanced theoretical concepts discussed in other subject areas and to better understand the basic system and equipment operations.

	Research Anthology on Smart Grid and Microgrid Development, 3-Vols/Set.
	Information Resources Management Association/ 9781668436660/ Price:US$ 1645.00

	Smart grid and microgrid technology are growing exponentially as they are adopted throughout the world. These new technologies have revolutionized the way electricity is produced, delivered, and consumed, and offer a plethora of benefits as well as the potential for further growth. It is critical to examine the current stage of smart grid and microgrid development as well as the direction they are headed as they continue to expand in order to ensure that cost-effective, reliable, and efficient systems are put in place. The Research Anthology on Smart Grid and Microgrid Development is an all-encompassing reference source of the latest innovations and trends within smart grid and microgrid development. Detailing benefits, challenges, and opportunities, it is a crucial resource to fully understand the current opportunities that smart grids and microgrids present around the world. Covering a wide range of topics such as traditional grids, future smart grids, electrical distribution systems, and microgrid integration, it is ideal for engineers, policymakers, systems developers, technologists, researchers, government officials, academicians, environmental groups, regulators, utilities specialists, industry professionals, and students. Coverage: The many academic areas covered in this publication include, but are not limited to: ‧Data Mining Applications ‧Distributed Grid Ecosystems ‧Electrical Distribution System ‧FLC Technique ‧Future Smart Grids ‧Intelligent Grid Networks ‧Microgrid Integration ‧Microgrids ‧RES-Based Microgrids ‧Smart Cities ‧Smart DC Microgrid ‧Smart Grids ‧Traditional Grids

	Graphene Composite Supercapacitor Electrodes
	David J. Fisher/ 9781644901922/ Price:US$ 125.00

	Graphene supercapacitors, also called ultracapacitors or electrical double-layer capacitors, have increasingly begun to rival conventional batteries. They allow to manipulate the nanoscale structure of carbon-based supercapacitors and offer the additional advantage of sequestering increasing amounts of carbon from the environment, thus helping to limit global warming. The book focuses on the choice of electrode materials, their properties and methods of fabrication. It references 494 original resources with their direct web links for in-depth reading.

VF05-108	Hydrogen Fuel Cell Technology for Stationary Applications
	Gheorghe Badea/ 9781799849452/ Price:US$ 240.00

	Unconventional energy sources have gained and will continue to gain an increasing share of energy systems around the world. Today, hydrogen is recognized as a non-polluting energy carrier because it does not contribute to global warming if it is produced from renewable sources. Hydrogen is already part of today's chemical industry, but as an energy source, its rare advantages can only be obtained with the help of technologies. Currently, the fuel cell is considered the cleanest sustainable energy. With the development of fuel cells, hydrogen-based energy generation becomes a reality. Hydrogen Fuel Cell Technology for Stationary Applications is an essential publication that focuses on the advantages of hydrogen as a primary energy center and addresses its use in the sustainable future of stationary applications. While highlighting a broad range of topics including cost expectations, production methods, and social impact, this publication explores all aspects of the implementation and dissemination of fuel cell technology in the hope of establishing a sustainable marketplace for it. This book is ideally designed for fuel cell manufacturers, architects, electrical engineers, civil engineers, environmental engineers, advocates, manufacturers, mechanics, researchers, academicians, and students. Topics Covered The many academic areas covered in this publication include, but are not limited to: ‧Alternative Energy Resources ‧Cost Expectations ‧Deployment ‧Distribution and Transmission Networks ‧Energy Systems ‧Marketing ‧Production Methods ‧Regulation and Standardization ‧Safety Issues ‧Social Impact ‧Storage Technologies

VF05-107	Computational Methodologies for Electrical and Electronics Engineers
	Rajiv Singh/ 9781799833277/ Price:US$ 250.00

	Artificial intelligence has been applied to many areas of science and technology, including the power and energy sector. Renewable energy in particular has experienced the tremendous positive impact of these developments. With the recent evolution of smart energy technologies, engineers and scientists working in this sector need an exhaustive source of current knowledge to effectively cater to the energy needs of citizens of developing countries. Computational Methodologies for Electrical and Electronics Engineers is a collection of innovative research that provides a complete insight and overview of the application of intelligent computational techniques in power and energy. Featuring research on a wide range of topics such as artificial neural networks, smart grids, and soft computing, this book is ideally designed for programmers, engineers, technicians, ecologists, entrepreneurs, researchers, academicians, and students. Topics Covered The many academic areas covered in this publication include, but are not limited to: ‧Artificial Neural Networks ‧Big Data Analysis ‧Cloud Computing ‧Fuzzy Systems ‧Machine Learning ‧Optimization ‧Renewable Energy ‧Smart Computing ‧Smart Energy ‧Smart Grids ‧Soft Computing

VF05-105	Optimizing and Measuring Smart Grid Operation and Control
	Abdelmadjid Recioui/ 9781799840275/ Price:US$ 250.00

	Smart grid (SG), also called intelligent grid, is a modern improvement of the traditional power grid that will revolutionize the way electricity is produced, delivered, and consumed. Studying key concepts such as advanced metering infrastructure, distribution management systems, and energy management systems will support the design of a cost-effective, reliable, and efficient supply system, and will create a real-time bidirectional communication means and information exchange between the consumer and the grid operator of electric power. Optimizing and Measuring Smart Grid Operation and Control is a critical reference source that presents recent research on the operation, control, and optimization of smart grids. Covering topics that include phase measurement units, smart metering, and synchrophasor technologies, this book examines all aspects of modern smart grid measurement and control. It is designed for engineers, researchers, academicians, and students. Topics Covered The many academic areas covered in this publication include, but are not limited to: ‧Data Infrastructure ‧Hybrid Energy Storage Systems ‧Microgrid System ‧Phasor Measurement Unit ‧Renewable Energy ‧Smart Grid ‧Smart Metering ‧Smart Power Grid ‧Synchrophasor Technology

VF05-104	Innovative Applications of Nanowires for Circuit Design
	Balwinder Raj/ 9781799864677/ Price:US$ 250.00

	Nanowires are an important sector of circuit design whose applications in very-large-scale integration design (VLSI) have huge impacts for bringing revolutionary advancements in nanoscale devices, circuits, and systems due to improved electronic properties of the nanowires. Nanowires are potential devices for VLSI circuits and system applications and are highly preferred in novel nanoscale devices due to their high mobility and high-driving capacity. Although the knowledge and resources for the fabrication of nanowires is currently limited, it is predicted that, with the advancement of technology, conventional fabrication flow can be used for nanoscale devices, specifically nanowires. Innovative Applications of Nanowires for Circuit Design provides relevant theoretical frameworks that include device physics, modeling, circuit design, and the latest developments in experimental fabrication in the field of nanotechnology. The book covers advanced modeling concepts of nanowires along with their role as a key enabler for innovation in GLSI devices, circuits, and systems. While highlighting topics such as design, simulation, types and applications, and performance analysis of nanowires, this book is ideally intended for engineers, practitioners, stakeholders, academicians, researchers, and students interested in electronics engineering, nanoscience, and nanotechnology. Topics Covered The many academic areas covered in this publication include, but are not limited to: ‧Electronics Engineering ‧Field Effect Transistors ‧Home Automation ‧Integrated Circuit Design ‧Integrated Circuit Implementation ‧Nanoscience ‧Nanotechnology ‧Nanowires ‧Performance Analysis ‧SRAM Cell Design

VF05-103	Design and Investment of High Voltage NanoDielectrics
	Ahmed Thabet Mohamed/ 9781799838296/ Price:US$ 215.00

	Nanotechnology has emerged as a trending research area as its industrial uses continue to multiply. Some specific areas that have benefited from the dynamic properties of nanomaterials are high voltage electronics and electrical engineering. Nanoparticles have created new avenues for engineers to explore within these fields; however, significant research on this subject is lacking. Design and Investment of High Voltage NanoDielectrics is a collection of innovative research on the methods and application of nanoparticles in high voltage insulations and dielectric properties. This book discusses the wide array of uses nanoparticles have within high voltage electrics engineering and the diverse polymeric properties that nanomaterials help make prevalent. While highlighting topics including electrical degradation, magnetic materials, and fundamental polymers, this book is ideally designed for researchers, engineers, industry professionals, practitioners, scientists, managers, manufacturers, analysts, students, and educators seeking current research on the dielectric properties of modern nanocomposite materials. Topics Covered The many academic areas covered in this publication include, but are not limited to: ‧Composite Materials ‧Computational Physics ‧Dielectrics ‧Electrical Degradation ‧Electronic Materials ‧Fundamental Polymers ‧High Voltage Engineering ‧Magnetic Materials ‧Nanoparticles ‧Prediction Models ‧Space Charge

VF05-102	Research Advancements in Smart Technology, Optimization, and Renewable Energy
	Pandian Vasant/ 9781799839705/ Price:US$ 250.00

	As environmental issues remain at the forefront of energy research, renewable energy is now an all-important field of study. And as smart technology continues to grow and be refined, its applications broaden and increase in their potential to revolutionize sustainability studies. This potential can only be fully realized with a thorough understanding of the most recent breakthroughs in the field. Research Advancements in Smart Technology, Optimization, and Renewable Energy is a collection of innovative research that explores the recent steps forward for smart applications in sustainability. Featuring coverage on a wide range of topics including energy assessment, neural fuzzy control, and biogeography, this book is ideally designed for advocates, policymakers, engineers, software developers, academicians, researchers, and students. Topics Covered The many academic areas covered in this publication include, but are not limited to: ‧Algorithms ‧Biogeography ‧Economic Load Dispatch ‧Electric Power Sector ‧Energy Assessment ‧Energy Management Strategies ‧Grey Wolf Optimization ‧Hybrid Systems ‧Neural Fuzzy Control ‧System Optimization ‧Teaching-Learning-Based Optimization

SF05-505	Fundamentals of Terahertz Devices and Applications
	Dimitris Pavlidis/ 9781119460718/ Price:US$ 135.00



SF05-498	Foundation Course for Electrical Engineering Technician (Book With DVD)
	3G Editorial Board/ 9781984646811/ Price:US$ 90.00

	This course introduces how to select, design, install, maintain, program and troubleshoot modern industrial, electrical and electronic systems. Interpret and produce electrical and electronics drawings. Analyze and solve routine technical problems related to electrical systems by applying mathematics and science principles.

SF05-498	3GE Collection on Engineering: Smart Card Technology
	3G Editorial Board/ 9781984647245/ Price:US$ 160.00

	Smart cards are becoming commonplace around the world, used in financial, healthcare, identity, security, and transportation and telecommunications applications. Includes the fundamental topics that will help one understand the more advanced concepts of smart card technology. The book provides a thorough overview of the basic components of smart card technology and the many security and payments applications for which smart cards are used throughout the global marketplace.

SF05-498	Illustrated Handbook of Fusion Technology
	3G Editorial Board/ 9781984647627/ Price:US$ 160.00

	Introduces the range of topics relevant to plasma physics and fusion engineering. Teach the basic principles and underlying physics of producing energy from fusion of hydrogen. Intended to impart education in fusion technology and radiation safety.

SF05-498	Foundation Course for Electrical Drafter (Book With DVD)
	3G Editorial Board/ 9781984646804/ Price:US$ 90.00

	Electrical drafters formulate charts, plans and drawings that consist of electric wiring designs, which are used to set up and restore electrical equipment. This course introduces the full range of electrical building services topics from the fundaments to power system design, wiring accessories, cable management system, lighting systems, earthling, fire alarm systems, CCTV systems, and access control systems etc.

SF05-497	Research and Development in Surface Engineering
	Michel L. Kear/ 9781682517949/ Price:US$ 160.00

	Surface coating is a simple and inexpensive method for surface modification of the membrane and it can be done easily in industrial operations and also on a large scale. In this way, the membrane surface is covered by a coated layer. This book will study the material base-surface multilayer system for various types of depositions whose compatibility with the substrate provides high-quality parts. Thus, this system of layers can be applied on both the new and worn parts, being able to recondition and reintroduce in an intensive exploitation regime any parts with complex configuration operating in dynamic conditions. This book includes a review of the state of the art and industrial implementation of some of the most used surface treatment techniques for the improvement of the different types of prostheses, paying special attention to the most used solutions and the future possibilities of advanced surface treatment techniques.

SF05-497	Operation and Control of Power Systems
	Jamie Linder/ 9781682517932/ Price:US$ 160.00

	Electrical energy is conserved at every step in the process of Generation, Transmission, Distribution and also utilization of electrical energy. As economies and populations grow, there is also a growing need to enhance the security, capacity and flexibility of power transmission systems. Reliable electrical grids are one of the main infrastructures supporting the developed economy and one of the key premises for the developing economy. The trend in power system planning uses tight operating margins, with less redundancy due to new constraints due to economic and environmental factors. Traditional entities involved in ensuring adequate protection and control of the system may soon become inadequate, and the emergence of new participants (nonutility generation, transmission and distribution companies) requires a coordinated approach and careful coordination of the new operating conditions. This book provides an overview of the power systems operation, control and managing tools.

SF05-497	Computational Methods for Electric Power Systems
	Nahla Colangelo/ 9781682517925/ Price:US$ 160.00

	The latest research directions in the Power Engineering field were motivated by the current technological developments and the gradual implementation of the “Smart Grids” concept. The planning and operation of modern power systems requires an efficient management of large databases, essential in the decision-making process, which enables obtaining the best solutions. These approaches are used in all stages of the decision-making process, but especially for overcoming difficulties in multiobjective modeling, handling of constraints, and uncertainty considerations. This book presents state-of-the-art overview on the currently applied computational methods for the simulation and analysis of electromagnetic transients in complex power systems. It is intended to highlight the innovative solutions obtained using the latest models and techniques developed in the planning and operation of modern power systems.

SF05-497	Plasma Nanoengineering and Nanofabrication
	Shigeru E. Gordon/ 9781682517857/ Price:US$ 160.00

	The research field of nanomaterials (NMs) has established swiftly over the last several years due to the unique electrical, optical, magnetic and catalytic properties of these materials. Plasma technology is currently gaining considerable attention as a prominent “green” synthesis method for nanomaterials, due to its identifying properties when contrasted to solid, liquid and gas phase synthesis approaches. This book highlights plasma spraying as a technique for synthesizing nanostructured coatings and bulk materials for several functional applications. In this book, you will also study the influence of plasma processing regimes on structural changes and, therefore, steel hardness. This book also summarizes other functional applications such as thermal barrier coatings, biomedical applications, sensors, near-net form processing, and solar cells.

SF05-497	Electrical Drives: Principles, Planning, Applications
	Junic Novotna/ 9781682517529/ Price:US$ 160.00

	The growing use of electric machines and drives in more critical applications has pushed forward the research in the area of condition monitoring and fault tolerance, leading to the development of more reliable diagnostic techniques and more fault-tolerant machines. The current book aims to present and disseminate the most recent advances related to the theory, design, modelling, application, control, and condition monitoring of all types of rotating electric machines. The book also proposes self-tuning PI controller for the speed control of electrical motor drives. The subject of this book is an important and diverse field of electric machines and drives. This book provides a comprehensive introduction into the fundamental physics and basic technical principles of drive technology.

SF05-497	Genetic Algorithms and Engineering Design
	Florian Mayer/ 9781682517147/ Price:US$ 160.00

	A genetic algorithm (GA) is a search and optimization method which works by mimicking the evolutionary principles and chromosomal processing in natural genetics. Genetic algorithm is a multi-path algorithm that searches many peaks in parallel, hence reducing the possibility of local minimum trapping and solve the multi-objective optimization problems. The last few years have seen important advances in the use of genetic algorithms applied to a wide variety of engineering problems, because of their simplicity, global perspective, and inherent parallel processing. This book explains the basic technique of the genetic algorithm and shows how design engineers can use a genetic algorithm to solve real design engineering problems. The book focuses on explaining how genetic algorithms work. This book is intended to demonstrate Genetic Algorithms to locate robust design areas and provided a thorough discussion on robustness and diversity in depth.

SF05-497	Research and Development on Sensors and Actuators in Mechatronics
	Ramayah Woschank/ 9781682517024/ Price:US$ 160.00

	Microelectromechanical systems (MEMS) is a miniaturization technology primarily embraced by the Integrated Circuit (IC) industry and adhered to the miniaturization of all devices not only electrical, but also mechanical, optical, hydraulic, magnetic, etc. This book sheds light on a highly promising & demanding technology, which is set to revolutionize nearly every product category in present era, while discussing the Concept, Design & Development, Fabrication techniques and applications of micro electro-mechanical systems (MEMS) based Devices or systems. This book deals with research and the development of micro-electromechanical system (MEMS) sensor and actuators technology, to consider its current use in sensing technology and to identify and discuss future technological trends and directions in today’s life of technology. This book also highlights commercial and real life applications of MEMS and discusses various recent technological innovations carried out with their advantages & disadvantages.

SF05-497	Mechatronics and Robotics
	Zoran Gacovski/ 9781774077757/ Price:US$ 170.00

	Section 1 focuses on mechatronics basics, describing a brief history of industrial robotics in the 20th century; an IoT model for cyber-physical manufacturing systems; 3+1 SysML view-model in model integrated mechatronics; design and development of mechatronic application in agricultural irrigation device. Section 2 focuses on robotics arms and manipulators, describing design and development of a competitive low-cost robot arm with four degrees of freedom; an adaptive robust approach to modeling and control of flexible arm robots; interactive heuristic d* path planning solution based on PSO for two-link robotic arm in dynamic environment; optimal task placement of a serial robot manipulator for manipulability and mechanical power optimization; kinematical analysis and simulation of high-speed plate carrying manipulator based on Matlab. Section 3 focuses on sensors in mechatronics, describing flexible impact force sensor; a sensing and robot navigation of hybrid sensor network; a study on vehicle detection and tracking using wireless sensor networks; deployment of pre-industrial autonomous microbe sensor in Saudi Arabia's injection seawater system. Section 4 focuses on actuators, describing a survey of modeling and control of piezoelectric actuators; experimental investigation of photostrictive materials for MEMS application; theory and simulation analysis of the mode shape and normal shape actuators and sensors; experimental study of the response of transonic diffuser flow to a piezoceramic actuator at diffuser throat; an ARX-based PID-sliding mode control on velocity tracking control of a stick-slip Pi-ezoelectric-driven actuator.

	Handbook of Research on 5G Networks and Advancements in Computing, Electronics, and Electrical Engineering
	Augustine O. Nwajana/ 9781799869924/ Price:US$ 325.00

	The Handbook of Research on 5G Networks and Advancements in Computing, Electronics, and Electrical Engineering focuses on current technological innovations as the world rapidly heads towards becoming a global smart city. It covers important topics such as power systems, electrical engineering, mobile communications, network, security, and more. This book examines vast types of technologies and their roles in society with a focus on how each works, the impacts it has, and the future for developing a global smart city. This book is ideal for both industrial and academic researchers, scientists, engineers, educators, practitioners, developers, policymakers, scholars, and students interested in 5G technology and the future of engineering, computing, and technology in human society. Coverage: The many academic areas covered in this publication include, but are not limited to: ‧5G Networks ‧Antennas ‧Artificial Intelligence ‧Computing ‧Electrical Engineering ‧Energy Engineering ‧Microwave Engineering ‧Mobile Communications ‧Nanoelectronics ‧Network and Cyber Security ‧Smart Societies ‧Unmanned Aerial Vehicles (UAVs)

VF05-99	Practical Approach to Substrate Integrated Waveguide (SIW) Diplexer: Emerging Research and Opportunities
	Augustine Onyenwe Nwajana/ 9781799820840/ Price:US$ 215.00

	Substrate integrated waveguide (SIW) technology is a twenty-first century transmission line that has evolved recently to open new doors to the development of efficient circuits and devices operating in the microwave and millimeter-wave frequency range. Microstrip circuits and devices are inefficient at high frequency applications and require very stringent manufacturing tolerances when used to implement microwave and millimeter-wave components. This is as a result of the fact that wavelengths are short at higher frequencies. Waveguide circuits and devices are preferred for higher frequency applications, but they are expensive and difficult to manufacture. It is also very challenging to integrate a waveguide device with planar devices in its vicinity. The SIW bridges the gap between the traditional air-filled waveguide and planar transmission lines such as microstrip. Practical Approach to Substrate Integrated Waveguide (SIW) Diplexer: Emerging Research and Opportunities is an essential reference source that discusses the development of efficient circuits and devices operating in the microwave and millimeter-wave frequency range through the use of substrate integrated waveguides. Featuring research on topics such as microstrip resonators, circuit model analysis, and quality factor extraction, this book is ideally designed for researchers, engineers, scientists, developers, scholars, practitioners, educators, policymakers, and students. Topics Covered The many academic areas covered in this publication include, but are not limited to: ‧Circuit Model Analysis ‧Efficient Circuits ‧Filters Classification ‧Immittance Inverters ‧Microstrip Resonators ‧Microwave Filter Design ‧Multiplexer/Diplexer ‧Quality Factor Extraction ‧SIW Cavity ‧SIW Transition ‧Substrate Integrated Waveguide ‧Transmission Lines ‧Waveguide Integration ‧Wavelength Frequencies

VF05-98	Sensor Technology: Concepts, Methodologies, Tools, and Applications, 3-Vols/Set.
	Information Resources Management Association/ 9781799824541/ Price:US$ 930.00

	Collecting and processing data is a necessary aspect of living in a technologically advanced society. Whether it’s monitoring events, controlling different variables, or using decision-making applications, it is important to have a system that is both inexpensive and capable of coping with high amounts of data. As the application of these networks becomes more common, it becomes imperative to evaluate their effectiveness as well as other opportunities for possible implementation in the future. Sensor Technology: Concepts, Methodologies, Tools, and Applications is a vital reference source that brings together new ways to process and monitor data and to put it to work in everything from intelligent transportation systems to healthcare to multimedia applications. It also provides inclusive coverage on the processing and applications of wireless communication, sensor networks, and mobile computing. Highlighting a range of topics such as internet of things, signal processing hardware, and wireless sensor technologies, this multi-volume book is ideally designed for research and development engineers, IT specialists, developers, graduate students, academics, and researchers. Topics Covered The many academic areas covered in this publication include, but are not limited to: ‧Energy Efficiency ‧Internet of Things ‧Multimedia Applications ‧Signal Processing Hardware ‧Smart Sensors ‧System Optimization ‧Tracking Technologies ‧Transducer ‧Wireless Sensor Networks ‧Wireless Sensor Technologies

VF05-97	Handbook of Research on New Solutions and Technologies in Electrical Distribution Networks
	Baseem Khan/ 9781799812302/ Price:US$ 300.00

	As the electrical industry continues to develop, one sector that still faces a range of concerns is the electrical distribution system. Excessive industrialization and inadequate billing are just a few issues that have plagued this electrical sector as it advances into the smart grid environment. Research is necessary to explore the possible solutions in fixing these problems and developing the distribution sector into an active and smart system. The Handbook of Research on New Solutions and Technologies in Electrical Distribution Networks is a collection of innovative research on the methods and applications of solving major issues within the electrical distribution system. Some issues covered within the publication include distribution losses, improper monitoring of system, renewable energy integration with micro-grid and distributed energy sources, and smart home energy management system modelling. This book is ideally designed for power engineers, electrical engineers, energy professionals, developers, technologists, policymakers, researchers, academicians, industry professionals, and students seeking current research on improving this key sector of the electrical industry. Topics Covered The many academic areas covered in this publication include, but are not limited to: ‧Demand Side Management ‧Distribution Losses ‧Existing Issues ‧Harmonics Mitigation ‧Maintenance Issues ‧Micro-Grid Technologies ‧Reliability Assessment ‧Reliability Enhancement ‧Smart Meters ‧Smart Sensors ‧Voltage Dip

VF05-96	Major Applications of Carbon Nanotube Field-Effect Transistors (CNTFET)
	Balwinder Raj/ 9781799813934/ Price:US$ 205.00

	With recent advancements in electronics, specifically nanoscale devices, new technologies are being implemented to improve the properties of automated systems. However, conventional materials are failing due to limited mobility, high leakage currents, and power dissipation. To mitigate these challenges, alternative resources are required to advance electronics further into the nanoscale domain. Carbon nanotube field-effect transistors are a potential solution yet lack the information and research to be properly utilized. Major Applications of Carbon Nanotube Field-Effect Transistors (CNTFET) is a collection of innovative research on the methods and applications of converting semiconductor devices from micron technology to nanotechnology. The book provides readers with an updated status on existing CNTs, CNTFETs, and their applications and examines practical applications to minimize short channel effects and power dissipation in nanoscale devices and circuits. While highlighting topics including interconnects, digital circuits, and single-wall CNTs, this book is ideally designed for electrical engineers, electronics engineers, students, researchers, academicians, industry professionals, and practitioners working in nanoscience, nanotechnology, applied physics, and electrical and electronics engineering. Topics Covered The many academic areas covered in this publication include, but are not limited to: ‧Analog Circuits ‧Applications of CNTFET ‧Characterization of CNTFET ‧Digital Circuits ‧DRAM Cell Design ‧Future of CNTFET ‧Interconnects ‧Logic Gates ‧Sensor Design ‧Single-Wall CNTs ‧SRAM Cell Design

VF05-95	Electrical Insulation Breakdown and Its Theory, Process, and Prevention: Emerging Research and Opportunities
	Boxue Du/ 9781522588856/ Price:US$ 240.00

	In electrical engineering manufacturing, one of the most important processes stems from making sure the material used to distribute the electrical current is safe and operating correctly. The precarious nature of electricity makes developing innovative material for advanced safety a high-ranking priority for researchers. Electrical Insulation Breakdown and Its Theory, Process, and Prevention: Emerging Research and Opportunities provides innovative insights into the latest developments and achievements in high voltage insulation breakdown. Featuring topics such as nanodielectrics, thermal stability, and transmission technology, it is designed for engineers, including those that work with high voltage power systems, researchers, practitioners, professionals, and students interested in the upkeep and practice of electric material safety. Topics Covered The many academic areas covered in this publication include, but are not limited to: ‧Electric Field Distribution ‧Electrical Engineering ‧Insulation Failure ‧Material Science ‧Mechanical Stress ‧Nanodielectrics ‧Polymetric Material ‧Thermal Aging ‧Thermal Stability ‧Transmission Technology

VF05-94	Handbook of Research on Recent Developments in Electrical and Mechanical Engineering
	Jamal Zbitou/ 9781799801177/ Price:US$ 285.00

	Technological advancements continue to enhance the field of engineering and have led to progress in branches that include electrical and mechanical engineering. These technologies have allowed for more sophisticated circuits and components while also advancing renewable energy initiatives. With increased growth in these fields, there is a need for a collection of research that details the variety of works being studied in our globalized world. The Handbook of Research on Recent Developments in Electrical and Mechanical Engineering is a pivotal reference source that discusses the latest advancements in these engineering fields. Featuring research on topics such as materials manufacturing, microwave photons, and wireless power transfer, this book is ideally designed for graduate students, researchers, engineers, manufacturing managers, and academicians seeking coverage on the works and experiences achieved in electrical and mechanical engineering. Topics Covered The many academic areas covered in this publication include, but are not limited to: ‧Antennas ‧Energy Harvesting ‧Materials Manufacturing ‧Metamaterials ‧Microwave Photons ‧Passive Components ‧Planar Filters ‧Renewable Energy ‧Terahertz Circuits ‧Wireless Power Transfer

VF05-93	Novel Advancements in Electrical Power Planning and Performance
	Smita Shandilya/ 9781522585510/ Price:US$ 250.00

	As the demand for efficient energy sources continues to grow, electrical systems are becoming more essential to meet these increased needs. Electrical generation and transmission plans must remain cost-effective, reliable, and flexible for further future expansion. As these systems are being utilized more frequently, it becomes imperative to find ways of optimizing their overall function. Novel Advancements in Electrical Power Planning and Performance is an essential reference source that provides vital research on the specific challenges, issues, strategies, and solutions that are associated with electrical transmission and distribution systems and features emergent methods and research in the systemic and strategic planning of energy usage. Featuring research on topics such as probabilistic modeling, voltage stability, and radial distribution, this book is ideally designed for electrical engineers, practitioners, power plant managers, investors, industry professionals, researchers, academicians, and students seeking coverage on the methods and profitability of electrical expansion planning. Topics Covered The many academic areas covered in this publication include, but are not limited to: ‧Anchor Mobility Control ‧Fault Analysis ‧Grey Wolf Optimization ‧Moth-Flame Optimization ‧Power Flow ‧Probabilistic Modeling ‧Radial Distribution ‧Reactive Compensation ‧Renewable Energy ‧Voltage Stability

VF05-92	Design and Optimization of Sensors and Antennas for Wearable Devices: Emerging Research and Opportunities
	Vinod Kumar Singh/ 9781522596837/ Price:US$ 240.00

	Wearable continuous monitoring systems are necessary in risky environments such as mining and diving and are especially important in the medical monitoring of patients both in medical facilities and at home. All these applications of monitoring with data transmission functions can be achieved by using wearable antennas. Recently, possibilities of connecting completely independent appliances with textiles have emerged. However, full success will be achieved only when antennas and all related components are entirely converted into 100% textile materials. Design and Optimization of Sensors and Antennas for Wearable Devices: Emerging Research and Opportunities provides innovative insights on the development of adaptable materials and textile antennas that can be used in the construction of wearable devices that are biocompatible and offer high conductivity, low cost, simplistic manufacturing, are comfortable for the wearer, and are water/climate safe and condition amicable. The content within this publication examines data transmission, wearable computing, and medical applications. It is designed for engineers, manufacturers, researchers, academicians, and scientists who are interested in the development of wearable technologies. Topics Covered The many academic areas covered in this publication include, but are not limited to: ‧Antennas ‧Data Transmission ‧Electrical Streams ‧Medical Applications ‧Monitoring Systems ‧Opto-Electronics ‧Radio Communication ‧Textiles ‧Wearable Computing ‧Wireless Networks

VF05-101	Cyber Security and Safety of Nuclear Power Plant Instrumentation and Control Systems
	Michael A. Yastrebenetsky/ 9781799832775/ Price:US$ 215.00

	Safety and security are crucial to the operations of nuclear power plants, but cyber threats to these facilities are increasing significantly. Instrumentation and control systems, which play a vital role in the prevention of these incidents, have seen major design modifications with the implementation of digital technologies. Advanced computing systems are assisting in the protection and safety of nuclear power plants; however, significant research on these computational methods is deficient. Cyber Security and Safety of Nuclear Power Plant Instrumentation and Control Systems is a pivotal reference source that provides vital research on the digital developments of instrumentation and control systems for assuring the safety and security of nuclear power plants. While highlighting topics such as accident monitoring systems, classification measures, and UAV fleets, this publication explores individual cases of security breaches as well as future methods of practice. This book is ideally designed for engineers, industry specialists, researchers, policymakers, scientists, academicians, practitioners, and students involved in the development and operation of instrumentation and control systems for nuclear power plants, chemical and petrochemical industries, transport, and medical equipment. Topics Covered The many academic areas covered in this publication include, but are not limited to: ‧Accident Monitoring Systems ‧Assurance Cases ‧Classification Measures ‧Field Applications ‧Gate Array Technology ‧Markov’s Model ‧Robust Systems ‧Safety Composition ‧Security Vulnerabilities ‧UAV Fleets

VF05-100	Applications of Artificial Intelligence in Electrical Engineering
	Saifullah Khalid/ 9781799827184/ Price:US$ 270.00

	Artificial intelligence is increasingly finding its way into industrial and manufacturing contexts. The prevalence of AI in industry from stock market trading to manufacturing makes it easy to forget how complex artificial intelligence has become. Engineering provides various current and prospective applications of these new and complex artificial intelligence technologies. Applications of Artificial Intelligence in Electrical Engineering is a critical research book that examines the advancing developments in artificial intelligence with a focus on theory and research and their implications. Highlighting a wide range of topics such as evolutionary computing, image processing, and swarm intelligence, this book is essential for engineers, manufacturers, technology developers, IT specialists, managers, academicians, researchers, computer scientists, and students. Topics Covered The many academic areas covered in this publication include, but are not limited to: ‧Algorithms ‧Artificial Neural Network ‧Big Data ‧Cloud Computing ‧Computational Intelligence ‧Evolutionary Computing ‧Fuzzy Optimization ‧Image Processing ‧Machine Learning ‧Swarm Intelligence

SF05-490	3GE Collection on Engineering: Engineering Electromagnetics
	3G Editorial Board/ 9781984635761/ Price:US$ 160.00

	Electromagnetism has important scientific and technological applications. It is used in many electrical appliances to generate desired magnetic fields. Knowledge of the principles of electromagnetism can help detect problems as well as avoid them. This collection provides the foundations of electromagnetic theory, with applications in electrical and electronic engineering. Equips students with a thorough theoretical understanding of electromagnetic field equations with a variety of applications.

SF05-490	3GE Collection on Engineering: Electrodynamics
	3G Editorial Board/ 9781984636058/ Price:US$ 160.00

	Covers the theory of electromagnetic fields in matter, and the theory of the macroscopic electric and magnetic properties of matter. Provides a comprehensive introduction to Electromagnetism, aimed at undergraduate students.

SF05-490	Technology of 3D Printing and Additive Manufacturing
	N P Fuchimoto/ 9781682516867/ Price:US$ 160.00

	In recent years, 3D printing has developed significantly and can now perform crucial roles in many applications, with the most important being manufacturing, medicine, and architecture. Using the additive process, layers of materials in liquid, solid or material form are fused together. 3D printers thus use additive manufacturing or direct digital manufacturing technology to produce proto type of a product. This book contains selected topics on advanced technologies for 3D printing and additive manufacturing and how these technologies have changed the face of direct, digital technologies for rapid production of models, and prototypes.

SF05-487	Design of Electrical Power Systems
	C. N. Miao/ 9781682516898/ Price:US$ 160.00

	A power system is the high voltage electrical grid with all it components: generation, transmission, distribution and protection, it is a field with the utmost importance (as important as electricity itself). The power systems that are of interest for our purposes are the large scale, full power systems that span large distances and have been deployed over decades by power companies. The book includes topics such as fundamentals of energy-handling electric circuits, power electronic circuits such as inverters, and electromechanical apparatus.

SF05-487	Electric Power Transmission: Principles and Calculations
	A P Khuder/ 9781682516904/ Price:US$ 160.00

	Electric power transmission is the bulk movement of electrical energy from a generating site, such as a power plant, to an electrical substation. Although huge infrastructural projects for the development of interconnections are at several stages, the associated transmission burdens are not yet fully incorporated in the respective socioeconomic analysis. In this respect, the aim of this book is to present a collective summary of electricity transmission burdens and their associated impacts.

SF05-487	Technical Drafting: Intermediate (Book with DVD)
	3G Editorial Board/ 9781984634337/ Price:US$ 110.00

	Present discipline of composing drawings that visually communicate how something functions or is to be constructed. Combines many different practical and visual skills with knowledge of specialized materials and techniques. Subject matter has been fully revised in such a way that makes the concepts clear and understandable to readers.

SF05-487	Transmission Line Installation and Maintenance: Intermediate (Book with DVD)
	3G Editorial Board/ 9781984634412/ Price:US$ 110.00

	Introduces the knowledge and skills for those studying and/or working in mechanical industry to interpret and convey information in response to workplace requirements. Specifically, this book involves competencies in inspecting transmission line, poles, towers and appurtenances, performing ground transmission line works and performing overhead maintenance works on 69kv and below.

SF05-487	Basic Electronics (Book with DVD)
	3G Editorial Board/ 9781984634436/ Price:US$ 110.00

	Focuses on the basic concepts of electrical and electronic devices, power supplies, and their use as elements, practical applications, and troubleshooting. Covers the fundamentals of basic electronic circuits and key components: their device characteristics, mathematical modeling and representation and behavioural patterns as well as the extension of the circuit analysis techniques. This second edition is revised and updated with the latest information and new chapters are added.

SF05-487	Micro Fuel Cells: Principles and Applications
	I. R. Hakuta/ 9781682515969/ Price:US$ 160.00

	Today we are witnessing a global energy crisis due to huge energy demands and limited resources. Non-renewable energy sources are depleting and renewable energy sources are not properly utilized. Recently, great attentions have been paid to microbial fuel cells (MFCs) due to their mild operating conditions and using variety of biodegradable substrates as fuel. This book demonstrates the improvement of MFCs with summarization of their advantageous and possible applications in future application. Also, different key factors affecting bioelectricity generation on MFCs were investigated and these key parameters are fully discussed.

SF05-487	Electromagnetic Field Theory: An Integrated Approach
	M B Sviridenkova/ 9781682516300/ Price:US$ 160.00

	An electromagnetic field is a physical field produced by electrically charged objects. Knowledge of the principles of electromagnetism can help detect problems as well as avoid them. Electromagnetism can also cause conductors in a raceway or cable tray to move or jump, because of field interaction. This has all kinds of implications, and it must be considered during design and construction. This book includes contributions on field theory and advanced computational electromagnetics; electrical machines and transformers; optimization and interactive design; electromagnetics in materials; coupled field and electromagnetic.

SF05-487	Technology of Automatic Control Systems
	David Vallee/ 9781682516744/ Price:US$ 160.00

	Automatic control systems, wherein a variable quantity is made to conform to a predetermined level, have been in use for several centuries; but, as with much technological development, the most rapid advances have taken place during recent years. Advantages commonly attributed to automation include higher production rates and increased productivity, more efficient use of materials, better product quality, improved safety, shorter workweeks for labour, and reduced factory lead times. This book presents the fundamental principles and challenges encountered in the automatic control of systems, providing practical solutions and signifying alternatives.

SF05-487	Electric Power Distribution Line Construction: Intermediate (Book with DVD)
	3G Editorial Board/ 9781984633941/ Price:US$ 110.00

	Contains various different practical and visual skills with knowledge of specialized materials and techniques. This book contains competencies that a person must possess to erect electric distribution pole, climb pole and install pole assembly and conductors, install single-phase distribution line equipment and devices as well as to install single-phase consumer service connection facility.

SF05-487	Scientific Principles and Technique of Optical Fabrication Processes
	Maria Emilova Velinova/ 9781774072004/ Price:US$ 170.00

	Scientific Principles and Technique of Optical Fabrication Processes deals with the scientific principles involved in the process of optical fabrication. It includes design and fabrication of fiber-optic nanoprobes for optical sensing, development of materials for next generation optical fiber and research progress of optical fabrication and surface-microstructure modification of sic. This book also discusses about effects of process parameters on material removal in vibration-assisted polishing of micro-optic mold, a review on methods for detection of subsurface damage, evaluation of the surface roughness based on acoustic emission signals in robot assisted polishing, laser damage resistance of polystyrene opal photonic crystals and impact of the polishing suspension concentration on laser damage of classically manufactured and plasma post-processed zinc crown glass surfaces.

SF05-487	Materials and Mechanics for Electrochemical Energy Conversion
	Lokesh Pandey/ 9781774072356/ Price:US$ 170.00

	Materials and Mechanics for Electrochemical Energy Conversion discusses the fundamental mechanics of electrochemical energy conversion and different technologies related to it. It also includes the development and conversion technologies of electrochemical energy. It provides the reader with the concept of electrochemical energy conversion so as to understand the technologies involved in the conversion process, storage devices and nanomaterials involved and the application of photo-electrochemical cells and ionic liquid electrochemical energy storage and conversion. This book also discusses about storage systems of electrochemical energy and lithium ion batteries, electrochemical energy conversion in lead-acid batteries, nanostructured materials for electrochemical energy conversion and storage devices, electrochemical energy conversion in solid oxide fuel cells and photo-electrochemical cell and its applications in optoelectronics.

SF05-487	Introduction to Electrical Measurements
	SachchidaNand Shukla/ 9781774073230/ Price:US$ 95.00

	Introduction to Electrical Measurements discusses the basic concept of the measurement systems along with the principles of electrical measurements. It includes the notion of instrumentation, electronic circuits, instrument transformers, AC bridges, and energy and power measurements. This book also discusses about the magnetic force and, analog and digital recorders. It provides the reader with the insights of different aspects of electrical measurements so as to understand notion of electrical measurements and learn about the transformers as well as recorders.

SF05-487	Introduction to Modern Instrumentation Methods and Techniques
	SachchidaNand Shukla/ 9781774073704/ Price:US$ 170.00

	Modern Instrumentation Methods and Techniques is a book which aims to discuss the instrumentation methods or techniques which are used for the purpose of analysis. This book includes the classification of instrumentation and fundamental function of the techniques. This book provides the readers with a detailed description about the mass spectrometry and the experimental methods which are used for optical spectroscopy. There are certain surface analysis techniques which are highlighted in this book. The insights of some topics have been provided to the readers in the second half of this book which includes nuclear magnetic resonance spectroscopy, UV/visible spectrophotometry and potentiometric analysis. The book is concluded with certain description about the infrared spectroscopy.

	Liquid Metal Alloys in Electronics
	David J. Fisher/ 9781644900680/ Price:US$ 125.00

	Liquid metal alloys are of rapidly increasing interest in electronics because they combine the high electrical conductivity of metals with the ease of manipulation and reconfiguration of liquids. The book focuses on such issues as self-assembled monolayers, energy-harvesting, reconfigurable and flexible antennae, sensors, conformable electronics, the creation of non-wetting super-hydrophobic or super-lyophobic surfaces, vacuum-assisted infiltration techniques, development of microfluidics, deformable electrodes and wearable electronics. The book references 270 original resources and includes their direct web link for in-depth reading.

	Advancing Silicon Carbide Electronics Technology II: Core Technologies of Silicon Carbide Device Processing
	Konstantinos Zekentes/ 9781644900666/ Price:US$ 125.00

	The book presents an in-depth review and analysis of Silicon Carbide device processing. The main topics are: (1) Silicon Carbide Discovery, Properties and Technology, (2) Processing and Application of Dielectrics in Silicon Carbide Devices, (3) Doping by Ion Implantation, (4) Plasma Etching and (5) Fabrication of Silicon Carbide Nanostructures and Related Devices.

	Additive Manufacturing of Metals
	David. J. Fisher/ 9781644900628/ Price:US$ 125.00

	Additive manufacturing of metals is an increasingly important process for producing or repairing structural components in the aerospace, medical and dental industries. The book reviews the various techniques that are currently in use and describes the many possible applications. The review is based on 350 original resources and includes their direct web link for in-depth reading.

	Neutron Radiography: WCNR-11
	Ulf Garbe/ 9781644900567/ Price:US$ 125.00

	Neutron radiography represents a powerful non-destructive testing technique that is still very much in development. The book reveals the amazing diversity of scientific and industrial applications of this technique, the advancements of the state-of-art neutron facilities, the latest method developments, and the expected future of neutron imaging.

	The Design of High Performance Mechatronics: High-Tech Functionality by Multidisciplinary System Integration
	Munnig Schmidt, R./ 9781643680507/ Price:EUR 135.00

	Since they entered our world around the middle of the 20th century, the application of mechatronics has enhanced our lives with functionality based on the integration of electronics, control systems and electric drives. This book deals with the special class of mechatronics that has enabled the exceptional levels of accuracy and speed of high-tech equipment applied in the semiconductor industry, realising the continuous shrink in detailing of micro-electronics and MEMS. As well as the more frequently presented standard subjects of dynamics, motion control, electronics and electromechanics, this book includes an overview of systems engineering, optics and precision measurement systems, in an attempt to establish a connection between these fields under one umbrella.

	Electromagnetic Non-Destructive Evaluation (XXIII)
	Tian, G.Y./ 9781643681184/ Price:EUR 113.00

	Electromagnetic Non-destructive Evaluation (ENDE) is an invaluable, non-invasive diagnostic tool for the inspection, testing, evaluation and characterization of materials and structures. It has now become indispensible in a number of diverse fields ranging from biomedics to many branches of industry and engineering. This book presents the proceedings of the 24th International Workshop on Electromagnetic Nondestructive Evaluation, held in Chengdu, China from 11 - 14 September 2019. The 38 peer-reviewed and extended contributions included here were selected from 45 original submissions, and are divided into 7 sections: eddy current testing and evaluation; advanced sensors; analytical and numerical modeling; material characterization; inverse problem and signal processing; artificial intelligence in ENDE; and industrial applications of ENDE. The papers cover recent studies concerning the progress and application of electromagnetic (EM) fields in the non-destructive examination of materials and structures, and topics covered include evaluations at a micro-structural level, such as correlating the magnetic properties of a material with its grain structure, and a macroscopic level, such as techniques and applications for EM NDT&E. Recent developments and emerging materials such as advanced EM sensors, multi-physics NDT&E, intelligent data management and maintaining the integrity of structures are also explored.

VF05-91	Contemporary Developments in High-Frequency Photonic Devices
	Siddhartha Bhattacharyya/ 9781522585312/ Price:US$ 225.00

	Microwave photonics and information optics provide high bandwidth and precision along with ultrafast speed at a low cost. In order to reduce noise at the communication trans-receivers, scattering in the devices needs to be decreased, which can be achieved by replacing optoelectronic devices with photonic devices because in the latter only photons propagate electromagnetic waves. Contemporary Developments in High-Frequency Photonic Devices is a crucial research book that examines high-frequency photonics and their applications in communication engineering. Featuring coverage on a wide range of topics such as metamaterials, optoelectronic devices, and plasmonics, this book is excellent for students, researchers, engineers, and professionals. Topics Covered The many academic areas covered in this publication include, but are not limited to: ‧Design Methodology ‧Electromagnets ‧Information Optics ‧Metamaterials ‧Microwave Photonics ‧Optical Logic Gate ‧Optoelectronic Device ‧Plasmonic Sensor ‧Plasmonics ‧Silicon Photonics

VF05-89	Handbook of Research on Smart Power System Operation and Control
	Hassan Haes Alhelou/ 9781522580300/ Price:US$ 265.00

	Because society depends greatly on electric energy, power system control and protection focuses on ensuring a secure and reliable supply of power. To operate the electric systems in safe mode, the power system component should be equipped with intelligent controllers. The Handbook of Research on Smart Power System Operation and Control is a collection of innovative research on the theoretical and practical developments in smart power system operation and control that takes into account both smart grid and micro-grid systems. While highlighting topics including cybersecurity, smart grid, and wide area monitoring, this book is ideally designed for researchers, students, and industry professionals. Topics Covered The many academic areas covered in this publication include, but are not limited to: ‧Cybersecurity ‧Electric Vehicle ‧Intelligent Control Applications ‧Micro-Grid ‧Physics ‧Power Systems ‧Smart Electric Drive ‧Smart Grid ‧System Protection ‧Voltage Control ‧Wide Area Monitoring

VF05-88	Emerging Innovations in Microwave and Antenna Engineering
	Jamal Zbitou/ 9781522575399/ Price:US$ 245.00

	Continuing advancements in electronics creates the possibility of communicating with more people at greater distances. Such an evolution calls for more efficient techniques and designs in radio communications. Emerging Innovations in Microwave and Antenna Engineering provides innovative insights into theoretical studies on propagation and microwave design of passive and active devices. The content within this publication is separated into three sections: the design of antennas, the design of the antennas for the RFID system, and the design of a new structure of microwave amplifier. Highlighting topics including additive manufacturing technology, design application, and performance characteristics, it is designed for engineers, electricians, researchers, students, and professionals, and covers topics centered on modern antenna and microwave circuits design and theory. Topics Covered The many academic areas covered in this publication include, but are not limited to: ‧Additive Manufacturing Technology ‧Applications for RFID ‧Complementary Split Ring Resonator ‧Design Application ‧Microwave Power Amplifier ‧Performance Characteristics ‧Printed Antennas ‧RF Active Circuits ‧RFID System ‧Ultra-Wideband

VF05-87	Emerging Capabilities and Applications of Wireless Power Transfer
	Alicia Trivino-Cabrera/ 9781522558705/ Price:US$ 195.00

	Technologies that enable powering a device without the need for being connected with a cable to the grid are gaining attention in recent years due to the advantages that they provide. They are a commodity to users and provide additional functionalities that promote autonomy among the devices. Emerging Capabilities and Applications of Wireless Power Transfer is an essential reference source that analyzes the different applications of wireless power transfer technologies and how the technologies are adapted to fulfill the electrical, magnetic, and design-based requirements of different applications. Featuring research on topics such as transfer technologies, circuital analysis, and inductive power transfer, this book is a vital resource for academicians, electrical engineers, scientists, researchers, and industry professionals seeking coverage on device power and creating autonomy through alternative power options for devices. Topics Covered The many academic areas covered in this publication include, but are not limited to: ‧Circuital Analysis ‧Couple Coils Model ‧Inductive Power Transfer ‧Magnetic Resonance Technology ‧Smart Cities ‧Transfer Technologies ‧Voltage-Controlled Capacitor

VF05-86	Advanced Condition Monitoring and Fault Diagnosis of Electric Machines
	Muhammad Irfan/ 9781522569893/ Price:US$ 225.00

	The reliability of induction motors is a major requirement in many industrial applications. It is especially important where an unexpected breakdown might result in the interruption of critical services such as military operations, transportation, aviation, and medical applications. Advanced Condition Monitoring and Fault Diagnosis of Electric Machines is a collection of innovative research on various issues related to machinery condition monitoring, signal processing and conditioning, instrumentation and measurements, and new trends in condition monitoring. It also pays special attention to the fault identification process. While highlighting topics including spectral analysis, electrical engineering, and bearing faults, this book is an ideal reference source for electrical engineers, mechanical engineers, researchers, and graduate-level students seeking current research on various methods of maintaining machinery. Topics Covered The many academic areas covered in this publication include, but are not limited to: ‧Artificial Intelligence ‧Bearing Faults ‧Electrical Engineering ‧Fault Identification ‧Feature Extraction ‧Generator Faults ‧Induction Motor ‧Motor Faults ‧Spectral Analysis ‧Vibration Monitoring

VF05-85	Optimal Power Flow Using Evolutionary Algorithms
	Provas Kumar Roy/ 9781522569718/ Price:US$ 195.00

	In today’s society, modern power grids are driven closer to transfer capacities due to increased consumption and power transfers, endangering the security of the systems. Providing methods in controlling variables to minimize costs, transmission loss, and voltage deviation of power system operation yields valuable economic information and insight into power flow. Optimal Power Flow Using Evolutionary Algorithms provides emerging research exploring the theoretical and practical aspects of optimizing power system operation through advanced electronic power devices. Featuring coverage on a broad range of topics such as hybridization algorithm, power system modeling, and transmission systems, this book is ideally designed for engineers, power system developers, academicians, and researchers seeking current research on emerging techniques in achieving quality power under normal operating conditions. Topics Covered The many academic areas covered in this publication include, but are not limited to: ‧Differential Evolution ‧Economic Load Dispatch ‧Hybridization Algorithm ‧Learning-Based Optimization ‧Mathematical Problem Formulation ‧Opposition-Based Learning ‧Power System Modeling ‧Simulation ‧Static Models ‧Transmission Systems

VF05-84	Sensing Techniques for Next Generation Cognitive Radio Networks
	Ashish Bagwari/ 9781522553540/ Price:US$ 215.00

	The inadequate use of wireless spectrum resources has recently motivated researchers and practitioners to look for new ways to improve resource efficiency. As a result, new cognitive radio technologies have been proposed as an effective solution. Sensing Techniques for Next Generation Cognitive Radio Networks is a pivotal reference source that provides vital research on the application of spectrum sensing techniques. While highlighting topics such as radio identification, compressive sensing, and wavelet transform, this publication explores the standards and the methods of cognitive radio network architecture. This book is ideally designed for IT and network engineers, practitioners, and researchers seeking current research on radio scene analysis for cognitive radios and networks. Topics Covered The many academic areas covered in this publication include, but are not limited to: ‧Coherence Bandwidth ‧Compressive Sensing ‧Cross-Correlation ‧Energy Detection ‧Radio Identification ‧Spectrum Accuracy ‧Spectrum Sensing ‧Wavelet Transform

VF05-83	Optoelectronics in Machine Vision-Based Theories and Applications
	Moises Rivas-Lopez/ 9781522557517/ Price:US$ 225.00

	Sensor technologies play a large part in modern life, as they are present in things like security systems, digital cameras, smartphones, and motion sensors. While these devices are always evolving, research is being done to further develop this technology to help detect and analyze threats, perform in-depth inspections, and perform tracking services. Optoelectronics in Machine Vision-Based Theories and Applications provides innovative insights on theories and applications of optoelectronics in machine vision-based systems. It also covers topics such as applications of unmanned aerial vehicle, autonomous and mobile robots, medical scanning, industrial applications, agriculture, and structural health monitoring. This publication is a vital reference source for engineers, technology developers, academicians, researchers, and advanced-level students seeking emerging research on sensor technologies and machine vision. Topics Covered The many academic areas covered in this publication include, but are not limited to: ‧Agent Logic Programming ‧Complementary Metal Oxide Semiconductor Image Sensor ‧Computer Vision Technology ‧Geodesic Photogrammetry System ‧Object-Oriented Logic Programming ‧Optical Detectors ‧Optical Scanning System ‧Stereophotogrammetry

VF05-68	Encyclopedia of Image Processing
	Phillip A. Laplante/ 9781482244908/ Price:GBP 875.00

	The Encyclopedia of Image Processing presents a vast collection of well-written articles covering image processing fundamentals (e.g. color theory, fuzzy sets, cryptography) and applications (e.g. geographic information systems, traffic analysis, forgery detection). Image processing advances have enabled many applications in healthcare, avionics, robotics, natural resource discovery, and defense, which makes this text a key asset for both academic and industrial libraries and applied scientists and engineers working in any field that utilizes image processing. Written by experts from both academia and industry, it is structured using the ACM Computing Classification System (CCS) first published in 1988, but most recently updated in 2012. Table of Contents General and Reference. Hardware. Computer Systems. Organization. Networks. Software and Its Engineering. Theory of Computation. Mathematics of Computing. Information Systems. Security and Privacy. Human-Centered Computing. Computing Methodologies. Applied Computing. Social and Professional Topics. Proper Nouns: People, Technologies and Companies.

SF05-483	Efficient Utilization of Energy
	R.K. Singal/ 9781781831199/ Price:GBP 35.00

	The book ‘Efficient Utilization of Energy’ has been prepared by stitching the research findings with practical data and information obtained from live projects. The book has been arranged to give a continuity to the text and to sustain the interest of the reader throughout. The book has been designed for the reference of practising engineers and policy makers working in various industries, power plants, government departments and non-government organizations. The book can also be adopted as a textbook for undergraduate and postgraduate courses in technical institutions. The book can be used by the students of Mechanical, Electrical and other branches of engineering specializing in energy technology and power engineering. The book has been divided into 14 chapters and covers various aspects of energy efficiency such as energy conservation, management, energy audit and energy consumption by different sectors.

SF05-480	Quantum optics: applications in research, quantum computing, and quantum communication
	Klaus Petritsch/ 9781773615455/ Price:US$ 170.00

	Quantum Optics: Applications in Research, Quantum Computing, and Quantum Communication examines various aspects of quantum optics with an illustrated research on quantum computing and communication. It includes the meaning of Spatiotemporal Optical Vortices, Continuous-Wave Single-Photon Transistor and a detailed information on photonic quantum repeaters. Provide the reader with the insights into the development of quantum research and applications required for quantum communication.

SF05-480	Solid State Electrolytes: Fundamentals and Applications
	Stefano Spezia/ 9781773615189/ Price:US$ 170.00

	Solid State Electrolytes: Fundamentals and Applications examines various aspects of solid state electrolytes including a description on the origin of fast ion diffusion in super-ionic conductors. It includes section dedicated to materials and applications, describing about ionic liquid-based thermoplastic solid electrolytes processed by solvent-free procedures and high-performance solid polymer electrolytes for rechargeable batteries. Provides the reader with the insights into the Newman’s theory for solid electrolytes and other application involved under Solid State Electrolytes.

SF05-480	Illustrated Handbook of Power System Engineering
	/ 9781680949957/ Price:US$ 180.00

	This book presents comprehensive technical information on power system engineering, covering the fundamental theory of power systems and their components, and the related analytical approaches. This book is intended for engineers and managers in the electricity supply industry, advanced students of electrical engineering, and workers in other industries with interest in resource allocation problems.

SF05-480	Illustrated Handbook of Electronic Amplifiers and Circuit Design
	/ 9781680944204/ Price:US$ 180.00

	Describes amplifier types, how they work, their properties, advantages and disadvantages, and applications. This book covers the fundamental aspects of fiber lasers and fiber amplifiers, and includes a wide range of material from laser physics fundamentals to state-of-the-art topics, as well as industrial applications in the rapidly growing field.

SF05-480	Advanced Concepts for Solar Cells
	P. Perez Rodriguez/ 9781773615639/ Price:US$ 170.00

	This book provides a comprehensive introduction to the physics of the photovoltaic cell. The book is designed as an overview for those in the fields of optics and optical engineering, as well as those interested in energy policy, economics and photo-to-electric energy conversion. This book is intended for upper-level graduate students who have a reasonably good understanding of solid state physics and for scientists and engineers involved in research and development of solar cells.

SF05-480	Photon-Atom Processes: Quantum Field Theory of Electrodynamics
	Stefano Spezia/ 9781773615196/ Price:US$ 170.00

	Photon-Atom Processes Quantum Field Theory of Electrodynamics investigates various aspects of electrodynamics and various models of Quantized EM-Field. It includes five different sections where section 1 and 2 talks about quantum electrodynamics and scattering processes, and section 3 and 4 highlights Fermion and Boson Propagators and QED Processes. Section 5 has been dedicated to Feynman diagrams and Higher-Order Interactions in QED of Strong Fields. Provide the reader with the insights into the development of quantum electrodynamics, so as to understand various physical processes associated with photon-atom interactions.

SF05-479	Power Electronics in Motor Drives: Principles, Application and Design
	L N Sebastian/ 9781682515273/ Price:US$ 155.00

	High-speed motors and drives can lead to a high power density and compact design, which are beneficial to a wide range of applications, including aerospace, transportation, and hand-held tools. This book provides an overview of state-of-the-art technologies and anticipated developments in the area of power electronic drives, controls, and electric generators for large multi-megawatt wind turbine systems. The book is aimed at readers from a range of disciplines, introductory material on motors and power electronics as well trends and development are also provided.

SF05-479	Power Electronics: Components, Circuits and Applications
	Yuanyuan Chan/ 9781682515280/ Price:US$ 150.00

	Applications of power electronics include industrial uses, commercial uses, residential purposes, electric vehicles, aerospace and space technologies. Covering state of the art information concerned with detailed analysis and design of converters, inverters and power control circuits using solid-state devices, this book will appeal to power electronic circuit designers, researchers, and material science engineers involved with power electronic components. The book concerns the important considerations necessary in the choice of the optimum magnetic component for power electronic applications.

SF05-479	Power Plant Life Management and Longer-term Operation
	Derrik Luis/ 9781682515594/ Price:US$ 150.00

	Energy security is the major concern of today’s world. Improving efficiency of the energy systems is an essential option for the security of future energy. This book covers statistics and current trends relating to the extended, longer-term operation of power plants, including economic and environmental benefits and challenges associated with nuclear power plant life management, together with the fundamental degradation mechanisms that affect conventional power plant systems and components. The book will be of interest for power plant operators, industrial engineers and metallurgists, and researchers interested in this important field.

SF05-479	Operational Amplifiers
	John Dann/ 9781682515051/ Price:US$ 155.00

	Operational Amplifiers (Op-amps) are among the most widely used electronic devices today, being used in a vast array of consumer, industrial, and scientific devices. This book gives comprehensive design and characteristics of the gain of the different operational amplifier circuits available. This book is intended for practicing technicians, technologists, engineers, and beginners in the electronics industry.

SF05-479	Advantage and Application of High solid and Multi-phase Bioprocess Engineering
	Preethi Kartan/ 9781773615080/ Price:US$ 170.00

	Advantage and Application of High solid and Multi-phase Bioprocess Engineering starts discussion from very beginning and extends the discussions to a greater detail making this piece of work suitable for beginners as well as experts in this field. Multiple methods like hydrolysis, Laboratory-scale method for enzymatic saccharification, model-based optimization, a statistical approach are described in a structured manner. In later part of the text, solid state fermentation has been explained considering Solid fermentation of wheat bran for hydrolytic enzymes production and cellulase production. Also, scale up of Polygalacturonase Production by Solid State Fermentation Process along with considering it as a Novel Paradigm for Organic Waste Valorization are discussed.

SF05-479	Basic Quantum Mechanics for Electrical Engineering
	Stefano Spezia/ 9781773615202/ Price:US$ 170.00

	Basic Quantum Mechanics for Electrical Engineering examines the basics of Quantum mechanics and a must have for Electrical Engineering. Readers are provided with detailed information on basic quantum mechanics specifically focused on Electrical engineering.

SF05-479	Control Methods for Electrical Machines
	John K Mladinic/ 9781682515334/ Price:US$ 155.00

	Motor control systems make use of a wide variety of control devices. The motor control devices range from simple pushbutton switches to more complex solid-state sensors. Examining existing and emerging electrical drive technologies, this book presents various computationally efficient component- and system-level design optimization methods for advanced electrical machines and drive systems. Illustrating modeling techniques and software simulation of the switched reluctance machine (SRM) machine models with controllers for efficient operation; the book covers an exhaustive state-of the art review valuable for students and researchers.

SF05-479	Electric Power Systems: Modelling and Control Applications
	Jinglin Gai/ 9781682515242/ Price:US$ 150.00

	This book presents perspectives of electric power system analysis, operation and control. Models of power system components such as transmission lines, transformers, static loads and synchronous generators are described in power system analysis. This book will be of interest for those involved in the research and those involved in the practical applications of new ideas and developments and a comprehensive reference source for all involved in the power industry.

SF05-479	Fluid Power Systems: Modelling and Diagnostic Techniques
	Abigail Lopez/ 9781682515488/ Price:US$ 150.00

	Today fluid power is used extensively in practically every branch of industry including mobile construction and aerospace equipment to powering industrial machinery, and offers several advantages over other types of motive force. This book shows practicing fluid power engineers all they need to know about keeping track of the health of their equipment, processes and products. Modeling techniques based on physical laws and measured performance characteristics will be applied to design and analyze component and system performance; a great interest and value to all practitioners and researchers in the fluid power technology.

SF05-479	Intelligent Control: Power Electronic Systems
	K D Silva/ 9781682515266/ Price:US$ 155.00

	Advent of advanced power electronic converters and powerful digital signal processors, however, has made possible the development of high performance, adjustable speed AC motor drives. As you know, power electronics and motor drive technology is very complex and multidisciplinary, and it has gone through a dynamic evolution in recent years. Understanding of the basic theoretical and practical underpinnings of advanced control to illustrate their use in power converters, this book presents the application of different predictive control methods to power electronics and drives.

SF05-479	Core Concepts in Engineering: Electrical Engineering (Book with DVD)
	/ 9781984620460/ Price:US$ 75.00

	The book presents a detailed exposition of the basic facets of electrical and electronics engineering. This book is intended to enlighten and refresh knowledge to help educate engineering students.

SF05-479	Core Concepts in Engineering: Electronics Engineering (Book with DVD)
	/ 9781984620477/ Price:US$ 75.00

	Covers the study of electronic components, circuits, transmitter, receiver, integrated circuits. Covers both the theory of electrical and electronics engineering as well as practical applications for industry.

SF05-479	Basics of Electronics & Microprocessor (Book with DVD)
	/ 9781984624130/ Price:US$ 90.00

	The second edition of this book covers basic logic gates used in this emerging field. This book covers basic logic gates used to perform arithmetic operations, and proceeds up through sequential logic and memory circuits used to interface to modern PCs. The edition is revised and updated with the latest information and new chapters are added. This updated edition offers students real advice in navigating the ever-changing academic landscape.

SF05-479	Innovative Instrument Design and Applications
	Lazo M. Manojlovic/ 9781773613345/ Price:US$ 170.00

	From underlying concepts to practical applications, this book outlines all the necessary information to plan, design, and implements innovative instrumentations effectively and efficiently. This text integrates engineering principles with real applications from a systems perspective, providing a framework for developing electronic instrumentation, from hand-held devices to consoles.

	Advances in Manufacturing Technology XXXIII Proceedings of the 17th International Conference on Manufacturing Research, incorporating the 34th National Conference on Manufacturing Research
	Jin, Y., Price, M./ 9781643680088/ Price:EUR 140.00

	This book presents the proceedings of the 17th International Conference on Manufacturing Research (ICMR 2019), held in Belfast, UK, on 10 – 12 September 2019. ICMR has been the UK’s main manufacturing research conference for 34 years and an international conference since 2003. It brings together researchers, academics and industrialists to share their vision, knowledge and experience and discuss emerging trends and new challenges in manufacturing research. The conference theme of ICMR2019 was smart manufacturing, and the book includes the 82 papers presented at the conference (representing an acceptance rate of 69%). These have been divided into 13 parts, which cover topics ranging from robot automation and machining processes, additive manufacturing, composite manufacturing, design methods, to information management, quality control, production optimization and product lifecycle management.

	Illustrated Handbook of Optoelectronics
	/ 9781984625779/ Price:US$ 180.00

	Presents clearly the trend in future optoelectronic devices. Provides a practical engineering introduction to optoelectronic LEDs and silicon sensor technology for the infrared, visible, and ultraviolet portion of the electromagnetic spectrum. Details of design, material selection and working processes as well as the limitations of various optoelectronic devices and fiber-optic sensor systems.

	Senior Leadership Roundtable on Military and Defence Aspects of Border Security in South East Europe
	Lochard, I.V./ 9781614999072/ Price:EUR 108.00

	This book presents papers delivered at the NATO Science for Peace and Security (SPS) event: “Senior Leadership Roundtable on Military and Defense Aspects of Border Security in South East Europe”, held in Berovo, the Former Yugoslav Republic of Macedonia* from 23-30 September 2017. The aim of this special SPS grant was to maximize opportunities for extensive dialogue and collaboration between senior regional members, and the almost 70 distinguished academic and legal experts, as well as current or former senior-level practitioners from various governments, NATO bodies, and international organization that participated. It was the first SPS event of its kind in SEE as well as the first NATO SPS grant to be co-executed by the U.S. Department of Defense via the U.S. National Defense University. Other co-organizers were the C4I and Cyber Center of Excellence at George Mason University and PfP partner institution, the General Mihailo Apostolski Military Academy – Skopje, Associate Member of the University of Goce Del?ev – Stip. The book is divided into five parts: global trends, defining the problem, policy and academic solutions, national and regional case studies, and technological solutions. It will prove an invaluable source of reference for all those with an interest in the SEE region as well as cross-border hybrid threats, in general.

VF05-82	Recent Advancements in Airborne Radar Signal Processing: Emerging Research and Opportunities
	Amir Almslmany/ 9781522554363/ Price:US$ 145.00

	As computer and information systems technology advances, industries such as aviation stand to benefit from the overwhelming new advances in hardware, software, and best practices. Recent Advancements in Airborne Radar Signal Processing: Emerging Research and Opportunities is a critical scholarly resource exploring an airborne radar system that will help to improve the function of airborne radar and self-deception spoofing jammer sources. Featuring coverage on a broad range of topics, such as doppler straddling loss, spoofing systems, and radar platform modeling, this book is geared towards academicians, researchers, and students seeking current research on radar signal processing in the field of aviation. Topics Covered The many academic areas covered in this publication include, but are not limited to: ‧Automatic Gain Control ‧Doppler Straddling Loss ‧Radar Platform Modeling ‧Radio Detection ‧Self-Deception Jammer ‧Spoofing Systems ‧Terrain Mapping

VF05-81	Handbook of Research on Power and Energy System Optimization
	Pawan Kumar/ 9781522539353/ Price:US$ 325.00

	In recent years, the development of advanced structures for providing sustainable energy has been a topic at the forefront of public and political conversation. Many are looking for advancements on pre-existing sources and new and viable energy options to maintain a modern lifestyle. The Handbook of Research on Power and Energy System Optimization is a critical scholarly resource that examines the usage of energy in relation to the perceived standard of living within a country and explores the importance of energy structure augmentation. Featuring coverage on a wide range of topics including energy management, micro-grid, and distribution generation, this publication is targeted towards researchers, academicians, and students seeking relevant research on the augmentation of current energy structures to support existing standards of living. Topics Covered The many academic areas covered in this publication include, but are not limited to: ‧Distribution Generation ‧Energy Management ‧Energy Trading ‧Loads Modeling ‧Micro-Grid ‧Smart Cities ‧Smart Distribution Systems

VF05-80	Electronic Nose Technologies and Advances in Machine Olfaction
	Yousif Albastaki/ 9781522538622/ Price:US$ 205.00

	The design and study of materials is a pivotal component to new discoveries in the various fields of science and technology. By better understanding the components and structures of materials, researchers can increase its applications across different industries. Electronic Nose Technologies and Advances in Machine Olfaction is an academic scholarly resource that examines the emerging applications of odor-sensing devices as well as a better understanding of the designing process with the aid of neural networks and various other technologies. Featuring coverage on a broad range of topics including food spoilage detection, chemical sensing, and olfactometer, this book is a vital resource for engineers, academicians, researchers, students, and practitioners seeking current research on the advancements in applications of odor-sensing devices. Topics Covered The many academic areas covered in this publication include, but are not limited to: ‧Artificial Odor Classification System ‧Chemical Sensing ‧Drift Compensation Methods ‧Explosive Detection ‧Food Spoilage Detection ‧Odor Sensing ‧Olfactometer

VF05-79	Advances in System Dynamics and Control
	Ahmad Taher Azar/ 9781522540779/ Price:US$ 235.00

	Complex systems are pervasive in many areas of science. With the increasing requirement for high levels of system performance, complex systems has become an important area of research due to its role in many industries. Advances in System Dynamics and Control provides emerging research on the applications in the field of control and analysis for complex systems, with a special emphasis on how to solve various control design and observer design problems, nonlinear systems, interconnected systems, and singular systems. Featuring coverage on a broad range of topics, such as adaptive control, artificial neural network, and synchronization, this book is an important resource for engineers, professionals, and researchers interested in applying new computational and mathematical tools for solving the complicated problems of mathematical modeling, simulation, and control. Topics Covered The many academic areas covered in this publication include, but are not limited to: ‧Adaptive Control ‧Artificial Neural Network ‧Chaotic Systems ‧Control Engineering ‧Electronic Circuit ‧Mathematical Modeling ‧Synchronization

VF05-78	Electromagnetic Compatibility for Space Systems Design
	Nikolopoulos, Christos D./ 9781522554158/ Price:US$ 225.00

	In the aerospace industry, avoiding operating issues, especially in regard to space missions and satellite structures, is crucial. The vast majority of these issues can be traced to disturbances in the electromagnetic fields used. Electromagnetic Compatibility for Space Systems Design is a critical scholarly resource that examines the applications of electromagnetic compatibility and electromagnetic interference in the space industry. Featuring coverage on a wide range of topics, such as magnetometers, electromagnetic environmental effects, and electromagnetic shielding, this book is geared toward managers, engineers, and researchers seeking current research on the applications of electromagnetic technologies in the aerospace field. Topics Covered The many academic areas covered in this publication include, but are not limited to: ‧Electromagnetic Compatibility ‧Electromagnetic Environmental Effect ‧Electromagnetic Shielding ‧Magnetic Dipole Modeling ‧Magnetometers ‧Noise Tolerance ‧Transient Electromagnetic Phenomena

VF05-77	EHT Transmission Performance Evaluation: Emerging Research and Opportunities
	Srinivas, K./ 9781522549413/ Price:US$ 145.00

	Electricity has become a basic requirement in today’s world. Interruption free electrical energy and availability of surplus power are entwined in improving consumers quality of life. EHT Transmission Performance Evaluation: Emerging Research and Opportunities provides emerging research on reliability aspects of components, transmission lines, and substation designs. While highlighting power system adequacy and security, readers will also see how those aspects need to be given first consideration when making continuous power available to consumers. This book is a vital resource for researchers, professionals, and academics seeking current research on EHT transmission performance. Topics Covered The many academic areas covered in this publication include, but are not limited to: ‧Back Propagation Algorithm ‧BUS Configurations ‧EHT Sub-Station Index ‧Load Forecasting ‧Matlab Tool Box ‧Probability Functions ‧System Adequacy

VF05-76	Design Parameters of Electrical Network Grounding Systems
	Gouda, Osama El-Sayed/ 9781522538530/ Price:US$ 235.00

	As the demand for efficient energy sources continues to grow around the globe, electrical systems are becoming more essential to meet these increased needs. As these systems are being utilized more frequently, it becomes imperative to find ways of optimizing their overall function. Design Parameters of Electrical Network Grounding Systems is a critical scholarly resource that examines safe grounding designs of electrical networks. Featuring coverage on a broad range of topics such as cathodic protection of grounding grids, grounding connections, and soil resistivity evaluation, this book is geared towards academicians, practitioners, and researchers seeking current research on electrical networks. Topics Covered The many academic areas covered in this publication include, but are not limited to: ‧Cathodic Protection of Grounding Grids ‧Design of Grounding System ‧Grounding Connections ‧Grounding System Installation ‧Grounding System Resistance ‧Soil Resistivity Evaluation ‧Step and Touch Voltages

VF05-75	Smart Grid Test Bed Using OPNET and Power Line Communication
	Huh, Jun-Ho/ 9781522527763/ Price:US$ 225.00

	Smart technology has significantly enhanced the efficient management of electric power supply systems. Despite the benefits of these advances, the complexity of such systems has proven to be difficult for testing purposes. Smart Grid Test Bed Using OPNET and Power Line Communication presents an innovative perspective on the design, development, and implementation of an expandable test bed for smart grid applications. Highlighting pertinent topics such as intrusion detection, user interface, and performance evaluation, this book is an ideal reference source for researchers, academics, engineers, students, and professionals interested in the latest advancements for smart grid technologies. Topics Covered ‧Communication Infrastructure ‧Electric Power Monitoring ‧Intrusion Detection ‧Mobile WiMAX Architecture ‧Performance Evaluation ‧User Interface ‧Zigbee Architecture

VF05-74-4	Power System Protective Relaying
	Das, J. C./ 9781498745505/ Price:GBP 145.00

	This book focuses on protective relaying, which is an indispensable part of electrical power systems. The recent advancements in protective relaying are being dictated by MMPRs (microprocessor-based multifunction relays). The text covers smart grids, integration of wind and solar generation, microgrids, and MMPRs as the driving aspects of innovations in protective relaying. Topics such as cybersecurity and instrument transformers are also explored. Many case studies and practical examples are included to emphasize real-world applications.

VF05-74-3	Harmonic Generation Effects Propagation & Control
	Das, J. C./ 9781498745468/ Price:GBP 145.00

	This book provides coverage of generation, effects, and control of harmonics, including interharmonics and measurements, measurements and estimation of harmonics, harmonic resonance and limitations, according to standards. It serves as a practical guide to undergraduate and graduate students, as well as practicing engineers on harmonics. The concepts of modeling filter designs and harmonic penetrations (propagations) in industrial systems, distribution, and transmission systems are amply covered with the application of SVCs and FACTS controllers. Harmonic analysis in wind and solar generating plants are also discussed. Many case studies and practical examples are included to emphasize real-world applications. The appendices are devoted to Fourier analysis, pertinent to harmonic analysis, and solutions to the problems included throughout the book.

VF05-74-2	Load Flow Optimization and Optimal Power Flow
	Das, J. C./ 9781498745444/ Price:GBP 150.00

	This book discusses the major aspects of load flow, optimization, optimal load flow, and culminates in modern heuristic optimization techniques and evolutionary programming. In the deregulated environment, the economic provision of electrical power to consumers requires knowledge of maintaining a certain power quality and load flow. Many case studies and practical examples are included to emphasize real-world applications. The problems at the end of each chapter can be solved by hand calculations without having to use computer software. The appendices are devoted to calculations of line and cable constants, and solutions to the problems are included throughout the book.

VF05-74-1	Short-Circuits in AC and DC Systems: ANSI, IEEE, and IEC Standards
	Das, J. C./ 9781498745413/ Price:GBP 145.00

	This book provides an understanding of the nature of short-circuit currents, current interruption theories, circuit breaker types, calculations according to ANSI/IEEE and IEC standards, theoretical and practical basis of short-circuit current sources, and the rating structure of switching devices. The book aims to explain the nature of short-circuit currents, the symmetrical components for unsymmetrical faults, and matrix methods of solutions, which are invariably used on digital computers. It includes innovations, worked examples, case studies, and solved problems.

SF05-480	Formal Ontology in Information Systems: Proceedings of the 10th International Conference (FOIS 2018)
	Stefano Borgo/ 9781614999096/ Price:EUR 108.00

	FOIS is the flagship conference of the International Association for Ontology and its Applications (IAOA). Its interdisciplinary research focus lies at the intersection of philosophical ontology, linguistics, logic, cognitive science, and computer science, as well as in the applications of ontological analysis to conceptual modeling, knowledge engineering, knowledge management, information-systems development, library and information science, scientific research, and semantic technologies in general. This volume presents the proceedings of FOIS 2018, held in Cape Town, South Africa, on 19–21 September 2018. It was the 10th edition and 20th anniversary of the conference series. The volume contains 19 papers grouped into 4 sections: Foundations (7 papers), Agents and Properties (4 papers), Methods and Tools (4 papers), and Applications (4 papers). Regarding the applications of ontologies, a broad spectrum of areas is covered, including in particular biology and medicine, IoT, engineering and linguistics.

SF05-476	Linear Integrated Circuits
	D. Roy Choudhury/ 9781781831007/ Price:GBP 35.00

	The book is designed primarily for courses in operational amplifiers and linear integrated circuits for Electrical, Electronics, Instrumentation, Computer Engineering and Applied Science students. The text has been written in a style to enable students to self study. Examples are provided throughout the book to help the students assimilate the material covered. The text is so designed that the teacher may hardly need to consult reference books. It offers fabrication technology for IC’s, wide array of op-amp 741 applications, 555 timer, 565 PLL, linear voltage regulator IC’s, 78/79XX, 723, AD/DA converters, active filters using 741, switched capacitor filters and OTAs in a comprehensive manner. In this new edition in multi-colour, many important topics have been added to make it more comprehensive and useful. The material has been re-organised more logically and a separate chapter on Operational Transconductance Amplifier (OTA) with more applications is the major highlight of this edition.

SF05-475	Electrical Power Transmission and Distribution
	K.L. Ratnakar/ 9781781831144/ Price:GBP 35.00

	This book presented by the author is so designed to meet the basic needs of students of universities and colleges. The subject matter has been presented logically using simple language to explain the fundamental concepts. The book consists of eight chapters namely: Typical Transmission and Distribution Schemes Over Head Transmission Lines Line Parameters Characteristics and Performance of Transmission Lines Insulators Under Ground Cables Corona Electric Distribution of Power. Each chapter has been dealt in the following way: Contents at the beginning of the chapter Illustrations including solved problems At the end of each chapter, important points to remember are given. The book will be useful as text /reference book and also will facilitate the students to prepare for regular examinations and also the competitive examinations.

SF05-470	Dye Sensitized Solar Cells: Basics to Applications.
	Kezia Sasitharan/ 9781773610924/ Price:US$ 165.00

	This book, a graduate level text that brings together the fundamentals of DSC, starts with a detailed explanation about the basics of solar cell technology and move on to overview some aspects of the historical background, present-scenario, currently popular applications and future prospects of dye sensitized solar cells. The structural aspects and working principle of this promising class of solar cells has been dealt in detail for providing a good understanding of the basics. Some novel schemes in preparation and assembly of dye sensitized solar cell (DSC) have been presented from recent literature reports.

SF05-470	Polymers for Electronics and Optoelectronics.
	Grace Marnecheck/ 9781773612386/ Price:US$ 165.00

	After World War II, great effort was exerted by scientists and manufacturers to replace metals with polymers used in many fields producing diodes, transistors, printed circuit boards and other important electronics and optoelectronics applications. This book consists of two parts; first part is a general overview on polymer structure, properties and forming. Second part will discuss special types of polymers used for electronics and optoelectronics applications.

SF05-470	Materials Science in Semiconductor Processing.
	P. Perez Rodriguez/ 9781773612393/ Price:US$ 165.00

	Drawing information on how processing methods are implemented in real day-to-day devices such as electronics or solar cells. In addition, environmental and safety issues are considered, including the fabrication process of the devices and the different chemicals that are used there, as well as the actual recycling of the components inside the device once this has been disposed of. The book also gives some economic perspective and industrial background on the industry, allowing for some concluding remarks and recommendations.

SF05-470	Commercial and Industrial Wiring. (With DVD)
	3G Editorial Board/ 9781680948417/ Price:US$ 130.00

	Covers updated topics specifically relating to the design and maintenance of commercial and industrial wiring systems. Provides readers with a unique approach to learning commercial and industrial wiring using highly-detailed, technically-accurate illustrations. Presents theory plus on-the-job applications for wiring used for all types of commercial and institutional electrical systems.

SF05-470	Digital Circuit & Logic Design. (With DVD)
	3G Editorial Board/ 9781680948424/ Price:US$ 130.00

	This updated edition covers all aspects of digital systems from the electronic gate circuits to the complex structure of microcomputer systems. Deals with simple coding techniques and the principles of error detection and correction. This text is intended for digital logic design, for electrical engineering, computer engineering and computer science programs, as well as for a number of other disciplines .

SF05-470	Micro Electro Mechanical Systems (MEMS). (With DVD)
	3G Editorial Board/ 9781680948455/ Price:US$ 85.00

	Microelectromechanical systems (MEMS) are a groundbreaking field that adapts for new uses a technology already optimized to accomplish a specific set of objectives. Focuses on the fundamentals of nano- and microengineering and nano- and microtechnology. Describes the principles of MEMS through an integrated approach and closed-form solutions to micromechanical problems, which have been recently developed by the author and go beyond what is available in other texts.

SF05-470	Microprocessors. (With DVD)
	3G Editorial Board/ 9781680948462/ Price:US$ 130.00

	Provides a solid foundation in the technology of microprocessors and microcontrollers, their principles and applications. This book introduces the workings of the microprocessor, its applications, and programming in assembler and high level languages such as C and Java. This updated edition is primarily designed for undergraduate students of this subject and will be very useful for self-study.

SF05-470	Introduction to Optical Fiber Technology. (With DVD)
	3G Editorial Board/ 9781680948493/ Price:US$ 130.00

	Comprehensive concepts about optical fibers: Their structure, their light-guiding mechanism, their material and manufacture, their use. Offers the fundamental principles for understanding and applying optical fiber technology to sophisticated modern telecommunication system. Covers latest improvements and advancement in optical fiber technology related to the next generation optical communication.

SF05-470	Theory, Practice and Techniques in Power Engineering.
	3G Editorial Board/ 9781680948554/ Price:US$ 75.00

	Demonstrates the application of software tools in solving a series of problems from the field of designing power system structures and systems. This text presents a succinct and rigorous exposition of the main fundamentals of electric power engineering. A valuable introduction to key concepts in electric power engineering for both entry-level and seasoned professionals.

SF05-470	Theory, Practice and Techniques in Electrical Engineering.
	3G Editorial Board/ 9781680948585/ Price:US$ 75.00

	Covers the basic measurement techniques, instruments, and methods used in everyday practice. Includes field theory and advanced computational electromagnetics; electrical machines and transformers; optimization and interactive design; electromagnetics in materials; coupled field and electromagnetic field. The book gives a comprehensive coverage of the subject, with numerous illustrations for easy understanding.

SF05-470	Theory, Practice and Techniques in Electronics Engineering.
	3G Editorial Board/ 9781680948615/ Price:US$ 75.00

	This book introduces students to all the basics of electronics. Covers nonlinear and active electrical components to design electronic circuits, devices, microprocessors, microcontrollers and other systems. Presents the coverage of the full spectrum of fundamental topics in each of the several major areas of electrical and electronics engineering.

SF05-470	Consumer Electronics: Advanced. (With DVD)
	3G Editorial Board/ 9781680949230/ Price:US$ 160.00

	Introduce the knowledge and skills for those studying and/or working in electrical/electronics sector to understand and take information so as to workplace requirements. The content has been revised and new topics are added in this edition. This book entails competencies that a person must possess to commission consumer electronic products and systems, train service technician and develop servicing system for consumer electronic products and systems.

SF05-470	Electrical Installation & Maintenance: Intermediate. (With DVD)
	3G Editorial Board/ 9781680949247/ Price:US$ 160.00

	This second edition is designed to prepare students with entry level knowledge and manipulative skills for employment in the electrical industry. Covers wide-ranging information to install and maintain electrical wiring, lighting and related equipment and systems in residential houses/buildings. This updated guide will be of valuable tool for students making career as building-wiring electrician, residential/commercial-wiring electrician, and maintenance electrician.

SF05-470	Plumbing: Intermediate. (With DVD)
	3G Editorial Board/ 9781680949308/ Price:US$ 160.00

	This revised edition will introduce the knowledge and skills for those studying and/or working in plumbing or construction industry. Deals with wide-ranging information in installing multiple units of plumbing system with multi-point hot- and cold-water lines for medium rise buildings. It also includes plumbing repair and maintenance work.

SF05-470	Illustrated Handbook of Electrical Engineering.
	3G Editorial Board/ 9781680949933/ Price:US$ 180.00

	Presents a detailed exposition of the basic facets of electrical and electronics engineering. The book contains a wealth of illustration that aids the students understanding of the subject matter. This book may be helpful for students of electronic departments of technical universities and for practicing engineers.

SF05-470	Illustrated Handbook of Solar Power Technologies
	3G Editorial Board/ 9781680949988/ Price:US$ 180.00

	Illustrating solar power technology provides a comprehensive review of this exciting technology, from the fundamental science to systems design, development and applications. Discusses everything you need to know about solar power systems and solar cell technologies in a student-friendly manner.

SF05-470	Illustrated Handbook of Robotics.
	3G Editorial Board/ 9781680944723/ Price:US$ 180.00

	Provides a state-of-the-art overview on the various aspects in the rapidly developing field of robotics. Covers a fair amount of kinematics and dynamics of the robots. It also covers the sensors and actuators used in robotics system. Suitable for use in senior undergraduate and graduate courses in automation and computer, electrical, electronic and mechanical engineering courses with strong robotics content.

SF05-470	Illustrated Handbook of Industrial Instrumentation & Control.
	3G Editorial Board/ 9781680944235/ Price:US$ 180.00

	Principles, design and applications of such state of the art instrumentation schemes form the subject matter of this book. Illustrates the working principles, advantages, disadvantages and applications of each instrument. Provides an in-depth view of the technologies that are implemented in most varieties of modern industrial control engineering.

SF05-470	Illustrated Handbook of NanoElectronics.
	3G Editorial Board/ 9781680944877/ Price:US$ 180.00

	This handbook brings together state-of-the-art information on important topics in the subject of nanoelectronics. Covers the synthesis, characterization, structure property relationship, performance, and applications of these materials. Introduces all progresses in nanoelectronics, this book will be a valuable tool to the students in solid state physics, materials science, electrical and electronic students.

SF05-470	3GE Collection on Engineering: Solar Cells: New Approaches.
	3G Editorial Board/ 9781680957990/ Price:US$ 160.00

	New methods and approaches have been presented to purify and to anneal the material into a form for maximum performance. This book consists chapters that are general in nature and not related specifically to the so-called photovoltaic generations, novel scientific ideas and technical solutions, which has not properly approved. Special consideration is given to solar cells as intellectual property. This volume addresses the main issue of going from science to technology, and that is the aim of this book.

SF05-470	Carbon Electronics.
	Nelson Bolivar/ 9781773610986/ Price:US$ 160.00



SF05-470	Latest Research in Photonics.
	W.S. Roland/ 9781682504246/ Price:US$ 150.00

	The further progress in photonics, as well as in many other technological fields is connected with application of new materials. This book aims to provide the research into the design, technology and applications of integrated photonic devices, circuits, and waveguides. It is a good contribution for providing the way for further innovations in photonic technology. The chapters are contributed by well-experienced researchers in their fields. Authoritative content covers advances in all areas of optics and photonics from fundamental science to engineering applications, including materials, devices, and systems. The state-of-the-art field of photonics has considerably fascinated the interest of many societies, professionals and researchers around the world.

SF05-470	Optics: Principles and Applications
	Anthony Miller/ 9781682504239/ Price:US$ 155.00

	The study of optics has huge applications to the technology on earth and is extremely helpful in many ways. Light plays a vital role in our daily lives and is an imperative cross-cutting discipline of science in the 21st century. This comprehensive compendium aims to present the challenging and innovating methods and techniques related to the development of optics materials, characterization and applications. It will be of great interest for engineers working on developing next generation optical components; scientists involved with research on fiber amplifiers and lasers; students and researchers working in the field of optics.

SF05-470	Methods and Techniques in Modern Instrumentation.
	K. Ronaldo/ 9781682513019/ Price:US$ 160.00

	This Book aims to provide contemporary advancements in instrumentation. The purpose of the work is to provide intensive information on methods of new instrumentation techniques that have been developed and improved in recent years. Its objective is to provide the analyst with a reference manual while providing students with a teaching tool that covers the basics of most instrumental techniques presently used in industry. This Book will appeal to students, practitioners, and academicians, providing comprehensive information and discuss various new issues and developments in different areas of instrumentation.

SF05-470	Trends and Issues in Signal and Information Processing.
	S.K. Smith/ 9781682512999/ Price:US$ 155.00

	The Signal and Information Processing area concerns the representation, processing, analysis, and communication of the information in all kinds of signals including audio, video, and biological or sensory data. This comprehensive book includes developing novel theoretical and practical approaches to signal modeling, detection/estimation, statistical learning, and the recognition, organization, and understanding of signal content. The book is intended to the latest advancements in signal and information processing.

SF05-470	Advances in Ultrasonics and Acoustics.
	Dan Cooper/ 9781682513187/ Price:US$ 150.00

	Ultrasonic waves proved to be an excellent method for determining the depth of water. Sound detection is critical in the development of many systems such as meters or other sensing systems.Acoustic evaluation of porous materials can take advantage of some very specific acoustic phenomena that occur only in fluid-saturated consolidated solids of continuously connected pore structure.This book presents a number of state-of-the-art applications of ultrasonic waves, developed by the main researchers in their scientific fields from all around the world. Readers will find this book a valuable source of information where authors describe their works in a clear way, basing them on relevant bibliographic references and actual challenges of their field of study.

SF05-470	Applications and Theoretical Studies of Semiconductor Processing.
	Paul K. Sung/ 9781682513286/ Price:US$ 150.00

	Semiconductor devices have demoralized materials, physics and imaginative applications to offspring new lifestyles. Semiconductor devices have changed the face of electronics today. The chapters of the Book provide a snapshot of current insights, new achievements, breakthroughs and future trends in such diverse fields as microelectronics, energy conversion and storage, communications, biotechnology, (photo) catalysis, nano- and thin-film technology, hybrid and composite materials, chemical processing, vapor-phase deposition, device fabrication, and modelling, which are the backbone of advanced semiconductor processing and applications.

SF05-470	Characterstics and Materials of Semiconductors.
	Iztok Marnik/ 9781682513279/ Price:US$ 150.00

	Semiconductor devices have become indispensable for generating electromagnetic radiation in every day applications. Visible and infrared diode lasers are at the core of information technology, and at the other end of the spectrum, microwave and radio frequency emitters enable wireless communications. This comprehensive guide brings together research studies and articles by providing detailed explanations of the electronic, vibrational, transport, and optical properties of semiconductors. This book will be of interest to students, researchers, as well as professionals in Electronics Engineering

SF05-470	Developments in Digital Signal Processing and Noise Reduction Techniques.
	Jheng Duan/ 9781682513293/ Price:US$ 150.00

	The theory and application of signal processing is concerned with the identification, modelling and utilization of patterns and structures in a signal process. This Book provides a lucid and designed presentation of the theory and applications of statistical signal processing and noise reduction approaches. Digital signal processing techniques are increasingly replacing conventional analog signal processing methods in many fields, such as speech analysis and processing, radar and sonar signal processing, biomedical signal analysis and processing, telecommunications, and geophysical signal processing.

SF05-470	Electrical Measurements and Measuring Instruments.
	Arthur Harris/ 9781682513828/ Price:US$ 155.00

	This work brings together explains the basic measurement techniques, instruments, and methods used in everyday practice. It aims at bridging traditional concepts with modern technologies of electrical and electronics measurements and instrumentation. Since the basic concepts cut across disciplines—such as electrical, mechanical, electronics, instrumentation and control engineering— this book presents a proper balance between theoretical and analytical approach, as well as practical illustrations along with computational approach for solving various kinds of numerical problems.

SF05-470	Electronic Communication Systems: Theory and Practices.
	John C. Clark/ 9781682513859/ Price:US$ 150.00

	The process of communication is inherent to all human life and includes verbal, nonverbal, print, and electronic processes. This inclusive guide provides electronics technologists with an extraordinarily complete, accurate, and timely introduction to all of the state-of-the-art technologies used in the communications field today. Comprehensive coverage includes traditional analog systems, as well as modern digital techniques. Extensive discussion of today’s modern wireless systems- including cellular, radio, paging systems, and wireless data networks- is also included. It is intended for use as a reference tool for students and researchers involved in the field of Communication Systems.

SF05-470	Electronic Instrumentation and Measurements.
	Alan Jones/ 9781682513866/ Price:US$ 150.00

	In the world of mechanical devices today, most measurements are made by electronic instrumentation, not the crude mechanical devices of the past. Most of these newer devices are actually a modern combination of a mechanical device and electronic sensing element. This collection is designed to introduce some of the more common basic instrumentation and its use. Electronic Instrumentation and Measurements is designed as a reference tool for students and practitioners involved in electrical, electronics, and instrumentation disciplines

SF05-470	Fundamentals and Applications of Lasers Ultrasonics.
	I. K. Lewis/ 9781682513194/ Price:US$ 150.00

	Laser ultrasonic techniques are only likely to find industrial application where they answer a need that cannot be met by conventional transducers. The book reviews acoustic-optics, various cousto-optic devices, and noninterferometric optical methods of measuring ultrasonic displacements. Conventional ultrasonic techniques have long been recognized for their usefulness in the nondestructive testing of materials and structures. Readers will find this book a valuable source of information where authors describe their works in a clear way, and actual challenges of their field of study.

SF05-470	Handbook of Electric Machines.
	Brian Robinson/ 9781682513842/ Price:US$ 155.00

	Electric machines have become so ubiquitous that they are virtually overlooked as an integral component of the entire electricity infrastructure. Developing ever more efficient electric machine technology and influencing their use are crucial to any global conservation, green energy, or alternative energy strategy. This comprehensive work brings to the fore, various types of electrical machines, their operations, and applications, as well as the method of determining their parameters. Various ways of protecting electric machines against overloads and mechanical faults are also highlighted.

SF05-470	Industrial Circuits and Automated Manufacturing.
	Brad Allen/ 9781682513897/ Price:US$ 150.00

	Due to the rapid advances in technology, all industrial processing systems, factories, machinery, test facilities, etc. turned from mechanization to automation. A mechanization system needs human intervention to operate the manual operated machinery. This book discusses the benefits and pitfalls associated with lean manufacturing management starting from the kernel idea that pleasing the customer should be at the root of all effort leading through the ravages of overzealous application of “lean to the max.”

SF05-470	Power Electronics Handbook.
	Bryan Green/ 9781682513873/ Price:US$ 150.00

	Power electronics is one of the contemporary subjects of electrical engineering which has seen a lot of advancements in recent times and has impacted human life in almost every sphere. This literature covers the basics of power electronics theory and components while emphasizing modern low-power components and applications. Trends and future prospects in utility applications of power electronics are presented. Some practical applications, which cover a wide range of power electronics equipment in power systems, are highlighted.

SF05-470	Solid-State Electronics: Theory and Methods.
	Ben Lee/ 9781682513835/ Price:US$ 155.00

	Solid-state electronic devices are part of our everyday lives. This book covers applications of solid-state physics and technology to electronics and optoelectronics, including theory and device design with appropriate experimental backup; optical, electrical, morphological characterization techniques and parameter extraction with experimental application to real devices; device fabrication and synthesis, including device-related new materials growth, electro-optical characterization and performance evaluation.

SF05-470	Optical Semiconductor Devices.
	J.S. Mathew/ 9781682513934/ Price:US$ 155.00

	Semiconductors are present in most of the modern electronic devices that you use. Because of their merits over vacuum tubes, semiconductor devices have practically completely replaced them in all the fields of electronics. This book is devoted to optical semiconductor devices and their numerous applications in telecommunications, optoelectronics, and consumer electronics-areas where signal processing or the transmission of signals across fiber optic cables is paramount.

SF05-470	Plasmonics: Properties, Synthesis and Applications.
	Dharani Sabba/ 9781773610542/ Price:US$ 155.00

	This text is a comprehensive guide that includes the application of plasmonics as sensors for disease, gas, liquid, and refractive index. This book illustrates the various strategies and fabrication techniques of plasmonic materials and devices. This book will provide the reader with valuable information and strategies to extend his knowledge on the existing technologies and to draft novel approaches that would enhance the efficacy of current technologies.

SF05-470	Organic Semiconductors.
	Dharani Sabba/ 9781773610559/ Price:US$ 155.00

	This book is packed with information about the application of organic semiconductor materials in the field of electronics. The information included in this text illustrates the various materials, their synthesis, properties, processing parameters and their application in OFETs. This book will help students, engineers and researchers working in the field of electrical engineering, chemistry, physics and material science to build upon their existing knowledge to create a foundation for more advanced study.

SF05-470	Handbook of Spintronics.
	Nelson Bolivar/ 9781773611006/ Price:US$ 160.00

	This book provides a critical analysis on the last theoretical and experimental achievements in the field of spin-based electronics in semiconductors. In particular, the properties of dilute and ferromagnetic semiconductors, and the optical responses of electron spins are studied. Moreover, the dynamics, manipulation and transport of spin-polarized electrons are considered. This book guides the reader to the forefront of research and development in the field.

SF05-470	Organic Electronic Devices.
	Klaus Petritsch/ 9781773611655/ Price:US$ 160.00

	This book brings together recent developments and research on organic electronic devices. Focuses on light-sensing devices; it reviews the development and known physical principles of organic solar energy harvesting devices. Furthermore, it is dedicated to light-emitting device structures and light-independent devices. It delves into recent progress in organic device manufacturing techniques including the accurate alignment during high-throughput roll-to-roll printing, directional self-assembling of polymer chains, patterning of organic conductors on textiles, spray printing of organic semiconducting single crystals, etc.

SF05-470	Semiconductor Spintronics.
	Stefano Spezia/ 9781773611259/ Price:US$ 165.00

	This book focuses on the latest theoretical and experimental achievements in the field of spin-based electronics in semiconductors. In particular, the properties of dilute and ferromagnetic semiconductors, and the optical responses of electron spins are studied. Moreover, the dynamics, manipulation and transport of spin-polarized electrons are considered. This book is intended to students to semiconductor physics and semiconductor devices as well as researchers in this field.

	Electromagnetic Non-Destructive Evaluation (XXI)
	Lesselier D.;Reboud C./ 9781614998358/ Price:EUR 125.00

	Electromagnetic Nondestructive Evaluation (ENDE) is a technique crucial to a great many engineering activities, as well as to environmental evaluation and protection issues. It is a discipline recognized for its theoretical insight, efficient models and simulations, robust data interpretation, and accurate instrumentation. This book presents contributions from the 22nd ENDE International Workshop, held in Saclay, France, in September 2017. It includes 1 of the 3 keynotes and 34 peer-reviewed and extended versions of the 47 oral contributions delivered during the workshop. Topics covered include static to THz electromagnetic; smart models and high-performance computations; advanced sensors; adaptive databases; model selection and the qualification of uncertainty; multi-sensor data fusion; the monitoring and diagnosis of mechanical structures; and innovative industrial applications.

	Nanocomposites for Electrochemical Capacitors
	Inamuddin/ 9781945291524/ Price:US$ 125.00

	The book explores recent developments in the area of composite applications for supercapacitor electrodes based von conducting polymers, graphene, biomass, or carbonaceous quantum dots. Synthesis strategies of composite materials and electrode preparation methods are discussed in detail.

VF05-74	Power Systems Handbook, 4-Vols/Set
	Das, J. C./ 9781498745369/ Price:GBP 475.00

	This handbook on power systems consists of a set of 4 volumes. These books are carefully planned and designed to provide the state of art material on major aspects of electrical power systems, short-circuit currents, load flow, harmonics and protective relaying. Many aspects of power systems are transparent between different types of studies and analyses; knowledge of short-circuit currents and symmetrical component is required for protective relaying, and fundamental frequency load flow is required for harmonic analysis. Currently, power systems, large or small, are analyzed on digital computers with appropriate software. However, it is necessary to understand the theory and basis of these calculations to debug and decipher the results. The material is organized with sound theoretical base, practical applications, and case studies based on the author’s 45+ years of experience with real world problems. Features ‧An up-to-date reference and practical guide on power system analysis, exploring new trends and state of the art technology. ‧Includes studies based on Author’s 45+ years in solving many challenging real world problems of power systems and analyzing and studying industrial and utility power systems are included in the form of examples and problems. ‧Case studies and examples provided throughout volumes.

VF05-73	Transport of Information-Carriers in Semiconductors and Nanodevices
	El-Saba, Muhammad/ 9781522523123/ Price:US$ 225.00

	Rapid developments in technology have led to enhanced electronic systems and applications. When utilized correctly, these can have significant impacts on communication and computer systems. Transport of Information-Carriers in Semiconductors and Nanodevices is an innovative source of academic material on transport modelling in semiconductor material and nanoscale devices. Including a range of perspectives on relevant topics such as charge carriers, semiclassical transport theory, and organic semiconductors, this is an ideal publication for engineers, researchers, academics, professionals, and practitioners interested in emerging developments on transport equations that govern information carriers. Topics Covered ‧Charge Carriers ‧Electronic Spin Transport ‧Low-Dimensional Semiconductors ‧Nanotubes ‧Nanowires ‧Organic Semiconductors ‧Phonon Transport ‧Quantum Transport Theory ‧Semiclassical Transport Theory

VF05-72	Accelerating the Discovery of New Dielectric Properties in Polymer Insulation
	Du, Boxue/ 9781522523093/ Price:US$ 210.00

	Modern power systems have undergone tremendous progress due to the implementation of new technologies. With these advancements, the standards for insulation materials must be enhanced and revitalized. Accelerating the Discovery of New Dielectric Properties in Polymer Insulation is a pivotal source of academic research on emerging trends in the properties, applications, and developments of polymer dielectrics. Highlighting a range of relevant perspectives on topics such as high thermal conductivity, power storage, and wind energy, this book is ideally designed for students, professionals, academics, and practitioners interested in the optimization of power system infrastructures. Topics Covered ‧Cable Accessories ‧External Insulation ‧High Thermal Conductivity ‧High-Speed Train Systems ‧Nuclear Environments ‧Power Storage ‧Wind Energy

VF05-71	Recent Advances in Applied Thermal Imaging for Industrial Applications
	V. Santhi/ 9781522524236/ Price:US$ 205.00

	Although the technological boom has resulted in many advancements in modern society, it has also come with a few downfalls; most notably, the failure of new machines and equipment. This has prompted engineers to find suitable diagnostics tools to stop impending malfunctions and make working environments more efficient. Recent Advances in Applied Thermal Imaging for Industrial Applications is a critical reference source that outlines innovative analysis tools to combat systems failure in thermal imaging. Highlighting pertinent topics such as fuzzy c- means technique, human health diagnosis system, multidimensional processing, and optical analysis, this is an ideal resource for all engineers, practitioners, industry leaders, and researchers who are interested in staying up-to-date with advances in thermal imaging which prevents industrial system malfunctions. Topics Covered ‧Computational Intelligence ‧Human Health Diagnosis System ‧Medical Science ‧Multidimensional Processing ‧Optical Analysis ‧Personal Authentication ‧Photogrammetry Process ‧Smart Applications ‧Texture Feature Measurements

VF05-70	Handbook of Research on Nanoelectronic Sensor Modeling and Applications
	Mohammad Taghi Ahmadi/ 9781522507369/ Price:US$ 245.00

	Nanoelectronics are a diverse set of materials and devices that are so small that quantum mechanics need to be applied to their function. The possibilities these devices present outweigh the difficulties associated with their development, as biosensors and similar devices have the potential to vastly improve our technological reach. The Handbook of Research on Nanoelectronic Sensor Modeling and Applications begins with an introduction of the fundamental concepts of nanoelectronic sensors, then proceeds to outline in great detail the concepts of nanoscale device modeling and nanoquantum fundamentals. Recent advances in the field such as graphene technology are discussed at length in this comprehensive handbook, ideal for electrical engineers, advanced engineering students, researchers, and academics. Topics Covered ‧Biosensors ‧Chemiresistive Gas Sensors ‧Gas Sensors ‧Nanopores ‧Neutron Detection ‧Sensor Platform ‧Silicene Nanoribbons ‧Surface Plasmon Resonance ‧Trilayer Graphene-based FET ‧Wireless Nanosensor Networks

VF05-69	Handbook of Machine and Computer Vision: The Guide for Developers and Users
	Hornberg, Alexander/ 9783527413393/ Price:US$ 272.95

	The second edition of this accepted reference work has been updated to reflect the rapid developments in the field and now covers both 2D and 3D imaging. Written by expert practitioners from leading companies operating in machine vision, this one-stop handbook guides readers through all aspects of image acquisition and image processing, including optics, electronics and software. The authors approach the subject in terms of industrial applications, elucidating such topics as illumination and camera calibration. Initial chapters concentrate on the latest hardware aspects, ranging from lenses and camera systems to camera-computer interfaces, with the software necessary discussed to an equal depth in later sections. These include digital image basics as well as image analysis and image processing. The book concludes with extended coverage of industrial applications in optics and electronics, backed by case studies and design strategies for the conception of complete machine vision systems. As a result, readers are not only able to understand the latest systems, but also to plan and evaluate this technology. With more than 500 images and tables to illustrate relevant principles and steps.

SF05-504	Python for Microcontrollers: Getting Started with MicroPython
	Donald Norris/ 9781259644535/ Price:US$ 20.00



SF05-490	Standard Specification for Concentric-Lay-Stranded Copper Conductors, Hard, Medium-Hard, or Soft
	/ B0008-11R17/ Price:US$ 63.21



SF05-488	Electrical Engineering: Concepts and Applications.
	Rongie N. Bolanos/ 9781680956849/ Price:US$ 145.00



SF05-488	Introduction to Circuits and Systems.
	Aldon Cris B. Galido/ 9781680959031/ Price:US$ 145.00



SF05-475	Introduction to Modern Power Electronics.
	Galang, Maureen R./ 9781680959062/ Price:US$ 145.00



SF05-475	Introduction to Robotics.
	Galang, Maureen R./ 9781680959079/ Price:US$ 145.00



SF05-475	Illustrated Handbook of Optics.
	/ 9781680946543/ Price:US$ 180.00

	Optics is the field of science and the area of economic activity encompassing the physical phenomena and technologies associated with the generation, transmission, manipulation, detection, and utilization of light. It extends on both sides of the visible part of the electromagnetic spectrum as far as the same concepts apply. This guide covers a very large domain and is experiencing indisputable growth. It has enabled the development of a considerable number of instruments, the optical component or methodology of which is often the essential part of portent systems.

SF05-475	Introduction to Remote Sensing.
	Kazantsev, Taras/ 9781680956689/ Price:US$ 145.00

	Remote sensing is a technology that employs electromagnetic sensors to measure and monitor changes in the earth’s surface and atmosphere. This text presents the fundamental concepts covering various stages of remote sensing, and their applications in plant sciences, hydrology, earth sciences, and land use analysis. Remote sensing is the science of obtaining information about objects or areas from a distance, typically from aircraft or satellites. Remote sensors collect data by detecting the energy that is reflected from Earth. These sensors can be on satellites or mounted on aircraft. Remote sensors can be either passive or active. Passive sensors respond to external stimuli. They record natural energy that is reflected or emitted from the Earth’s surface. The most common source of radiation detected by passive sensors is reflected sunlight.

SF05-475	Control Theory Fundamentals.
	Suarez, Laurence B./ 9781680956818/ Price:US$ 145.00



SF05-475	Engineering Electromagnetics.
	Randrianarisoa, Harinirina/ 9781680944082/ Price:US$ 170.00

	Engineering electromagnetics teaches fundamental concepts and problem solving from their theoretical conception to their practical realizations. Numerous analogies and illustrations are provided to aid the reader in grasping the concepts with ease. This book covers the advanced knowledge engineers involved in electromagnetics.

SF05-475	Electric Circuits. (With DVD)
	/ 9781680954869/ Price:US$ 79.95

	An electric circuit is a path in which electrons from a voltage or current source ow. Typically, an electric circuit is composed of wires and cables connected to circuit elements and devices that leverage the ow and resistances. The circuit is a closed loop formed by a power source, wires, a fuse, a load, and a switch. Electricity ows through the circuit and is delivered to the object it is powering, such as the vacuum motor or light bulb, after which the electricity is sent back to the original source; this return of electricity enables the circuit to keep the electricity current owing. Most devices that run on electricity contain an electrical circuit; when connected to a source of power, such as being plugged into an electrical outlet, electricity can run through the electrical circuit within the device and then return to the original power source, to continue the owof electricity.

SF05-475	Electrical Machines. (With DVD)
	/ 9781680954876/ Price:US$ 79.95

	Recent advances in power electronics and high-speed microprocessors have led to considerable attention in electrical machines with regard to their applications in industrial drives. It is anticipated that the work presented in this book will be of immense bene t to practicing engineers especially in areas of machine design, maintenance, and protection. Electric machines, in the form of generators, produce virtually all electric power on Earth, and in the form of electric motors consume approximately 60% of all electric power produced. Electric machines were developed beginning in the mid-19th century and since that time have been a ubiquitous component of the infrastructure. Developing more e cient electric machine technology is crucial to any global conservation, green energy, or alternative energy strategy.

SF05-475	Electromagnetic Theory. (With DVD)
	/ 9781680954890/ Price:US$ 79.95

	The electromagnetic theory is a united theory of electromagnetism established by James Clerk Maxwell. This theory primarily discusses the relationships between electric eld and magnetic eld based from previous observations and experiments related to electricity, magnetism and optics combined. The history of electromagnetic theory begins with ancient measures to understand atmospheric electricity, in particular lightning. People then had little understanding of electricity, and were unable to explain the phenomena. Scienti c understanding into the nature of electricity grew throughout the eighteenth and nineteenth centuries through the work of researchers such as Ampere, Coulomb, Faraday and Maxwell. In the 19th century it had become clear that electricity and magnetism were related, and their theories were uni ed: wherever charges are in motion electric current results, and magnetism is due to electric current. The source for electric eld is electric charge, whereas that for magnetic eld is electric current.

SF05-475	Live-Line Operation and Maintenance of Power Distribution Networks.
	Li, Tianyou/ 9781119055532/ Price:US$ 145.00



SF05-475	Biopolymer Composites in Electronics.
	Sadasivuni, Kishor K./ 9780128092613/ Price:US$ 150.00



SF05-475	Digital Signal Processing.
	/ 9781680954012/ Price:US$ 64.95

	Digital signal processing (DSP) is the numerical manipulation of signals, usually with the intention to measure, lter, produce or compress continuous analog signals. It is characterized by the use of digital signals to represent these signals as discrete time, discrete frequency, or other discrete domain signals in the form of a sequence of numbers or symbols to permit the digital processing of these signals. Digital signal processing and analog signal processing are sub elds of signal processing. DSP applications include audio and speech signal processing, sonar and radar signal processing, sensor array processing, spectral estimation, statistical signal processing, digital image processing, signal processing for comunications, control of systems, biomedical signal processing, seismic data processing, among others.

SF05-475	Electrical Engineering Drawing. (With DVD)
	/ 9781680954975/ Price:US$ 79.95

	Engineering drawings come in many forms. Each engineering eld has its own type of engineering drawings. For example, electrical engineers draw circuit schematics and circuit board layouts. An electrical drawing, is a type of technical drawing that demonstrates information about power, lighting, and communication for an engineering. Any electrical working drawing consists of "lines, symbols, dimensions, and notations to accurately convey an engineering's design to the workers, who install the electrical system on the job. It shows how the electrical wires are interconnected and can also show where xtures and components may be connected to the system.

SF05-475	Algorithms for VLSI Design Automation. (With DVD)
	/ 9781680955095/ Price:US$ 79.95

	Gone are the days when huge computers made of vacuum tubes sat humming in entire dedicated rooms and could do about 360 multiplications of 10 digit numbers in a second. Though they were heralded as the fastest computing machines of that time, they surely don’t stand a chance when compared to the modern day machines. Modern day computers are getting smaller, faster, and cheaper and more power e cient every progressing second. Very-large-scale integration (VLSI) is the process of creating an integrated circuit (IC) by combining thousands of transistors into a single chip. VLSI began in the 1970s when complex semiconductor and communication technologies were being developed. Electronic design automation (EDA), also referred to as electronic computer-aided design (ECAD), is a category of software tools for designing electronic systems such as integrated circuits and printed circuit boards. The tools work together in a design ow that chip designers use to design and analyze entire semiconductor chips. Since a modern semiconductor chip can have billions of components, EDA tools are essential for their design.

SF05-475	Industrial Circuits and Automated Manufacturing Handbook.
	Walker, C./ 9781682512104/ Price:US$ 160.00

	Manufacturing systems consist of human workers, automation, and various material handling technologies, configured in ways that create specific manufacturing system typologies. This book addresses some of the fundamental aspects as related to the automation of processing equipment used in integrated circuit manufacturing. It also provides comprehensive coverage of components, circuits, instruments, and control techniques used in industrial automated industry.

SF05-475	Optomechanical Systems Engineering.
	Maikel, C./ 9781682512197/ Price:US$ 150.00

	This book emphasizes a practical, systems-level overview of optomechanical engineering, showing throughout how the requirements on the optical system flow down to those on the optomechanical design. It reviews how optical system concepts flow down into optomechanical requirements on optical fabrication, alignment, structural design, mechanics of materials, structural vibrations, thermal management, and kinematic mounts.

SF05-475	Electrical Systems Design. (With DVD)
	/ 9781680954999/ Price:US$ 79.95

	A successful electrical power and lighting project depends on e ective planning in the form of drawings, schedules, and contract speci cations. Electrical system design is the design of electrical systems. This can be as simple as a ashlight cell connected through two wires to a light bulb or as involved as the space shuttle. Electrical systems are groups of electrical components connected to carry out some operation. Often the systems are combined with other systems. They might be subsystems of larger systems and have subsystems of their own. For example, a subway rapid transit electrical system is composed of the wayside electrical power supply, wayside control system, and the electrical systems of each transit car. Each transit car’s electrical system is a subsystem of the subway system. Inside of each transit car there are also subsystems, such as the car climate control system.

SF05-475	Electrical Motor Control Systems. (With DVD)
	/ 9781680955002/ Price:US$ 79.95

	Once the proper motor is selected, understanding the many various control devices available and their uses and limitations becomes an important part related to reliable operation and protection of the motor and the personnel using the motor. An understanding of each of these areas is necessary to e ectively apply motor control principles and equipment to e ectively operate and protect a motor. Motor controllers can be manually, remotely or automatically operated. They may include only the means for starting and stopping the motor or they may include other functions. This book discusses the basic concepts of electric motor, including motor control. A motor controller is a device or group of devices that serves to govern in some predetermined manner the performance of an electric motor. A motor controller might include a manual or automatic means for starting and stopping the motor, selecting forward or reverse rotation, selecting and regulating the speed, regulating or limiting the torque, and protecting against overloads and faults.

SF05-475	Power System Engineering.
	Cleary, D./ 9781682512326/ Price:US$ 150.00

	Power systems engineering is a subfield of energy engineering and electrical engineering that deals with the generation, transmission, distribution and utilization of electric power and the electrical devices connected to such systems including generators, motors and transformers. This book offers a complete overview of power systems and their power electronics applications, and presents a thorough examination of the fundamental principles, combining theories and technologies that are usually treated in separate specialized fields, in a single unified hierarchy.

SF05-467	Electrical Power System.
	Wadhwa, C. L./ 9781781831014/ Price:GBP 45.00

	This book provides a clear, systematic and exhaustive exposition of the various dimensions of electrical power systems. Both basic and advanced topics have been thoroughly explained and illustrated through solved examples. Salient Features: Fundamentals of power systems, line constant calculations and performance of overhead lines discussed. Mechanical design of lines, HVDC lines, Corona, Insulators and Insulated cables explained. Voltage control, Neutral grounding and Transients in power systems explained. Fault calculation, Protective relays including Digital relays and Circuit breakers discussed in that order. Power systems synchronous stability and Voltage stability explained. Insulation coordination and overvoltage protection explained. Zbus formulation, Power transformers and Synchronous machines as power system elements highlighted. State Estimation of Power System under steady state conditions exhaustively covered.

SF05-467	HVDC Power Transmission Systems.
	Padiyar, K. R./ 9781781831076/ Price:GBP 30.00

	The application of HVDC technology has received new impetus with the evacuation of large quantum of power from remote hydro and thermal stations. In addition, the controllability of power flows in the power grid has added a new dimension to the use of HVDC links in the context of developing Smart Grids. The power transfer from off shore wind generation is another new application. DC transmission at distribution level voltages (using VSC-HVDC) is also being considered for integration of distributed generation in the power grid. This edition is a complete revision of the earlier edition taking into account the developments that have taken place since then. In particular, the emerging technology of VSC-HVDC links is described in detail. Instead of adding new chapters to present the new developments, the new material is added at the appropriate places. For example, the analysis of VSC is presented in Chapters 2 and 3 along with the thyristor based Line Commutated Converters (LCC). Practically, in all chapters, there is discussion of VSC-HVDC. The book also presents other developments such as the application of hybrid active filters, capacitor commutated converters, double and triple tuned filters, etc. Chapter 10 presents power flow analysis in AC-DC systems based on a novel approach. The modeling, simulation and study of interactions among AC-DC systems are covered in the last 2 chapters without missing any relevant topic. The appendices give details of thyristor and IGBT valves, transient simulation of converters and DC lines, synchronous generator modeling, SSR analysis, CIGRE Benchmark models and design of DC and AC voltage controls in VSC-HVDC links. Several examples and case studies are included to illustrate the concepts. “This edition contains a new Appendix on the Modular Multilevel Converter (MMC) based VSC-HVDC transmission.”

SF05-463	Illustrated Handbook of Basic Electronics.
	/ 9781680946826/ Price:US$ 180.00

	We are now living in the age of electronics. Electronics are tied into so many different aspects of our life. Electronics dominate the world today and many of the people in it. Within the past twenty years or so, so many improvements and advancements in technology have created a world which relies on electronic services and communication. Nowadays, it is not uncommon to own numerous electronics for one reason or another. All of them have a purpose and many of them seem quite necessary in day to day lives of people. It is hard to find an electrical item in your home that does not have electronics partnered with it, in some way. Most of us begin our day by waking up to an electronic alarm clock. The foremost and primary aim of the book is to meet the requirements of students pursuing courses of study in Electronics and Communication Engineering.

SF05-463	Illustrated Handbook of VLSI Design.
	/ 9781680947007/ Price:US$ 180.00

	Very-large-scale integration (VLSI) is the process of creating an integrated circuit (IC) by combining thousands of transistors into a single chip. VLSI began in the 1970s when complex semiconductor and communication technologies were being developed. The microprocessor is a VLSI device. Before the introduction of VLSI technology most ICs had a limited set of functions they could perform. An electronic circuit might consist of a CPU, ROM, RAM and other glue logic. VLSI lets IC designers add all of these into one chip. This illustrated book emphasizes the physical understanding of underlying principles of the subject, aimed primarily for undergraduate student?s courses in VLSI design.

SF05-463	Illustrated Handbook of Electromagnetism.
	/ 9781680947014/ Price:US$ 180.00

	Electromagnetism is a branch of physics involving the study of the electromagnetic force, a type of physical interaction that occurs between electrically charged particles. The electromagnetic force plays a major role in determining the internal properties of most objects encountered in daily life. Ordinary matter takes its form as a result of intermolecular forces between individual atoms and molecules in matter, and is a manifestation of the electromagnetic force. Electrons are bound by the electromagnetic force to atomic nuclei, and their orbital shapes and their influence on nearby atoms with their electrons is described by quantum mechanics. The electromagnetic force governs the processes involved in chemistry, which arise from interactions between the electrons of neighboring atoms. This illustrated work aims to cover some additional aspects of theory and nearly all modern applications.

SF05-463	Introduction to Digital Signal Processing.
	Galang, Maureen R./ 9781680959048/ Price:US$ 145.00



SF05-463	Electronics Engineering.
	Bolanos, Rongie N./ 9781680956856/ Price:US$ 145.00



SF05-462	Electronics and Electrical Measurements and Instrumentation. (With DVD)
	/ 9781680954951/ Price:US$ 79.95

	Electrical measurements are the methods, devices and calculations used to measure electrical quantities. Measurement of electrical quantities may be done to measure electrical parameters of a system. Using transducers, physical properties such as temperature, pressure, ow, force, and many others can be converted into electrical signals, which can then be conveniently measured and recorded. High-precision laboratory measurements of electrical quantities are used in experiments to determine fundamental physical properties such as the charge of the electron or the speed of light, and in the de nition of the units for electrical measurements, with precision in some cases on the order of a few parts per million. Less precise measurements are required every day in industrial practice. Electrical instruments measure the various electrical quantities like electrical power factor, power, voltage and current etc. All analog electrical instruments use mechanical system for the measurement of various electrical quantities but as we know the all mechanical system has some inertia therefore electrical instruments have a limited time response.

SF05-462	Design of Electrical Services for Buildings. (With DVD)
	/ 9781680954968/ Price:US$ 79.95

	Electrical Services design assess the structure’s projected volume of energy consumption and then provide adequate solutions to reduce the energy demand, maintain the lowest possible greenhouse emissions. Electricians on the other hand are the people who make these plans and concepts a reality by being part of the construction process and physically installing the rolls of wires into place. Electrical services designs are usually for larger developments and commercial buildings as opposed to smaller residential additions or alterations which can be wired by a quali ed electrician with little design. Because electrical design projects can be extensive and very complex, electrical engineers often provide input at every stage, from master planning to the nal product. Electrical engineers involved in electrical design must be technically competent with a variety of engineering and design software packages and various laboratory equipment and instruments. They also need strong interpersonal skills to interact with clients and other professionals, including sales & marketing, mechanical engineers, software engineers, research & development, support personnel and others.

SF05-462	Residential, Commercial and Industrial Electrical Systems. (With DVD)
	/ 9781680955019/ Price:US$ 79.95

	Electrical systems are groups of electrical components connected to carry out some operation. Often the systems are combined with other systems. They might be subsystems of larger systems and have subsystems of their own. For example, a subway rapid transit electrical system is composed of the wayside electrical power supply, wayside control system, and the electrical systems of each transit car. Each transit car’s electrical system is a subsystem of the subway system. Inside of each transit car there are also subsystems, such as the car climate control system.

SF05-462	Electrical Safety. (With DVD)
	/ 9781680954982/ Price:US$ 79.95

	Electricity plays a vital part in everyday life. Using electricity, people can turn on lights, prepare meals, and complete home improvement projects. However, electricity is a very powerful force, and if proper safety measures are not taken, it can be extremely dangerous and even deadly. Accidents can be prevented by practicing safety around electric appliances, tools, and power lines. Electricity can kill or severely injure people and cause damage to property. The safe and e cient use of electricity at home or workplace is important and may assist you to reduce electricity usage.

SF05-462	Advanced Power Electronics. (With DVD)
	/ 9781680954814/ Price:US$ 79.95

	Power electronics is the study of switching electronic circuits in order to control the ow of electrical energy. It is the technology behind switching power supplies, power converters, power inverters, motor drives, and motor soft starters. It also refers to a subject of research in electronic and electrical engineering which deals with the design, control, computation and integration of nonlinear, time-varying energy-processing electronic systems with fast dynamics. Almost all the new electrical and electromechanical equipment contain power circuits. The power levels encountered in this eld range from less than one watt in supplies for the battery-operated portable equipment to tens, hundreds, or thousands of watts in power units of o ce equipment, kilowatts to megawatts in variable-speed motor drives, approaching megawatts in the recti ers and inverters that interface the local transmission lines with the high power systems.

SF05-460	Digital Electronics.
	Tokheim, Mccall/ 9781682512111/ Price:US$ 150.00

	Digital electronics are electronics that handle digital signals–discrete bands of analog levels–rather than by continuous ranges. All levels within a band of values represent the same numeric value. Digital electronic circuits are usually made from large assemblies of logic gates, simple electronic representations of Boolean logic functions. This book offers a friendly presentation of the fundamental principles and practices of modern digital design.

SF05-460	New Applications of Electric Drives.
	Crowder, W./ 9781682512128/ Price:US$ 150.00

	Electrical drives have become the most essential equipment nowdays in the electrical motors and other rotating machines. In very simple words, the systems which control the motion of the electrical machines, are known as electrical drives. A typical drive system is assembled with an electric motor and a sophisticated control system that controls the rotation of the motor shaft. This book focuses on the selection and application of electrical drives and control systems for electromechanical and mechatronics applications makes it uniquely useful for engineers in industry working with machines and drives.

SF05-460	Induction Motors: Applications, Control and Fault Diagnostics.
	Blair, Steve/ 9781682512135/ Price:US$ 150.00

	Induction motors is a type of electric motor in which alternating current from a power source is fed through a primary winding and induces a current in a secondary winding, with the parts arranged so that the resulting magnetic field causes a movable rotor to rotate with respect to a fixed stator. This book comprehends the applications, control and fault diagnostics of induction motors.

SF05-460	Industrial Motion Control.
	Clarke, D./ 9781682512180/ Price:US$ 150.00

	Motion control is widely used in all types of industries including packaging, assembly, textile, paper, printing, food processing, wood products, machinery, electronics and semiconductor manufacturing. Industrial motion control applications use specialized equipment and require system design and integration. This book presents basic principles and the functionality of motion control systems, followed by a closer look on the different types of electrical motors and feedback components.

SF05-460	Optical Amplifiers.
	Ali, M./ 9781682512333/ Price:US$ 150.00

	Optical amplifier is a device that amplifies an optical signal directly, without the need to first convert it to an electrical signal. An optical amplifier may be thought of as a laser without an optical cavity, or one in which feedback from the cavity is suppressed. Optical amplifiers are important in optical communication and laser physics. This book provides a comprehensive treatment of the design and applications of the opticalamplifier.

SF05-460	Algorithms for VLSI Design Automation.
	Johnson, Brian/ 9781682512241/ Price:US$ 150.00

	Very-large-scale integration (VLSI) is the process of creating an integrated circuit (IC) by combining thousands of transistors into a single chip. VLSI is the current level of computer microchip miniaturization and refers to microchips containing in the hundreds of thousands of transistors. This book focuses on the algorithms which are the building blocks of the design automation software which generates the layout of VLSI circuits.

SF05-460	Vacuum Microelectronics.
	Yaan, C./ 9781682512258/ Price:US$ 150.00



SF05-460	Electronic Amplifiers and Circuit Design: Art and Practice.
	Miller, Anton/ 9781682512272/ Price:US$ 150.00

	Electronic amplifier is an electronic component that can increase the power of a signal. An amplifier functions by taking power from a power supply and controlling the output to match the input signal shape but with a larger amplitude. The process of circuit design can cover systems ranging from complex electronic systems all the way down to the individual transistors within an integrated circuit. This book focuses on types of amplifiers and design factors that affect bandwidth and frequency response, types of coupling including electronic networks and transformers, impedance considerations.

SF05-460	Superconductors: New Developments.
	Moreira, Olga/ 9781680943603/ Price:US$ 175.00

	Imagine a coil which, once an electrical current begins coursing through it, allows for the energy to flow forever without requiring power supply. Before the 20th century, imagining this would be avant-garde and an excellent premise for a science-fiction novel. Nowadays, we do not have to imagine because superconducting coils are real. Since the discovery of superconductivity, researchers and engineers have busy developing new superconductor materials that can be used in wide range of devices. Coils made of superconducting wire are used daily in MRI (magnetic resonance imaging) scanners in hospitals all over the worlds; in Maglev trains in Japan; even in particle accelerators such as the Large Hadron Collider (LHC) at CERN in Geneva. Broader applications of superconductors have always been hindered by the high cost of refrigeration (i.e. cooling of materials to low temperatures) and of the superconducting coils themselves. With the discovery of high-temperature superconductors in the latter half of the 1980?s, the additional costs involved in manufacturing dropped and this opened up the potential for a variety of promising future applications. The vast potential to influence society and science is unquestionable when considering applications like high-performance electric power transmission, transformers, power storage devices, high-speed digital circuit elements, quantum computing circuits, and fusion reactors. If room-temperature superconductors are discovered, these will revolutionize the supply of electricity. They would certainly change the world as we know it today, and the possibility once again would emerge for contraptions and devices we presently think only conceivable in our collective imagination and portrayed in science-fiction movies to become real. New developments suggest there is still much to learn about superconductivity and that it can be discovered at unexpected (or held to be impossible) temperatures.

SF05-460	Thermal Power Plants: Advanced Applications.
	Randrianarisoa, Harinirina/ 9781680943634/ Price:US$ 175.00

	A thermal power station is a power plant in which heat energy is converted to electric power. In most of the world the prime mover is steam driven. Water is heated, turns into steam and spins a steam turbine which drives an electrical generator. This book deals with various aspects of a thermal power plant, providing a new dimension to the subject, with focus on operating practices and troubleshooting, as well as technology and design.

SF05-460	Photonic Crystals: Introduction, Theory and Applications.
	Petritsch, Klaus/ 9781680943658/ Price:US$ 170.00

	Photonic crystals are periodic optical structures that can control the flow of light in the same way that the periodic potential in a semiconductor crystal affects the flow of electrons. After an introduction of the principles behind the unusual properties, and how they enable both the design of various sensors and the spectacular color changes accomplished by chameleons, the book describes several fascinating and unexpected theoretical aspects, methods, and discoveries how atoms can be trapped or photons could be guided ?beyond photonic bandgaps?. Specific examples of photonic crystal applications are discussed in the third part. They include smart supercapacitors, torque sensors, optimized light trapping in solar cells, photonic tweezers, pressure-responsive shape memory, and NOT gates for quantum computers.

SF05-460	Advances in Measurement Systems.
	Randrianarisoa, Harinirina/ 9781680943665/ Price:US$ 175.00

	A system of measurement is a collection of units of measurement and rules relating them to each other. Systems of measurement have historically been important, regulated and defined for the purposes of science and commerce. There are several different tools available for the measurement and inspection of parts and products. The specific application often determines the best choice as each tool has its own benefits and drawbacks. Over the years, these tools have become more advanced to keep up with improved quality standards. This book discusses various measurement tools and how they are used, focusing on the advantages of portable CMMs, and why they are the preferred tool in many instances.

SF05-460	Applied Measurement Systems.
	Randrianarisoa, Harinirina/ 9781680943689/ Price:US$ 170.00

	Measurement is a multidisciplinary experimental science. Measurement systems synergistically blend science, engineering and statistical methods to provide fundamental data for research, design and development, control of processes and operations, and facilitate safe and economic performance of systems. In recent years, measuring techniques have expanded rapidly and gained maturity, through extensive research activities and hardware advancements. Applied Measurement Systems attempts to provide a comprehensive presentation and in-depth guidance on some of the key applied and advanced topics in measurements for scientists, engineers and educators.

SF05-460	Electrical Engineering Materials.
	Sabba, Dharani/ 9781680943924/ Price:US$ 165.00

	Research in electronic materials and its application in electrical engineering is rapidly progressing as it could pave way for advancements in electronics, optics, biotechnology, green energy generation as well as in medical diagnosis. In order to develop novel electronic materials and devices, it is pertinent to understand the underlying physics of these materials and devices at the micro and nano scale. As such this book underlines materials structure, their properties, their applications in various fields such as solar industry, high performance computing, nanotechnology, etc.

SF05-460	Instrumentation and Measurement in Electrical Engineering.
	Randrianarisoa, Harinirina/ 9781680943948/ Price:US$ 170.00

	Instrumentation is the development or use of measuring instruments for observation, monitoring or control. An instrument is a device that measures a physical quantity, such as flow, temperature, level, distance, angle, or pressure. This book is primarily intended to cover all necessary topics of instrumentation and measurement. This book should be of valuable reference for engineers and practitioners to expand or refresh their knowledge in this field.

SF05-460	Fourier Transform: Signal Processing.
	Moreira, Olga/ 9781680943955/ Price:US$ 170.00

	The Fourier Transform is a tool that breaks a waveform (a function or signal) into an alternate representation, characterized by sine and cosines. The Fourier Transform shows that any waveform can be re-written as the sum of sinusoidal functions. This book presents an introduction to the principles of the fast Fourier transform. The book covers topics of FFTs, frequency domain filtering, and applications to video and audio signal processing. This authoritative book provides comprehensive coverage of practical Fourier analysis.

SF05-460	Electromagnetic Modeling and Simulation.
	Moreira, Olga/ 9781680943962/ Price:US$ 170.00

	Electromagnetic modeling is essential to the design and modeling of antenna, radar, satellite, medical imaging, and other applications. This unique book presents simple, easy-touse, but effective short codes as well as virtual tools that can be used by electrical, electronic, communication, and computer engineers in a broad range of electrical engineering problems. Electromagnetic Modeling and Simulation covers fundamental analytical and numerical models that are widely used in teaching, research, and engineering designs.

SF05-460	Advances in Solid State Circuit Technologies.
	Bolivar, Nelson/ 9781680943979/ Price:US$ 175.00

	Solid-state electronics are those circuits or devices built entirely from solid materials and in which the electrons, or other charge carriers, are confined entirely within the solid material. This book is intended for a diverse readership including electrical engineers and material scientists in the industry and academic institutions. Readers will be able to familiarize themselves with the latest technologies in the various fields.

SF05-460	Engineering Superconductivity.
	Bolivar, Nelson/ 9781680943986/ Price:US$ 170.00

	Engineering Superconductivity provides full coverage of the fundamentals of superconducting behavior and explains the properties and fabrication methods of commercially produced superconductors. Up-to-date material on superconductor applications as well as competing technologies is included. Superconductivity is the ability of certain materials to conduct electric current with practically zero resistance. This produces interesting and potentially useful effects.

SF05-460	Modern Semiconductor Device Physics.
	Bolivar, Nelson/ 9781680943993/ Price:US$ 165.00

	This book provides an in-depth, up-to-date presentation of the physics and operational principles of all modern semiconductor devices. Semiconductor devices are electronic components that exploit the electronic properties of semiconductor materials, principally silicon, germanium, and gallium arsenide, as well as organic semiconductors. Such devices have found wide applications because of their compactness, reliability, and low cost. As discrete components, they have found use in power devices, optical sensors, and light emitters, including solid-state lasers.

SF05-460	Electric Machines: Principles, Applications, and Control.
	Bolivar, Nelson/ 9781680944044/ Price:US$ 170.00

	Detailing the fundamental principles that govern electric machines and drives systems, this book describes the laws of induction and interaction and demonstrates their fundamental roles with numerous practical examples. This book combines the traditional areas of electric machinery with the latest in modern control and power electronics. An electrical machine is a device which converts mechanical energy into electrical energy or vice versa. Electrical machines also include transformers, which do not actually make conversion between mechanical and electrical form but they convert AC current from one voltage level to another voltage level.

SF05-460	Fundamentals of Power Electronics.
	Bolivar, Nelson/ 9781680944051/ Price:US$ 165.00

	The application of power electronics is increasingly being seen in residential, commercial, industrial, transportation, aerospace, and telecommunication systems. This comprehensive book provides fundamental knowledge for the analysis and design of modern power electronic devices. Power Electronics is the study of switching electronic circuits in order to control the flow of electrical energy. Power Electronics is the technology behind switching power supplies, power converters, power inverters, motor drives, and motor soft starters.

SF05-457	Refrigerant Tables and Charts Including Air Conditioning Data.
	Kothandaraman, C. P./ 9781781830239/ Price:GBP 20.00

	This compilation includes the following materials : Thermodynamic data for 27 refrigerants, covering temperatures from cryogenic to normal range Fifteen Pressure-enthalpy charts for important refrigerants Superheat data for an eco-friendly refrigerant Table of Thermo Physical properties like Thermal Conductivity, Viscosity for six refrigerants Table of comparative performance of important refrigerants Relative Ozone Depleting Potential (RODP) and Global Warming Potential (GWP) values for various refrigerants as provided by Environmental Protection Agency are given in table 45 The comparative performance parameters like the condenser pressure, evaporator pressure, volume flow per ton, COP and power per ton for various refrigerants for a specified Evaporator and Condenser temperatures namely—15 oC and 40 oC Data for quick calculation of Relative humidity using the difference between DBT and WBT are provided in another table Twelve Data tables for Air Conditioning System Design Tables and chart for Air Conditioning Duct Design and Selection Table of Pressure Loss Coefficient for Elbows and Bends Psychometric chart

	Career Guide: Electrician
	/ 9781680954111/ Price:US$ 34.95

	Without electricians, there would be no lights, telephones, computers, or televisions plugged into our walls. Electricians also repair all electric machines and work in factories fixing motors, generators, and robots. Could you imagine what life would be like without electricians insuring we have all the comforts and benefits that electricity provides? Electricians are tradesmen whose responsibilities are to design, install, maintain and troubleshoot electrical wiring systems. These systems can be located in homes, commercial or industrial buildings, and even machines and large pieces of equipment. Electricians work either inside or outside to make possible the use of lights, televisions, industrial equipment, appliances and many other items essential to life. Electricians are either inside wiremen or outside linemen. These are the main concentrations of a practicing electrical professional, but there are various areas of specialization within each category. Duties also vary widely with each type of position or specialization.

	Electromagnetic Nondestructive Evaluation (XX)
	H.G. Ramos/ 9781614997665/ Price:EUR 125.00

	This volume presents selected papers from the International Workshop on Electromagnetic Nondestructive Evaluation (ENDE2016), held in Lisbon, Portugal, in September 2016. This 21st edition of the workshop focused on the theoretical and application research into methods of electromagnetic non-destructive evaluation and, like previous editions, provided a forum for exchanging ideas and discussing recent developments. The book is divided into 6 sections which cover advanced ENDE sensors; material characterization; new developments; analytical and numerical modeling; inverse problems; signal processing; monitoring and diagnosis of mechanical structures; and innovative industrial applications of ENDE.

	Recent Advances in Photovoltaics
	Ramrakhiani Meera/ 9781945291364/ Price:US$ 125.00

	The search for new materials and/or new structures such as multi-junctions, nanostructures, photoelectrochemical cells, organic solar cells etc. for improved performance is discussed. The experimental investigations on certain materials and modelling for better results are also described in the book.

VF05-67	Field-Programmable Gate Array (FPGA) Technologies for High Performance Instrumentation
	Gazzano, Julio Daniel Dondo/ 9781522502999/ Price:US$ 185.00

	Field-Programmable Gate Array (FPGA) technologies have increased in popularity in recent years due to their adaptability and high computing potential. Further research in this area illustrates the potential for further advancements and applications of this useful technology. Field-Programmable Gate Array (FPGA) Technologies for High Performance Instrumentation presents experimental and theoretical research on FPGA-based design and the development of virtual scientific instrumentation that can be used by a broad segment of scientists across a variety of research fields. Focusing on crucial innovations and algorithms for signal processing, data acquisition mechanisms, FPGA-based hardware design, and parallel computing, this publication is a critical resource for researchers, development engineers, and graduate-level students. Topics Covered ‧Embedded System Development ‧High-Speed Data Acquisitions ‧Parallel Computing ‧Reconfigurable Computer Architectures ‧Scientific Instrumentation ‧System Testing and Verification

VF05-66	Design and Modeling of Low Power VLSI Systems
	Sharma, Manoj/ 9781522501909/ Price:US$ 205.00

	Very Large Scale Integration (VLSI) Systems refer to the latest development in computer microchips which are created by integrating hundreds of thousands of transistors into one chip. Emerging research in this area has the potential to uncover further applications for VSLI technologies in addition to system advancements. Design and Modeling of Low Power VLSI Systems analyzes various traditional and modern low power techniques for integrated circuit design in addition to the limiting factors of existing techniques and methods for optimization. Through a research-based discussion of the technicalities involved in the VLSI hardware development process cycle, this book is a useful resource for researchers, engineers, and graduate-level students in computer science and engineering. Topics Covered ‧Integrated Circuits ‧Low Power Benchmarking ‧Low Power Circuit Design ‧Low Power Modeling ‧Power Optimization ‧Routing Strategies ‧Testing Methodologies

VF05-65	Reliability in Power Electronics and Electrical Machines: Industrial Applications and Performance Models.
	Kaboli, Shahriyar/ 9781466694293/ Price:US$ 255.00

	In modern industries, electrical energy conversion systems consist of two main parts: electrical machines and power electronic converters. With global electricity use at an all-time high, uninterrupted operation of electrical power converters is essential. Reliability in Power Electronics and Electrical Machines: Industrial Applications and Performance Models provides an in-depth analysis of reliability in electrical energy converters as well as strategies for designing dependable power electronic converters and electrical machines. Featuring a comprehensive discussion on the topics of reliability design and measurement, failure mechanisms, and specific issues pertaining to quality, efficiency, and durability, this timely reference source offers practical examples and research-based results for use by engineers, researchers, and advanced-level students. Topics Covered ‧Availability in Power Converters ‧Condition Monitoring ‧Converter Quality ‧Fault Tolerant Power Converters ‧Reliability Improvement ‧Reliability Prediction ‧Reliability Testing ‧Thermal Modeling

VF05-64	Environmental Impacts on Underground Power Distribution.
	Gouda, Osama El-Sayed/ 9781466665095/ Price:US$ 225.00

	The successful transmission of electrical power beneath the surface of the earth depends on a number of factors including ambient temperature, sheath bonding, cable laying depth, and especially the formation of dry zones around underground cables. Environmental Impacts on Underground Power Distribution studies the factors which affect the maximum current rating of subterranean power cables as well as various methods to maximize electrical current transmission. Focusing on the latest tools, methodologies, and research in the field, this publication is designed for use by electrical engineers, academicians, researchers, and upper-level students. Topics Covered ‧Artificial Backfill Materials ‧Cable Losses ‧Cross Bonding System ‧Dry Zones ‧Electric Power Transmission ‧Heat Flux Density ‧Thermal Resistivity

SF05-483	Practical Holography
	Graham Saxby/ 9781138455719/ Price:GBP 170.00



SF05-475	Diesel Power Plant Operation & Maintenance: Intermediate (Book With DVD) (Workbook Included)
	/ 9789351158141/ Price:US$ 99.95

	The Diesel Power Plant Operation and Maintenance covers that a person must achieve to enhance the knowledge, skills and attitudes of a trainee/student in tending diesel engine operation as well as maintaining and repairing diesel engine. This book gives the details of the contents of the basic, common and core units of competency required in diesel power plant operation and maintenance.

SF05-475	Consumer Electronics: Advanced (Book With DVD) (Workbook Included)
	/ 9789351158035/ Price:US$ 99.95

	The information in this book consists of competencies that a person must possess to commission consumer electronic products and systems, train service technician and develop servicing system for consumer electronic products and systems.

SF05-475	Plumbing: Intermediate (Book With DVD) (Workbook Included)
	/ 9789351159001/ Price:US$ 99.95

	This book consists of competencies that a person must achieve in installing multiple units of plumbing system with multi-point hot- and cold-water lines for medium-rise buildings. It also includes plumbing repair and maintenance work.

SF05-475	Plumbing: Advanced (Book With DVD) (Workbook Included)
	/ 9789351159018/ Price:US$ 99.95

	The information in this book consists of basic to core competencies that a person must achieve in installing simple and complex plumbing systems including centralized and storage type of water heater system for high-rise buildings. He/she leads, supervises and works with the team.

SF05-475	Laboratory & Metrology/Calibration Services : Intermediate (Book With DVD) (Workbook Included)
	/ 9789351158660/ Price:US$ 99.95

	The information in this book consists of competencies that a person must achieve to perform laboratory and metrology/calibration services work. The competence in this area requires the understanding and knowledge of a wide spectrum of dimensional mensuration processes that includes scientific planning, execution, assessment and calibration.

SF05-475	Robust Design of Digital Circuits on Foil.
	Myny, Kris/ 9781107127012/ Price:GBP 105.00



SF05-475	Mechatronic Hands: Prosthetic and Robotic Design.
	Chappell, Paul H./ 9781785611544/ Price:GBP 110.00



SF05-475	Oscillator Circuits: Frontiers in Design, Analysis and Applications.
	Nishio, Yoshifumi/ 9781785610578/ Price:GBP 116.00



SF05-475	Power Systems-on-Chip: Practical Aspects of Design.
	Allard, Bruno/ 9781786300812/ Price:US$ 164.95



SF05-475	Digital Electronics 2: Sequential and Arithmetic Logic Circuits.
	Ndjountche, Tertulien/ 9781848219854/ Price:US$ 164.95



SF05-475	Electrical Energy Storage in Transportation Systems.
	Robyns, Benoit/ 9781848219809/ Price:US$ 164.95



SF05-475	Electricity Cost Modeling Calculations.
	Greer, Monica/ 9780128102176/ Price:US$ 135.00



SF05-475	Active Disturbance Rejection Control for Nonlinear Systems: An Introduction.
	Guo, Bao-Zhu/ 9781119239925/ Price:US$ 135.00



SF05-475	Harmonic Balance Finite Element Method: Applications in Nonlinear Electromagnetics and Power Systems.
	Lu, Junwei/ 9781118975763/ Price:US$ 140.00



SF05-475	Impedance Source Power Electronic Converters.
	Liu, Yushan/ 9781119037071/ Price:US$ 135.25



SF05-475	Ultra Low Power Electronics and Adiabatic Solutions.
	Fanet, Herve/ 9781848217386/ Price:US$ 164.95



SF05-457	Introduction to Control Engineering: Modeling, Analysis and Design.
	Mandal, Ajit K./ 9781781830215/ Price:GBP 35.00

	The material in the text has been organized for gradual and sequential development of control theory starting with a statement of the task of a control engineer at the very outset. This text presents a comprehensive analysis and design of continuous-time control systems and includes more than introductory material for discrete systems with adequate guidel ines to extend the results derived in connection with continuous-time systems. Most of the materials including solved and unsolved problems presented in the book have been class-tested in senior undergraduate courses in the field of control systems at the Electronics and Telecommunication Engineering Department, Jadavpur University, India. Some representative MATLAB scripts used for solving problems are included at the end of each chapter. The detailed design steps of fuzzy logic based controller using SIMULINK and MATLAB has been provided in the book to give the student a head start in this emerging discipline. In view of extensive use of MATLAB for rapid verification of controller designs, some notes for using MATLAB script M-files and function M-files are included at the end of the book. A chapter has been included to deal with non-linear components and their analysis using MATLAB and SIMULINK through user defined s-functions. Finally, a chapter has been included to deal with the implementation of digital controllers on finite bit computer, to bring out the problems associated with digital controllers. Transfer function and state variable models of typical components and subsystems have been derived in the Appendix at the end of the book

SF05-457	Microcontroller and Embedded Systems.
	Agrawal, J. P./ 9781781830185/ Price:GBP 40.00

	The text is designed for undergraduate engineering courses in Microcontroller 8051 and Embedded System. The treatment of the subject is done in a way so that it helps the tutor in presenting this complicated subject in an easy and interesting manner. A large number of programming problems with step-by-step solution will help the students to understand the subject properly.

SF05-456	Laboratory & Metrology/Calibration Services : Advanced (Book With DVD) (Workbook Included)
	/ 9789351158677/ Price:US$ 99.95

	The information in this book consists of competencies that a person must achieve to perform laboratory and metrology/calibration services work specifically on using comparison and basic measuring devices. It also include competency in measure components using coordinate measuring machines and use graphical techniques and perform simple statistical computations.

SF05-456	Line Construction (Electric Power Distribution): Intermediate (Book With DVD) (Workbook Included)
	/ 9789351158691/ Price:US$ 99.95

	The information in this book consists of competencies that a person must possess to erect distribution line poles, climb pole and install pole assembly, conductors, line equipment and devices as well as to install consumer service connection facility. Line construction involves work on non-energized lines, particularly construction/ extension of new electric power distribution lines.

SF05-456	Mechatronics Servicing: Intermediate (Book With DVD) (Workbook Included)
	/ 9789351158790/ Price:US$ 99.95

	The information in this book consists of competencies that must possess to enable a person to install, configure and test Mechatronics devices. The book includes designing, testing and operation of machinery and equipment, in which there is a high level of functional integration of mechanical systems with electronics and computer control.

SF05-456	Mechatronics Servicing: Advanced (Book With DVD) (Workbook Included)
	/ 9789351158806/ Price:US$ 99.95

	The information in this book consists of competencies that must possess to enable a person to install, configure, adjust, maintain and repair Mechatronics devices as well as develop software programs on Mechatronics systems.

SF05-456	Mechatronics Servicing: Expert (Book With DVD) (Workbook Included)
	/ 9789351158813/ Price:US$ 99.95

	The information in this book consists of competencies that must possess to enable a person to install, configure, adjust, maintain, and repair Mechatronics devices as well as develop software programs, perform diagnostics, troubleshooting, & commissioning on Mechatronics systems.

SF05-456	Plumbing: Beginner (Book With DVD) (Workbook Included)
	/ 9789351158998/ Price:US$ 99.95

	This book consists of competencies that a person must achieve in installing multiple units of plumbing system with multi-point hot- and cold-water lines for medium-rise buildings. It also includes plumbing repair and maintenance work.

SF05-456	Air Duct Servicing: Intermediate (Book With DVD) (Workbook Included)
	/ 9789351157625/ Price:US$ 99.95

	The information in this book consists of competencies that a person must achieve to enable him/her to interpret working drawing, fabricates, assembles and installs air ducts using hand and power tools and sheet metal working equipment.

SF05-456	Auto Engine Rebuilding: Intermediate (Book With DVD) (Workbook Included)
	/ 9789351157717/ Price:US$ 99.95

	The information in this book consists of competencies that a person must achieve to restore defective/worn-out engine parts back to manufacturer’s specifications; inspects, measures and interprets blueprints and repair procedures; sets up and operates variety of specialized metalworking machines and uses precision measuring instrument in repairing automotive engine parts.

SF05-456	Construction Lift Passenger Material Elevator Operation: Intermediate (Book With DVD) (Workbook Included)
	/ 9789351158004/ Price:US$ 99.95

	The information in this book consists of basic to core competency that individuals must achieve to enable them to operate construction lift passenger/ material elevator. It includes pre-operation, productive, post-operation, basic maintenance and enforcement of safety standards for lifts/ elevators.

SF05-456	PV System Design: Advanced (Book With DVD) (Workbook Included)
	/ 9789351159063/ Price:US$ 99.95

	The information in this book consists of competencies that a person must to be able to determine customer solar-energized load requirements and calculate system components requirements (system sizing) of small solar home systems up to 1kWp. It also include competency to prepare and specify components in Bill of Materials and prepare Installation drawing. A person who has achieved this qualification is competent to be PV System Designer; or PV System Design Technician.

SF05-456	PV System Servicing: Advanced (Book With DVD) (Workbook Included)
	/ 9789351159070/ Price:US$ 99.95

	The information in this book consists of competencies that a person must to be able to perform PV system maintenance, troubleshooting, and repair of small solar home systems up to 1kWp. A person who has achieved this Qualification is competent to be PV Systems Service Technician; or PV Systems Maintenance Technician; or PV Systems Repair Technician.

SF05-456	PV Systems Installation: Intermediate (Book With DVD) (Workbook Included)
	/ 9789351159087/ Price:US$ 99.95

	The information in this book consists of competencies that a person must achieve to enable him/her to perform site assessment, check PV components and materials’ compliance, install and commission PV system and prepare documentation requirements for PV systems installation. A person who has achieved this qualification is competent to be: PV Systems Installation Technician; or PV Systems Commissioning Technician.

SF05-456	Transport Rac Servicing: Intermediate (Book With DVD) (Workbook Included)
	/ 9789351159360/ Price:US$ 99.95

	Transport RAC Servicing: Intermediate comprehends various diverse practical and visual skills with knowledge of specialized materials and techniques. Road transport refrigeration equipment are required to operate reliably in much harsher environments than stationary refrigeration equipment. Due to the wide range of operating conditions and constraints imposed by available space and weight, transport refrigeration equipment have lower efficiencies than stationary systems. This book will introduce the knowledge and skills for those studying and/or working in HVAC/R industry to interpret and convey information in response to workplace requirements.

SF05-456	Consumer Electronics: Expert (Book With DVD) (Workbook Included)
	/ 9789351158042/ Price:US$ 99.95

	The information in this book consists of basic to core competencies that must possess to enable a person to manage servicing system for consumer electronic products and systems and to train service technician supervisor.

SF05-456	Diesel Power Plant Maintenance: Advanced (Book With DVD) (Workbook Included)
	/ 9789351158134/ Price:US$ 99.95

	The information in this book consists of competencies that a person must achieve to enhance the knowledge, skills and attitudes of a trainee/student in diagnosing, repairing and overhauling diesel engine as well as servicing alternator and diagnosing & repairing electrical system of a diesel power plant.

SF05-456	Micro-Nano Mechatronics: New Trends.
	Smith, Aaron/ 9781682500002/ Price:US$ 170.00

	Micro and Nano Mechatronics is the synergistic integration of micro and nano electromechanical systems and electronic technologies, with high added value. Micro/Nano mechatronics is currently used in broader spectra, ranging from basic applications in robotics, actuators, sensors, semiconductors, automobiles, and machine tools. Strong research efforts are being focused on development of organic combinations of multiple miniaturized actuators and sensors to perform complex motions and operations. Micro/nano technologies, as very important technologies for future robotics and automation, are becoming crucial to realizing high performance systems. The book of Micro-Nano Mechatronics: Future trends is devoted to the theory and applications of micro and nanotechnologies.

SF05-456	Fuzzy Controllers: Recent Advances in Theory and Applications.
	Johnson, Adam/ 9781682500019/ Price:US$ 170.00

	A fuzzy control system is a control system based on fuzzy logic—a mathematical system that analyzes analog input values in terms of logical variables that take on continuous values between 0 and 1, in contrast to classical or digital logic, which operates on discrete values of either 1 or 0. These systems range all the way from classical inverted pendulum to auto-focusing system of a digital camera. Fuzzy control systems have demonstrated their enhanced performance in all these areas. This book is envisioned for researchers, engineers, and postgraduate students specializing in fuzzy systems, control engineering, and robotics.

SF05-456	Robotic Systems: Applications, Control and Programming.
	Elkady, Ayssam/ 9781682500026/ Price:US$ 170.00

	Robotics deals with the design, construction, operation, and application of robots, as well as computer systems for their control, sensory feedback, and information processing. This book brings together some of the latest research in robot applications, control, modeling, sensors and algorithms.

SF05-456	Recent Advances in Mobile Robotics.
	Brown, Alan/ 9781682500033/ Price:US$ 170.00

	A mobile robot is an automatic machine that is capable of locomotion. Mobile robots have the capability to move around in their environment and are not fixed to one physical location. Mobile robots can be “autonomous” which means they are capable of navigating an uncontrolled environment without the need for physical or electro-mechanical guidance devices. The book Recent Advances in Mobile Robotics addresses the topic by integrating contributions from many researchers around the globe. It emphasizes the computational methods of programming mobile robots, rather than the methods of constructing the hardware.

SF05-456	Concept of Industrial Robotics.
	Jones, Albert/ 9781682500040/ Price:US$ 170.00

	Industrial robot is an automatically controlled, reprogrammable, multipurpose manipulator programmable in three or more axes, which may be either fixed in place or mobile for use in industrial automation applications. The field of robotics may be more practically defined as the study, design and use of robot systems for manufacturing. Typical applications of robots include welding, painting, assembly, pick and place, product inspection, and testing; all accomplished with high endurance, speed, and precision. This book emphasizes on the features and trends in industrial robotics.

SF05-456	Instrumentation and Measurement: Fundamentals.
	Foreman, Matthew R./ 9781682500774/ Price:US$ 170.00

	Instrumentation includes scientific activities and technologies that are related to measurement. It is a relation between physical, chemical and biological phenomena and their awareness by humans. Continually evolving, instrumentation changes how we live and plays a major role in industrial and life sciences; it is also essential to the fundamental sciences. So as to be credible, all new theories must undergo a series of experimental validations, of which instrumentation is the foundation. A measuring instrument is a device for measuring a physical quantity. In the physical sciences, quality assurance, and engineering, measurement is the activity of obtaining and comparing physical quantities of realworld objects and events. This book envisages on the fundamentals and prospects of instrumentation and measurement.

SF05-456	Polymer Photonics.
	Aguele, F. O./ 9781682502334/ Price:US$ 170.00

	Polymers are important materials for photonic applications; some examples are plastic optical components such as Fresnel lenses, light pipes, diffusers, and polarizers. Photonic crystals are a new class of periodic dielectric media that can provide novel ways to manipulate and control light. This book reviews on up-to-date activities in various fields of photonic polymers including their promising applications.

SF05-456	Graphene Optoelectronics.
	Cooper, Daniel R./ 9781682502365/ Price:US$ 180.00

	Graphene is a term for a special structure or allotrope of carbon atoms where they self-assemble themselves into double-bonded six carbon atom rings in two dimensional sheets. Graphene optoelectronics devices is one of the most promising fields being researched, because the material could improve the efficiency of light emitting diode (LED) panels used in everything from computer and television screens to light sensors. This book gives an up-to-date account of the many opportunities graphene offers highend optoelectronics and also focuses on potential as well as already realized applications, discussing metallic and passive components, such as transparent conductors and smart windows.

SF05-456	Microsensors.
	Minin, Igor V./ 9781682502723/ Price:US$ 170.00

	Microsensor is a very small sensor with physical dimensions in the submicrometer to millimeter range. A sensor is a device that converts a nonelectrical physical or chemical quantity, such as pressure, acceleration, temperature, or gas concentration, into an electrical signal. Sensors are an essential element in many measurement, process, and control systems, with countless applications in the automotive, aerospace, biomedical, telecommunications, environmental, agricultural, and other industries. The objective of the book is to provide topics in the area of microsensors for engineers, scientists, applied physicists and post-graduate students. Also the aim of the book is the continuous and timely dissemination of new and innovative research and developments in microsensors.

SF05-456	Recent Optical and Photonic Technologies.
	Mock, Adam/ 9781682502730/ Price:US$ 170.00

	Research and development in modern optical and photonic technologies have witnessed quite fast growing innovations in numerous fundamental and application areas due to availability of novel fabrication and measurement techniques, advanced numerical simulation tools and methods, as well as due to the increasing practical demands. The recent advancements have also been accompanied by the appearance of various interdisciplinary topics. The book attempts to put together state-of-the art research and development in optical and photonic technologies.

SF05-456	Designing Distributed Control Systems.
	Pisarski, Dominik/ 9781682502303/ Price:US$ 170.00

	A distributed control system (DCS) is an automated control system that monitors and provides instructions to different parts of a machine. Commonly used in manufacturing equipment, a DCS utilizes input and output protocols to control distributed equipment. DCS systems are commonly used in process industries controlling breweries, refineries, chemical plants, paper mills, etc. The key advantage of DCSs is that they divide up the control tasks among multiple distributed systems. This book outlines for designing distributed machine control system software architecture.

SF05-456	Solid State Devices and Electronics.
	Lebedev, Sergey G./ 9781682510254/ Price:US$ 170.00

	Solid-state electronics are those circuits or devices built entirely from solid materials and in which the electrons, or other charge carriers, are confined entirely within the solid material. Common solid- state devices include transistors, microprocessor chips, and RAM. In a solid-state component, the electric current is confined to solid elements and compounds engineered specifically to switch and amplify it. Current flow can be understood in two forms: as negatively charged electrons, and as positively charged electron deficiencies called holes. This book deals with the physics behind the operation of semiconductor devices and show how these principles are applied in several different types of semiconductor devices.

SF05-456	Physics of Electronic Devices.
	Babatope, Babaniyi/ 9781682510339/ Price:US$ 170.00

	The word electronics is derived from electron mechanics, which means to study the behavior of an electron under different conditions of applied electric field. The device which controls the flow of electrons is called electronic device. These devices are the main building blocks of electronic circuits. Electronic devices are playing a major role in everyday life. The various electronic devices we use in everyday life include mobile phones, digital camera, ATM, pen drive television and much more. This book covers the physical phenomena involved in the operation of semiconductor devices, and shows how the phenomena determine the properties of specific devices such as transistors, light emitting diodes and semiconductor lasers.

SF05-456	Control Methods for Electrical Machines.
	Nicolae D.V./ 9781682510742/ Price:US$ 170.00

	Electrical machines is synonymous with electric motor or electric generator, all of which are electromechanical energy converters, converting electricity to mechanical power or mechanical power to electricity. This book provide an extraordinarily range of technologies found in today’s state of the-art industrial electrical systems and the problem of how to control a number of different machines, whose interactions and outputs must be coordinated, is addressed and solutions are presented.

SF05-456	Diesel Power Plant Operation & Maintenance: Advanced (Book With DVD) (Workbook Included)
	/ 9789351158158/ Price:US$ 99.95

	The information in this book covers basic to core competencies that a person must achieve to enhance the knowledge, skills and attitudes of a trainee/student in diagnosing, repairing and overhauling diesel engine as well as servicing alternator and diagnosing & repairing electrical system of a diesel power plant.

SF05-456	Electrical Installation & Maintenance: Advanced (Book With DVD) (Workbook Included)
	/ 9789351158189/ Price:US$ 99.95

	The information in this book consists of a set of competencies required for related highly specialized vocational skilled workers such as linemen, substation technicians, electrical motors/generators repair technicians, etc.

SF05-456	Electrical Installation & Maintenance: Expert (Book With DVD) (Workbook Included)
	/ 9789351158196/ Price:US$ 99.95

	The information in this book consist of basic to core competencies that a candidate must achieve in order to perform the job requirements. This particular set of competencies is obligatory for related highly specialized vocational skilled workers such as linemen, substation technicians, electrical motors/generators repair technicians, etc. A candidate who has achieved all these competencies is qualified to be: Electrical Foreman, or Electrical Supervisor, or Supervising Technician.

SF05-456	Electrical Installation & Maintenance: Intermediate (Book With DVD) (Workbook Included)
	/ 9789351158202/ Price:US$ 99.95

	The information in this book covers basic to core competencies that a person must achieve to enable him/her to install and maintain electrical wiring, lighting and related equipment and systems where the voltage does not exceed 600 volts in residential houses/buildings.

SF05-456	Electronic Products Assembly and Servicing: Intermediate (Book With DVD) (Workbook Included)
	/ 9789351158219/ Price:US$ 99.95

	The information in this book consists of basic to core competencies that a person must possess to assemble electronic products, prepare printed circuit boards (PCB) modules and to install and service consumer and industrial electronic products and systems.

SF05-456	Ice Plant Refrigeration Servicing: Advanced (Book With DVD) (Workbook Included)
	/ 9789351158608/ Price:US$ 99.95

	The information in this book consists of basic to core competencies that a person must achieve to enable him/her to install, troubleshoot, service and maintain Iceplant Refrigeration units and components. It includes recovery and recycling of refrigerant from the system. A person who has achieved this qualification is competent to be Iceplant Refrigeration Technician.

SF05-456	Instrumentation and Control Servicing: Intermediate (Book With DVD) (Workbook Included)
	/ 9789351158615/ Price:US$ 99.95

	The information in this book consists of basic to core competencies that a person must possess to enable him/her to startup, commission, diagnose and troubleshoot instrumentation & control devices and systems, as well as microcomputer hardware, operating systems, common user applications, network systems, and various common peripherals in a manufacturing or processing environment.

SF05-456	Instrumentation and Control Servicing: Advanced (Book With DVD) (Workbook Included)
	/ 9789351158622/ Price:US$ 99.95

	The information in this book consists of competencies that a person must possess to enable him/her to loop check, maintain, and repair various instrumentation & control devices and systems, as well as microcomputer hardware, operating systems, common user applications, network systems, and various common peripherals in a manufacturing or processing environment.

SF05-456	Instrumentation and Control Servicing: Expert (Book With DVD) (Workbook Included)
	/ 9789351158639/ Price:US$ 99.95

	The information in this book consists of basic to core competencies that a person must possess to enable him/her to startup, commission, diagnose and troubleshoot instrumentation & control devices and systems, as well as microcomputer hardware, operating systems, common user applications, network systems, and various common peripherals in a manufacturing or processing environment.

VF05-62	Operation, Construction, and Functionality of Direct Current Machines.
	Amin, Muhammad/ 9781466684416/ Price:US$ 200.00

	Direct current machines are a quickly evolving domain whose applications affect many aspects of modern life from computers and printers to toys, electric vehicles, and traction applications. As their many uses continue to grow, it has become apparent that understanding these machines is the key to understanding our future. Operation, Construction, and Functionality of Direct Current Machines brings together many concepts, from the most basic working principles and construction of DC machines to more advanced topics such as electro-magnetism, armature reaction, parallel operations, and many more. Highlighting theoretical concepts and numerical problems, this book is an essential reference source for students, educators, and anyone interested in the field of electric machines. Topics Covered ‧Armature Reaction ‧Armature Windings ‧Characteristics of DC Generators ‧Commutation ‧DC Motor Functionality ‧Electromagnetism ‧Parallel Operation of DC Generators ‧Performance of DC Machines ‧Types of DC Generators

VF05-61	Performance Optimization Techniques in Analog, Mixed-Signal, and Radio-Frequency Circuit Design.
	Fakhfakh, Mourad/ 9781466666276/ Price:US$ 235.00

	Improving the performance of existing technologies has always been a focal practice in the development of computational systems. However, as circuitry is becoming more complex, conventional techniques are becoming outdated and new research methodologies are being implemented by designers. Performance Optimization Techniques in Analog, Mix-Signal, and Radio-Frequency Circuit Design features recent advances in the engineering of integrated systems with prominence placed on methods for maximizing the functionality of these systems. This book emphasizes prospective trends in the field and is an essential reference source for researchers, practitioners, engineers, and technology designers interested in emerging research and techniques in the performance optimization of different circuit designs. Topics Covered ‧Circuit Design ‧Electromagnetic Optimization ‧Evolutionary Algorithms ‧Hybrid Techniques ‧Metaheuristics ‧Optimization Practices ‧Simulation-Based Methodologies ‧Swarm Intelligence

SF05-518	Digital Control System Analysis and Design
	Charles L. Phillips/ 9780132938310/ Price:US$ 239.99



SF05-490	Standard Specification for Lead-Coated and Lead-Alloy-Coated Soft Copper Wire for Electrical Purposes
	/ B0189-05R15/ Price:US$ 63.21



	Electromagnetic Nondestructive Evaluation (XVIII).
	Chen, Z./ 9781614995081/ Price:EUR 135.00

	This book presents one plenary lecture and 41 selected papers from the 19th International Workshop on Electromagnetic Nondestructive Evaluation, held in Xi’an, China, in June 2014. The workshop focused on research into the theory and application of ENDE methods, and provided a forum for the exchange of ideas and discussion of recent developments. The papers are arranged in five sections: material characterization; analytical and numerical modeling; inverse problems and signal processing; new developments and innovative industrial applications; and advanced sensors in ENDE.

SF05-490	Standard Specification for Tin-Coated Soft or Annealed Copper Wire for Electrical Purposes
	/ B0033-10R14/ Price:US$ 63.21



SF05-463	A Course in Lens Design.
	Velzel, Chris/ 9789401786843/ Price:EUR 139.99



SF05-435	The Design of High Performance Mechatronics: High-Tech Functionality by Multidisciplinary System Integration.
	Schmidt, R. M./ 9781614993674/ Price:EUR 135.00

	Since they entered our world around the middle of the 20th century, the application of mechatronics has enhanced our lives with functionality based on the integration of electronics, control systems and electric drives. This book deals with the special class of mechatronics that has enabled the exceptional levels of accuracy and speed of high-tech equipment applied in the semiconductor industry, realising the continuous shrink in detailing of micro-electronics and MEMS. As well as the more frequently presented standard subjects of dynamics, motion control, electronics and electromechanics, this book includes an overview of systems engineering, optics and precision measurement systems, in an attempt to establish a connection between these fields under one umbrella.

	Electromagnetic Nondestructive Evaluation (XVI)
	Rebello, J.M./ 9781614993537/ Price:EUR 125.00



	Thermomechanics of Elastoplastic Deformation.
	Markin, A. A./ 9781907343155/ Price:GBP 85.00

	n this monograph the authors used the thermo-mechanical approach to focus on processes of reversible and irreversible equilibrium deformation of isotropic and anisotropic solids. The presented models can be generalized for the case of finite deformations in the construction of images in spaces of nonholonomic measures. Formulation of associated boundary value problems of solid mechanics in variational form, the issues of non-uniqueness and stability of finite deformation processes are also discussed.

	Correlated Photons and Their Applications.
	Samartsev, Vitaly V./ 9781907343445/ Price:GBP 45.00

	The book deals with correlated photons in quantum optics, the methods of producing them and a number of applications in biphoton spectroscopy and polarisation, graphics of the biphoton field. In the majority of the experiments described in the book, the correlated pairs of the photons (by photons) were produced in the process of spontaneous parametric scattering of light.

	Electromagnetic Nondestructive Evaluation. (XVII)
	Capova, Klara/ 9781614994060/ Price:EUR 140.00

	This book presents selected papers from the 18th International Workshop on Electromagnetic Non-destructive Evaluation (ENDE), which was held in Bratislava, Slovak Republic, on June 25-28, 2013. The aim of the workshop was to provide an international forum for the discussion of the state-of-the-art and perspectives in the field from the view of science, technology and engineering. The book is divided into five main sections: advanced sensors; analytical and numerical modeling and biomedical applications; innovative industrial applications; new developments; and, solutions of inverse problems. Containing 40 peer-reviewed papers, it will be of interest to all those whose work involves electromagnetic non-destructive evaluation, whatever their discipline.

	Quantum Mechanics.
	Thankappan, V. K./ 9781781830147/ Price:GBP 45.00

	Unlike most books on the subject, no detailed account of the historical development of quantum mechanics is included. Instead, the emphasis is on the basic principles, the calculational techniques and the inner consistency and beauty of the theory. For this, a Hilbert space formulation of the basic principles and the equations of motion are adopted at the outset. The treatment of linear vector spaces, matrices, angular momentum, relativistic wave equations, quantum field theory and the interpretational problem, is given in a more detailed way than in most books on quantum mechanics. Topics covered include Clebsch-Gordon and Racah coefficients, 9-jsymbols and spherical tensors, the Klein–Gordon and the Weyl equations, Feynman's path–integral formalism, Feynman diagrams, Normal Products and Wick's Theorem, the EPR paradox, Hidden–variables theories and Bell's inequality. A number of problems are included with a view to supplementing the text. The present edition includes boundary value problems, representation theory, Fermi–Gas Model of the nuclei, Imaginary–mass Klein–Gordon equation, covariant and contravariant vectors, explanations of the EPR paradox and Einstein's concept of locality versus determinism.

	Engineering Electromagnetics.
	Wadhwa, C. L./ 9781848290785/ Price:GBP 37.50

	Engineering Electromagnetics is an outstanding new textbook for students of electrical engineering, electronics, and communication engineering. Electromagnetic theory is a very important component of such courses, as it has a wide variety of applications in wireless technology, which are relevant to all aspects of electrical engineering worldwide. The book consists of 12 chapters, each with applied examples, problems and solutions: Professor Wadhwa is both an outstanding academic and a proven successful author of international repute. His various books on aspects of electrical engineering are used on courses worldwide.

VF05-59	Advanced Instrument Engineering: Measurement, Calibration, and Design.
	Aime Lay-Ekuakille/ 9781466641655/ Price:US$ 195.00

	Measurement technologies and instrumentation have a multidisciplinary impact in the field of applied sciences. These engineering technologies are necessary in processing information required for renewable energy, biotechnology, power quality, and nanotechnology. Advanced Instrument Engineering: Measurement, Calibration, and Design presents theoretical and practical aspects on the activities concerning measurement technologies and instrumentation. This wide range of new ideas in the field of measurements and instrumentation is useful to researchers, scientists, practitioners, and technicians for their area of expertise. Topics Covered ‧Analog and Digital Systems ‧Bioelectrics ‧Instrumentation ‧Measurement Technologies ‧Nanocomposite Materials ‧Standardization ‧Wireless Sensor Networks

VF05-58	Magnetoelastic Sensors: Theory, Instrumentation and Applications.
	Grimes, Craig A./ 9781588832535/ Price:US$ 399.00

	Magnetoelastic Sensors: Theory, Instrumentation and Applications is an invaluable resource that provides the reader with a complete description of the operational physics, a compendium of sensor monitoring techniques with details on associated electronic instrumentation for sensor analysis, and a wide survey of physical, chemical, and biological monitoring applications to which the remarkable magnetism-based remote-query (wireless, passive) sensor technology has been applied. CHAPTERS ‧An introduction to Magnetoelastic Materials and Sensor Applications ‧Remote Query Magnetoelastic Resonance Sensors ‧The Physics of Magnetoelastic Sensor Operation ‧Electronic Implementations for Characterizing Magnetoelastic Sensors ‧Liquid Property Measurements Using Magnetoelastic Sensors ‧Measurement of Physical Parameters Using Magnetoelastic Sensors ‧Analysis of the Hemostatic (Haemostatic) System Using Magnetoelastic Sensors ‧Magnetoelastic Chemical Sensors ‧Magnetoelastic Biosensors ‧The Harmonic Response of Magnetoelastic Sensors

SF05-474	Optimal and Robust Scheduling for Networked Control Systems
	Stefano Longo/ 9781138074828/ Price:GBP 68.99



SF05-438	Understanding Automotive Electronics.
	Ribbens, William/ 9780080970974/ Price:US$ 99.95



SF05-431	Matlab for Control System Engineers.
	Dukkipati, Rao V./ 9781781830062/ Price:GBP 50.00

	MATLAB for Control System Engineers is designed as an introductory undergraduate or graduate course for science and engineering students of all disciplines. Control systems engineering is a multidisciplinary subject and presents a control engineering methodology based on mathematical fundamentals and stresses physical system modeling. The classical methods of control systems engineering are covered here using MATLAB software: matrix analysis, Laplace transforms and transfer functions, root locus analysis and design, frequency response methods of analysis including Bode, Nyquist, and Nichols, second order systems approximations, phase and gain margin and bandwidth, and state space variable method. Presentations are limited to linear, time-invariant continuous systems.

	Control System Analysis and Design
	Tripathi, A.K./ 9781906574895/ Price:GBP 50.00

	This book presents a comprehensive, easily accessible and in-depth introduction to the views of Control System Analysis and Design paving a straight forward way for future engineers to step into modern technological developments. The text material is well designed for undergraduate students pursuing courses in Electronics and Electrical Engineering. This book should, perhaps, be an ultimate book for competitive examinations. The book style should also prove potentially useful to engineers and other professionals wishing to update their knowledge through self-study.

VF05-9-5	Handbook of Optical Systems, Volume 5: Metrology of Optical Components and Systems.
	Gross, Herbert/ 9783527403813/ Price:US$ 395.00

	Optical systems have a wide range of technical applications (e.g. viewing devices, lens systems) and uses in industrial manufacturing. And while the design of optical systems requires a high level of expertise, there is, to date, no resource available, which allows beginners to learn optical design. This state-of-the-art handbook, written by reputed industrial experts, provides a comprehensive introduction to designing optical systems, combining for the first time theoretical aspects of optical modeling with applications of practical optical design. With more than 3,000 full-colored illustrations and images, here is an essential reference for the optical industry as well as universities of applied sciences.

VF05-57	Swarm Intelligence for Electric and Electronic Engineering.
	Fornarelli, Girolamo/ 9781466626669/ Price:US$ 195.00

	With growing developments in artificial intelligence and focus on swarm behaviors; algorithms have been utilized in solving a variety of problems in the field of engineering. This approach has been specifically suited to face the challenges in electric and electronic engineering. Swarm Intelligence for Electric and Electronic Engineering provides an exchange of knowledge on the advances, discoveries, and improvements of swarm intelligence in electric and electronic engineering. This comprehensive collection aims to bring together new swarm-based algorithms as well as approaches to complex problems and various real-world applications. Topics Covered ‧Bio-inspired Hardware and Networks ‧Circuit, Filter and network synthesis ‧Decision making and Control in industrial environment ‧Diagnosis in industrial processes ‧Pattern recognition and signal processing ‧Power systems ‧Sensor networks ‧Telecommunications systems

VF05-56	Electromagnetic Transients in Transformer and Rotating Machine Windings.
	Su, Charles Q./ 9781466619210/ Price:US$ 195.00

	Electromagnetic transient phenomena in transformers and rotating machines are complicated by their winding structures, with transient phenomena caused by either external events such as lightning, or by internal events such as switching operations and faults. Electromagnetic Transients in Transformer and Rotating Machine Windings explores relevant theoretical frameworks, the latest empirical research findings, and industry-approved techniques in this area. Written for professionals who want to improve their understanding of the electromagnetic transient phenomena in transformer and rotating machines windings, this research volume is also useful for university research students in power system protection, insulation condition monitoring, and incipient fault diagnosis. Topics Covered ‧ Transmission Line and Capacitive Ladder Networks ‧ Single Layer Transformer Windings ‧ Transformer and Generator Stator Windings ‧ Z-transform Transformer and Generator Models ‧ Partial Discharge Detection ‧ Electromagnetic Transient Phenomena ‧ Lightning protection of substations ‧ Detection of transformer faults ‧ Impulse voltage distribution ‧ Ferro-resonance

VF05-55	Handbook of Research on Solar Energy Systems and Technologies.
	Anwar, Sohail/ 9781466619968/ Price:US$ 270.00

	The last ten years have seen rapid advances in nanoscience and nanotechnology, allowing unprecedented manipulation of the nanoscale structures controlling solar capture, conversion, and storage. Filled with cutting-edge solar energy research and reference materials, the Handbook of Research on Solar Energy Systems and Technologies serves as a one-stop resource for the latest information regarding different topical areas within solar energy. This handbook will emphasize the application of nanotechnology innovations to solar energy technologies, explore current and future developments in third generation solar cells, and provide a detailed economic analysis of solar energy applications. Topics Covered ‧ Economics ‧ Hybrid Thermo – Photovoltaic Energy Conversion ‧ Nanostructures for Solar Energy Conversion ‧ Photovoltaic devices ‧ Photovoltaic Modules and Systems ‧ Reliability and Testing Standards ‧ Solar Cells ‧ Solar Energy Conversion Materials ‧ Solar Energy Storage ‧ Solar Thermal Systems

VF05-54	Cognitive Radio and Interference Management: Technology and Strategy.
	Ku, Meng-Lin/ 9781466620056/ Price:US$ 190.00

	Broadcast spectrum is scarce, both in terms of our ability to access existing spectrum and as a result of access rules created by governments. An emerging paradigm called cognitive radio, however, has the potential to allow different systems to dynamically access and opportunistically exploit the same frequency band in an efficient way, thereby allowing broadcasters to use spectrum more efficiently. Cognitive Radio and Interference Management: Technology and Strategy brings together state-of-the-art research results on cognitive radio and interference management from both theoretical and practical perspectives. It serves as a bridge between people who are working to develop theoretical and practical research in cognitive radio and interference management, and therefore facilitate the future development of cognitive radio and its applications. Topics Covered ‧ Cognitive Radio Architectures and Models ‧ Collaborative Relays ‧ Competitive Heterogeneous Networks ‧ Dynamic Network Architecture ‧ Information Theory for Cognitive Radio ‧ Interference Management Strategies ‧ IP Mobility Management ‧ Opportunistic Spectrum Sensing and Transmissions ‧ Spectrum Sensing and Access ‧ Theoretical Performance Analysis

VF05-53	Security and Trends in Wireless Identification and Sensing Platform Tags: Advancements in RFID.
	Lopez, Pedro Peris/ 9781466619906/ Price:US$ 190.00

	Radio Frequency Identification (RFID) technology may become one of the most pervasive technologies of the near future. Yet the widespread adoption of this new technology presents security risks that have not been sufficiently addressed. Security and Trends in Wireless Identification and Sensing Platform Tags: Advancements in RFID highlights new research regarding wireless identification and sensing platform (WISP) tags, security, and applications. It serves as a reference on WISP technology and presents recent advances in this field. This volume serves as a useful reference for security experts, will introduce RFID professionals to new trends in this area, and can also be used by IT experts looking to utilize this technology. Topics Covered ‧ Cryptographic primitives ‧ Design and analysis of protocols ‧ Information and Security Ethics ‧ Lightweight Cryptopgraphy ‧ Monitoring Technologies ‧ RFID Devices ‧ RFID protocols for sensor data ‧ Security in EPC Class-1 Generation-2 ‧ Sensors ‧ Wireless Identification and Sensing Platforms (WISP)

VF05-52	Railway Safety, Reliability and Security: Technologies and Systems Engineering.
	Flammini, Francesco/ 9781466616431/ Price:US$ 195.00

	Human errors, as well as deliberate sabotage, pose a considerable danger to passengers riding on the modern railways and have created disastrous consequences. To protect civilians against both intentional and unintentional threats, rail transportation has become increasingly automated. Railway Safety, Reliability, and Security: Technologies and Systems Engineering provides engineering students and professionals with a collection of state-of-the-art methodological and technological notions to support the development and certification of ‘real-time safety-critical’ railway control systems, as well as the protection of rail transportation infrastructures. Topics Covered ‧Automatic Train Operation (ATO) ‧Railway Interoperability ‧Driverless systems ‧Innovative Railway Control and Monitoring Systems ‧High-Assurance Systems Engineering ‧Risk Assessment and Hazard Analysis ‧Protocols for Real-Time Distributed Systems ‧Human Machine Interaction and Human Factors ‧Formal Methods in Software Development ‧Computer Dependability

VF05-51	Chipless and Conventional Radio Frequency Identification: Systems for Ubiquitous Tagging.
	Karmakar, Nemai Chandra/ 9781466616165/ Price:US$ 185.00

	Radio Frequency Identification (RFID) is a wireless tracking and data capturing technique for automatic identification, tracking, security surveillance, logistics, and supply chain management. RFID tags, which have been successfully employed in many industries including retail and healthcare, have provided a multitude of benefits but also currently remain very costly. Chipless and Conventional Radio Frequency Identification: Systems for Ubiquitous Tagging explores the use of conventional RFID technology as well as chipless RFID technology, which provides a cheaper method of implementation, opening many doors for a variety of applications and industries. This practical reference, designed for researchers and practitioners, investigates the growing field of RFID and its promising future. Topics Covered ‧ Anti-collision protocol ‧ Chipless RFID tags ‧ Current uses and successes of RFID ‧ Detection of RFID tags ‧ Middleware related to RFID ‧ New and future applications of RFID tags ‧ RFID antennas and amplifiers ‧ RFID reader system ‧ Security of RFID ‧ Wireless sensor network related to RFID

VF05-50	Nonvolatile Memories: Materials, Devices and Applications, 2-Vols/Set.
	Tseng, Tseung-Yuen/ 9781588832498/ Price:US$ 695.00

	Nonvolatile semiconductor memory (NVSM) is one of the most important discoveries in the field of electron devices since the invention of the transistor. Invented by D. Kahng and S.M. Sze in 1967, NVSM, today, is the largest electronic industry in the world. This single invention has subsequently given rise to a large family of memory devices including flash memory and electrically erasable programmable read-only memory (EEPROM). All modern electronic devices, like mobile phones, notebook computers, digital cameras, MP3 music players, personal digital assistants, digital televisions, automotive engine control units, portable medical diagnostic systems, USB flash personal discs, and global positioning systems, are all based on NVSM. In the past 20 years, NVSM's minimum feature length has been scaled down from 0.8 ?m to sub-20 nm-a 40-fold reduction. Many alternative NVSM technologies are being developed to reduce the size (sub-10 nm) and improve device performance. Nonvolatile Memories is a two-volume book containing 32 state-of-the-art chapters written by 71 world-leading experts on nonvolatile memories. It includes comprehensive coverage of the physics, material science, device engineering, and applications of nonvolatile memory devices. The book summarizes the most recent advances and future trends in the field of nonvolatile semiconductor memory. This book is intended as a reference book for engineers and scientists actively involved in semiconductor device research and development. It also serves as a textbook for senior undergraduate and graduate students in applied physics, materials science and engineering, electrical and electronics engineering, who have already acquired a basic understanding of semiconductor device physics.

VF05-49	Power System Planning Technologies and Applications: Concepts, Solutions and Management.
	Elkarmi, Fawwaz/ 9781466601734/ Price:US$ 195.00

	Planning is an important function of the management of any business, providing knowledge of future prospects and enabling prudent and appropriate decision-making. Planning is especially critical for power systems, since electricity is a fundamental part of modern societies and many conventional electrical energy resources currently in use are limited. Power System Planning Technologies and Applications: Concepts, Solutions and Management focuses on the technical planning of power systems, taking into account technological evolutions in equipment as well as the economic, financial, and societal factors that drive supply and demand and have implications for technical planning at the micro level. With this book, researchers, practicing engineers, regulators, policy makers, and investors will have a better understanding of the intricacies of power system planning and, therefore, improve their decisions about the future. Topics Covered ‧ Demand Side Management ‧ Energy Efficiency ‧ Generation Expansion ‧ Integrated Resource Planning ‧ Investment Analysis ‧ Load Information and trends ‧ Principles of Load Forecasting ‧ Regulatory and Market Constraints ‧ Renewable Energy Technologies ‧ Transmission Expansion

VF05-48	Wireless Radio-Frequency Standards and System Design: Advanced Techniques.
	Cornetta, Gianluca/ 9781466600836/ Price:US$ 195.00

	Radio-frequency (RF) integrated circuits in CMOS technology are gaining increasing popularity in the commercial world, and CMOS technology has become the dominant technology for applications such as GPS receivers, GSM cellular transceivers, wireless LAN, and wireless short-range personal area networks based on IEEE 802.15.1 (Bluetooth) or IEEE 802.15.4 (ZigBee) standards. Furthermore, the increasing interest in wireless technologies and the widespread of wireless communications has prompted an ever increasing demand for radio frequency transceivers. Wireless Radio-Frequency Standards and System Design: Advanced Techniques provides perspectives on radio-frequency circuit and systems design, covering recent topics and developments in the RF area. Exploring topics such as LNA linearization, behavioral modeling and co-simulation of analog and mixed-signal complex blocks for RF applications, integrated passive devices for RF-ICs and baseband design techniques and wireless standards, this is a comprehensive reference for students as well as practicing professionals. Topics Covered ‧ CMOS Nanometer Technologies ‧ EM/Circuit Co-Simulation ‧ Frequency Synchronization ‧ Frequency Synthesizer ‧ Intra Vehicle Communications ‧ Linearity in RF Circuits ‧ Multi-Mode Multi-Standard Transceivers ‧ RF-MEMS ‧ WiMAX ‧ Wireless Transceivers

VF05-47	Wireless Multi-Access Environments and Quality of Service Provisioning: Solutions and Application.
	Muntean, Gabriel-Miro/ 9781466600171/ Price:US$ 190.00

	Wireless technology has expanded rapidly as a field over recent years, especially in mobile and distance technologies, and collaboration over networks demands increases in speed, security, and reliability. Wireless Multi-Access Environments and Quality of Service Provisioning: Solutions and Application serves as a vital resource for practitioners to learn about the latest research and methodology within the field of wireless technology. This book covers important aspects of emerging technologies in the heterogeneous next generation network environment with focus on wireless communications and their quality. It presents network selection mechanisms, handover solutions and adaptive techniques, and identifies the research issues and challenges and presents a survey of the proposed solutions in the literature. It includes important chapters written by researchers from prestigious laboratories from Australia, China, Mexico, Portugal, Greece, Germany, the United Kingdom, and India, presenting the current advancements in wireless communications. Topics Covered 1. Cross-Layer Optimization 2. Handover Strategies 3. Interoperability 4. Management 5. Mobility Challenges 6. Multimedia Content Distribution 7. Network Layer Approaches 8. Network Selection Solutions 9. Security 10 .Wireless Aware Transport Protocols

VF05-45	Handbook of Nanoscopy, 2-Vols/Set.
	Tendeloo, Gustaaf van/ 9783527317066/ Price:US$ 505.00

	This completely revised successor to the Handbook of Microscopy supplies in-depth coverage of all imaging technologies from the optical to the electron and scanning techniques. Adopting a twofold approach, the book firstly presents the various technologies as such, before going on to cover the materials class by class, analyzing how the different imaging methods can be successfully applied. It covers the latest developments in techniques, such as in-situ TEM, 3D imaging in TEM and SEM, as well as a broad range of material types, including metals, alloys, ceramics, polymers, semiconductors, minerals, quasicrystals, amorphous solids, among others. The volumes are divided between methods and applications, making this both a reliable reference and handbook for chemists, physicists, biologists, materials scientists and engineers, as well as graduate students and their lecturers.

SF05-483	Optical Admittance Loci Monitoring for Thin Film Deposition: Optical Monitoring for Thin Film Coatings
	Cheng-Chung Lee/ 9783659001987/ Price:EUR 59.00



SF05-421	Radio Frequency Identification System Security: RFIDsec'12 Asia Workshop Proceedings.
	Lo, Nai-Wei/ 9781614991427/ Price:EUR 90.00

	This book presents the proceedings of RFIDsec’12 Asia, the 2012 workshop on radio frequency identification (RFID) and the internet of things (IoT) Security held in Taipei, Taiwan, in November 2012. RFIDsec’12 Asia provides researchers, enterprises and governments with a platform to investigate, discuss and propose new solutions to security and privacy issues relating to RFID/IoT technologies and applications.

SF05-416	Advanced Power System Analysis and Dynamics.
	Singh, L. P./ 9781906574871/ Price:GBP 45.00

	This book is a result of teaching courses in the areas of Computer Methods in Power Systems, Digital Simulation of Power Systems, Power System Dynamics and Advanced Protective Relaying to undergraduate and graduate students in electrical engineering. The present edition includes a sub-section on solution procedure to include transmission losses using dynamic programming in the chapter on Economic Load Scheduling of Power System. In this edition an additional chapter on Load Forecasting has also been included. The present book deals with almost all the aspects of modern power system analysis such as network equations and its formulations, graph theory, symmetries inherent in power system components and its formulations, symmetries inherent in power system components and development of transformation matrices based solely upon symmetries, feasibility analysis and modelling of multi-phase systems, power system modelling including detailed analysis of synchronous machines, induction machines and composite loads, sparsity techniques, economic operation of power systems including derivation of transmission loss equation from the fundamental, solution of algebraic and differential equations and power system studies such as load flow, fault analysis and transient stability studies of a large scale power system including modern and related topics such as advanced protective relaying, digital protection and load forecasting. The book contains solved examples in these areas and also flow diagrams which will help on one hand to understand the theory and on the other hand, it will help the simulation of large scale power systems on the digital computer. The book will be easy to read and understand and will be useful to both undergraduate and graduate students in electrical engineering as well as to the engineers working in electricity boards and utilities etc.

SF05-413	Electromagnetic Nondestructive Evaluation (XV).
	Rao, B. P./ 9781607509677/ Price:EUR 125.00

	This book is a collection of 41 papers presented at the 16th International Workshop on Electromagnetic Nondestructive Evaluation (ENDE), which was held in Chennai, India, in March 2011. This is the first time this workshop series has come to India, a fact which is indicative of the growing interest in the Indian subcontinent for ENDE. Highlights of the workshop were the excellent keynote presentation by Professor Satish Udpa of Michigan State University, USA, which dealt with the origin, growth and future of ENDE, and the unique contest on ‘Electromagnetic Sensors and Devices’ which was organized for students and scholars in order to give them an early opportunity to interact with ENDE experts.

	Introduction to Plasma Dynamics.
	Morozov, A. I./ 9781904602873/ Price:GBP 125.00

	The hierarchy of basic models of classic nondense plasma is described. The models are used to examine main plasma systems, equilibrium configurations, linear and shock waves, stationary flows, elements of plasma chemistry and principles of plasma lasers. A number of cosmic objects is described: planetary vortices, Earth and Sun magnetospheres. Applied plasma dynamic systems are also discussed.

VF05-46	Innovation in Power, Control, and Optimization: Emerging Energy Technologies.
	Vasant, Pandian/ 9781613501382/ Price:US$ 195.00

	Developing a system that can cope with variations of system or control parameters, measurement uncertainty, and complex, multi-objective optimization criteria is a frequent problem in engineering systems design. The need for a priori knowledge and the inability to learn from past experience make the design of robust, adaptive, and stable systems a difficult task. Innovation in Power, Control, and Optimization: Emerging Energy Technologies unites research on the development of techniques and methodologies to improve the performance of power systems, energy planning and environments, controllers and robotics, operation research, and modern artificial computational intelligent techniques. Containing research on power engineering, control systems, and methods of optimization, this book is written for professionals who want to improve their understanding of strategic developments in the area of power, control, and optimization. Topics Covered ‧ Electric Distribution Networks ‧ Genetic Algorithms ‧ Intelligent Operation and Emergency Control of Power Systems ‧ Power Grid Analysis and Monitoring ‧ Power System Stability ‧ Renewable Energy ‧ Smart Grid Techniques for Optimized Energy Use ‧ Soft Computing and Computational Intelligence ‧ Wind Farms

VF05-43	Advances in Monolithic Microwave Integrated Circuits for Wireless Systems: Modeling and Design Technologies.
	Marzuki, Arjuna/ 9781605668864/ Price:US$ 195.00

	Monolithic Microwave Integrated Circuit (MMIC) is an electronic device that is widely used in all high frequency wireless systems. In developing MMIC as a product, understanding analysis and design techniques, modeling, measurement methodology, and current trends are essential. Advances in Monolithic Microwave Integrated Circuits for Wireless Systems: Modeling and Design Technologies is a central source of knowledge on MMIC development, containing research on theory, design, and practical approaches to integrated circuit devices. This book is of interest to researchers in industry and academia working in the areas of circuit design, integrated circuits, and RF and microwave, as well as anyone with an interest in monolithic wireless device development. Topics Covered ‧ LNA Invention ‧ Low Noise Amplifiers ‧ Millimeter Wave Integrated Circuit (MMWIC) ‧ Monolithic Microwave Integrated Circuits (MMICs) ‧ Multi-Standard LNA ‧ Power-Constrained Noise Optimization ‧ RC Feedback ‧ Reconfigurable LNA ‧ Simultaneous Noise and Input Matching ‧ WiMAX

VF05-42	Design and Test Technology for Dependable Systems-on-Chip.
	Ubar, Raimund/ 9781609602123/ Price:US$ 180.00

	Designing reliable and dependable embedded systems has become increasingly important as the failure of these systems in an automotive, aerospace or nuclear application can have serious consequences. Design and Test Technology for Dependable Systems-on-Chip covers aspects of system design and efficient modelling, and also introduces various fault models and fault mechanisms associated with digital circuits integrated into System on Chip (SoC), Multi-Processor System-on Chip (MPSoC) or Network on Chip (NoC). This book provides insight into refined "classical" design and test topics and solutions for IC test technology and fault-tolerant systems. Topics Covered ‧Built-in self repair for logic structures ‧Combined test-data compression and test planning ‧Diagnostic modeling of digital systems ‧Fault simulation and fault injection technology ‧Fault-tolerant and fail-safe design based on reconfiguration ‧Flexible fault-tolerant schedules for embedded systems ‧Memory testing and self-repair ‧Optimizing fault tolerance for multi-processor system-on-chip ‧Software-based self-test of embedded microprocessors ‧Transient faults detection and compensation

VF05-41	Comprehensive Semiconductor Science and Technology, 6-Vols/Set.
	Bhattacharya, Pallab/ 9780444531438/ Price:GBP 1500.00

	Key Features Provides a comprehensive global picture of the semiconductor world Each of the work's three sections presents a complete description of one aspect of the whole *Written and Edited by a truly international team of experts Description Semiconductors are at the heart of modern living. Almost everything we do, be it work, travel, communication, or entertainment, all depend on some feature of semiconductor technology. Comprehensive Semiconductor Science and Technology captures the breadth of this important field, and presents it in a single source to the large audience who study, make, and exploit semiconductors. Previous attempts at this achievement have been abbreviated, and have omitted important topics. Written and Edited by a truly international team of experts, this work delivers an objective yet cohesive global review of the semiconductor world. The work is divided into three sections. The first section is concerned with the fundamental physics of semiconductors, showing how the electronic features and the lattice dynamics change drastically when systems vary from bulk to a low-dimensional structure and further to a nanometer size. Throughout this section there is an emphasis on the full understanding of the underlying physics. The second section deals largely with the transformation of the conceptual framework of solid state physics into devices and systems which require the growth of extremely high purity, nearly defect-free bulk and epitaxial materials. The last section is devoted to exploitation of the knowledge described in the previous sections to highlight the spectrum of devices we see all around us.

VF05-40	Adoption, Usage, and Global Impact of Broadband Technologies: Diffusion, Practice and Policy.
	Dwivedi, Yogesh K./ 9781609600112/ Price:US$ 180.00

	Broadband internet has the potential to profoundly impact science, business and society, while simultaneously transforming almost every aspect of everyday life. Because of broadband’s increasingly prominent role and presence, it is both appropriate and timely to understand the deployment and adoption of broadband technologies worldwide. Adoption, Usage, and Global Impact of Broadband Technologies: Diffusion, Practice and Policy contains a masterful synthesis of literature intended to enhance knowledge of broadband deployment, diffusion, adoption, usage and impact from the global perspective. Including chapters from researchers with varied geographical, educational and cultural backgrounds, this book helps the reader to understand the differences in the adoption of broadband in different countries and examine comparative policy issues at national and international levels. Topics Covered European Research and Education Networks The FCC’s National Broadband Plan Evolution in Broadband Technology Broadband diffusion on VoD and TV markets Consumer Usage of Broadband Internet Services Social Network Websites as a Marketing Platform Information Communication Technology (ICT) for Rural Women’s Life U.S. Rural-Urban Differences in Broadband Internet Adoption Strategies for Broadband Deployment Government Policy on Broadband Internet

SF05-417	9th IET International Conference on AC and DC Power Transmission 2010. (ACDC 2010)
	/ 9781617823794/ Price:US$ 155.00



SF05-411	Microwave and Radar Engineering.
	Sisodia, M. L./ 9781848290488/ Price:GBP 35.00

	This book has been written for students and professionals in electronics and communication engineering. Its contents cover the core requirements of microwave and radar engineering courses. The authors between them have over 60 years of teaching electronic and microwave technology, and their combined knowledge of the subject has produced an outstanding new text. They have taken special care in keeping a balance between the mathematical and the physical approach, and they have interspersed illustrations consistently throughout the book to help aid understanding. Also included are a number of solved problems taken from university exams which reinforce the key concepts of the subject

SF05-411	Electromagnetic Nondestructive Evaluation (XIV).
	Chady, Tomasz/ 9781607507499/ Price:EUR 135.00

	This book contains selected revised full papers from the 15th International Workshop on Electromagnetic Nondestructive Evaluation (ENDE), which was held in Szczecin, Poland, in June 2010. This annual workshop aims to bring together scientists researching various aspects of ENDE and engineers with experience of practical problems and industrial applications in the field. The 15th workshop attracted ninety nine participants from eleven European countries and from Algeria, Australia, Brazil, China, India, Japan, Korea and the United States. They reflect this aim, as well as the importance of the event as an opportunity for an international exchange of information and ideas. Among the subjects covered in this volume are: using magnetic Barkhausen measurements; pipe wall thickness inspection with the current driven thermal method; computational methods in ENDE; features of the electric conductivity around a stress corrosion crack and estimating case hardening depths.

SF05-411	The Design of High Performance Mechatronics: High-Tech Functionality by Multidisciplinary System Integration.
	Schmidt, Robert Munning/ 9781607508250/ Price:EUR 135.00

	Since they entered our world around the middle of the 20th century, the application of mechatronics has enhanced our lives with functionality based on the integration of electronics, control systems and electric drives. This book deals with the special class of mechatronics that has enabled the exceptional levels of accuracy and speed of high-tech equipment applied in the semiconductor industry, realising the continuous shrink in detailing of micro-electronics and MEMS. As well as the more frequently presented standard subjects of dynamics, motion control, electronics and electromechanics, this book includes an overview of systems engineering, optics and precision measurement systems, in an attempt to establish a connection between these fields under one umbrella.

SF05-406	Extra High Voltage AC Transmission Engineering.
	Begamudre, Rakosh D./ 9781906574741/ Price:GBP 50.00

	The book covers all topics that are considered essential for understanding the operation and design of EHV, AC overhead lines and underground cables. Theoretical analyses of all problems combined with practical application are presented in detail. EHV laboratory equipment and testing are fully covered together with application of digital recorders, fibre optics, etc. for impulse measurements. Every chapter contains many worked examples in order to illustrate and reinforce the theory. All examples are taken from practical situations as far as possible.

SF05-406	HVDC Power Transmission Systems.
	Padiyar, K. R./ 9781906574772/ Price:GBP 35.00

	The application of HVDC technology has received new impetus with the evacuation of large quantum of power from remote hydro and thermal stations. In addition, the controllability of power flows in the power grid has added a new dimension to the use of HVDC links in the context of developing Smart Grids. The power transfer from off-shore wind generation is another new application. DC transmission at distribution level voltages (using VSC-HVDC) is also being considered for integration of distributed generation in the power grid. This edition is a complete revision of the first edition taking into account the developments that have taken place since the first edition was published. In particular, the emerging technology of VSC-HVDC links is described in detail. Instead of adding new chapters to present the new developments, the new material is added at the appropriate places. For example, the analysis of VSC is presented in chapters 2 and 3 along with the thyristor based Line Commutated Converters (LCC). Practically, in all chapters, there is discussion of VSC-HVDC. The book also presents other developments such as the application of hybrid active filters, capacitor commutated converters, double and triple tuned filters etc. Chapter 10 presents power flow analysis in AC-DC systems based on a novel approach. The modeling, simulation and study of interactions among AC-DC systems is covered in the last 2 chapters without missing any relevant topics. The appendices give details of thyristor and IGBT valves, transient simulation of converters and DC lines, synchronous generator modeling, SSR analysis, CIGRE Benchmark models and design of DC and AC voltage controls in VSC-HVDC links. Several examples and case studies are included to illustrate the concepts. The book should be useful as text/reference to students, researchers and engineers from utilities/industries who wish to study and apply HVDC power transmission.

SF05-406	Power Systems Dynamics.
	Rau, V. G./ 9781906574840/ Price:GBP 25.00

	The book will be useful for those who are interested in Power Systems, Control Systems and Electrical Machines, especially Synchronous Machines. It provides comprehensive and indepth information on Dynamics and Transient Stability aspects. The book covers Power Systems Modeling, Application of Frequency Domain, Time Domain Techniques and Lyapunov Direct Method for Analysis of Dynamical Behavior of Power System subjected to small and large disturbances. In this book, application of techniques has been stressed rather than description of the theoretical basis of these techniques. Several illustrative examples have been presented wherever necessary.

SF05-406	Generation Distribution and Utilization of Electrical Energy.
	Wadhwa, C. L./ 9781906574765/ Price:GBP 45.00

	The book provides a clear, systematic and exhaustive exposition of various aspects of Generation Distribution and Utilization of Electrical Energy. The modern distribution network is spread over a large geographical area and hence the concept of distribution automation has been discussed so as to operate the system with a higher index of reliability and more economically. Various aspects of utilization viz. electric heating and welding, illumination engineering, and electrolytic processes have been discussed. Modern trends in electric traction, viz. the role of SCADA in electric traction and automation in electric traction have been discussed in great detail.

SF05-405	Process Control.
	Krishnaswamy, K./ 9781848290532/ Price:GBP 40.00

	This book has been designed as a textbook for the students of electronics and instrumentation engineering, instrumentation and control engineering, mechatronics engineering and chemical engineering courses. The first edition of the book covered mainly the mathematical modelling of various processes, controller characteristics and tuning, multi loop controls, final control element and selected unit operations. Due to popular demand and readership feedback, two more chapters, namely signal conditioning and digital controllers-computer- based control, have been added to this edition. The book is an outcome of the author’s vast hands-on experience in industry and his rich academic background. This new edition is an extremely useful text for students and faculty as well as a very good reference for practising process control professionals in industry.

SF05-405	Radio Frequency Identification System Security: RFIDsec'11 Asia Workshop Proceedings.
	Li, Tieyan/ 9781607507215/ Price:EUR 95.00

	his book, which forms part of the Cryptology and Information Security Series (CISS), presents the collected papers from the 2011 Workshop – ‘RFIDsec’11 Asia’ – on RFID security, co-hosted by Peking University and Penn State University in Wuxi, China, in April 2011. RFIDsec Asia is the Asian counterpart of the earlier RFID security workshop, RFIDsec, which was set up in 2005. It provides an Asia-based forum to address fundamental issues in theory and practice related to security and privacy issues, designs, standards and case studies in the development of radio frequency identification (RFID) systems, EPC global networks and the Internet of Things (IoT). The program of the 2011 workshop consists of one invited paper and a further nine papers, which were selected following a rigorous reviewing process by the Program Committee members and external reviewers. The papers cover many interesting topics in the realm of RFID security, including distance bounding and mutual authentication protocols, public key cryptography implementation and the Internet of Things.

SF05-392	Electricity Cost Modeling Calculations.
	Greer, Monica/ 9781856177269/ Price:US$ 135.00



VF05-39	Dynamic Reconfigurable Network-on-Chip Design: Innovations for Computational Processing and Communication.
	Shen, Jih-Sheng/ 9781615208074/ Price:US$ 180.00

	Reconfigurable computing brings immense flexibility to on-chip processing while network-on-chip has improved flexibility in on-chip communication. Integrating these two areas of research reaps the benefits of both and represents the promising future of multiprocessor systems-on-chip. Dynamic Reconfigurable Network-on-Chip Design: Innovations for Computational Processing and Communication is the one of the first compilations written to demonstrate this future for network -on-chip design. Through dynamic and creative research into questions ranging from integrating reconfigurable computing techniques, to task assigning, scheduling and arrival, to designing an operating system to take advantage of the computing and communication flexibilities brought about by run-time reconfiguration and network-on-chip, this book represents a complete source of the techniques and applications for reconfigurable network-on-chip necessary for understanding of future of this field. Topics Covered Administration of Reconfigurable NoCs Leveraging reconfiguration techniques Low-power network-on-chip Network-on-chip design flow NoC-based Infrastructures Operating system design Programming models for the processing elements Reconfigurable computing techniques Reconfiguring the Network-on-Chip processing elements Task scheduling

VF05-38	Nanotechnology and Microelectronics: Global Diffusion, Economics and Policy.
	Ekekwe, Ndubuisi/ 9781616920067/ Price:US$ 180.00

	Modern technology has positioned us in the midst of a new revolution. Together, nanotechnology and microelectronics are the engines of modern commerce, and are directly or indirectly enabling numerous innovative global changes. Whenever there is advancement in their performances, a dawn emerges in the global economy bringing improvements in all areas of human endeavors. Nanotechnology and Microelectronics: Global Diffusion, Economics and Policy provides comprehensive research and case studies on the issues surrounding technology transfer and diffusion, trends and developments, and economics and policies as they relate to these technologies. This book serves as a resource for academics, students, policy-makers and professionals interested in advancing their knowledge of nanotechnology and microelectronics. Topics Covered Global transfer, adoption and diffusion of nanotechnology and microelectronics Nanotechnology and microelectronics: impacts, trends, benefits, relevance and policies Infrastructures (education, research and industry) as they relate to these technologies Legislative frameworks and legal issues on these technological diffusion Environment and climate issues on diffusion of these technologies Emerging diffusion paradigm on nanotechnology and microelectronics Virtual education, collaboration and technology flow from developed nations Technology clusters and incubation centers Sustainability of programs in developing and emerging nations Roles and national technology policies as they pertain to adoption and diffusion

VF05-37	Movement-Aware Applications for Sustainable Mobility: Technologies and Approaches.
	Wachowicz, Monica/ 9781615207695/ Price:US$ 180.00

	The ability to communicate with anyone at anytime, anywhere, necessitates a need to provide reliable, resilient, and sustainable applications to support the evolving uses of mobile technologies. Movement-Aware Applications for Sustainable Mobility: Technologies and Approaches focuses on the use of location sensing technology and its wider applicability in supporting sustainable mobility, and presents current research on developing innovative approaches for gathering, representing, storing and analyzing movement data sets being generated from location sensing technology. Offering a unique opportunity for learning about how different techniques are being used to develop new movement-aware applications, this reference work gives students, researchers and practitioners the opportunity to acquire new concepts in the production, awareness and use of sensors, data, and information products for supporting sustainable mobility.

VF05-35	Handheld Computing for Mobile Commerce: Applications, Concepts and Technologies.
	Hu, Wen-Chen/ 9781615207619/ Price:US$ 180.00

	With the advent of the World Wide Web, electronic commerce has revolutionized traditional commerce, boosting sales and facilitating exchanges of merchandise and information. The emergence of wireless and mobile networks has made possible the introduction of electronic commerce to a new application and research area: mobile commerce. Handheld Computing for Mobile Commerce: Applications, Concepts and Technologies offers 22 outstanding chapters from 71 world-renowned scholars and IT professionals covering themes such as handheld computing for mobile commerce, handheld computing research and technologies, wireless networks and handheld/mobile security, and handheld images and video. It includes research and development results of lasting significance in the theory, design, implementation, analysis, and application of handheld computing. This book is essential for IT students, researchers, and professionals seeking to better understand handheld devices and concepts, thereby producing more useful and effective handheld applications and products.

VF05-34	Handbook of Research on Developments and Trends in Wireless Sensor Networks: From Principle to Practice.
	Jin, Hai/ 9781615207015/ Price:US$ 265.00

	As wireless sensor networks (WSNs) appear in many promising applications by deployment over various geographical areas such as infrastructure protection, scientific exploration, military surveillance, and smart environments, it is essential for a resource to address their current advancements. The Handbook of Research on Developments and Trends in Wireless Sensor Networks: From Principle to Practice provides state-of-the-art research describing the progression, implementation, issues, and trends in the rapidly changing world of WSNs. This defining body of innovative findings features the latest developments and studies of wireless senor networks in order to encourage new breakthroughs in this exciting technology.

VF05-32	Handbook of Neutron Optics.
	Utsuro, Masahiko/ 9783527408856/ Price:US$ 293.25

	Written by authors with an international reputation, acknowledged expertise and teaching experience, this is the most up-to-date resource on the field. The text is clearly structured throughout so as to be readily accessible, and begins by looking at scattering of a scalar particle by one-dimensional systems. The second section deals with the scattering of neutrons with spin in one-dimensional potentials, while the third treats dynamical diffraction in three-dimensional periodic media. The final two sections conclude with incoherent and small angle scattering, and some problems of quantum mechanics. With its treatment of the theories, experiments and applications involved in neutron optics, this relevant reading for nuclear physicists and materials scientists alike.

SF05-482	Principles of Lithography
	Harry J. Levinson/ 9780819483249/ Price:US$ 102.00



SF05-463	Field Guide to Microscopy.
	Tkaczyk, Tomasz S./ 9780819472465/ Price:US$ 42.00



SF05-428	Handbook of Nanostructured Thin Films and Coatings, 3-Vols/Set.
	Zhang, Sam/ 9781420094350/ Price:GBP 300.00



SF05-399	Computer Field Models of Electromagnetic Devices.
	Wiak, Slawomir/ 9781607506034/ Price:EUR 170.00

	Computer Field Models of Electromagnetic Devices , volume 34 in the book series Studies in Applied Electromagnetics and Mechanics is devoted to modeling and simulation, control systems, testing, measurements, monitoring, diagnostics and advanced software methodology in application to electrical and electronic devices and mechatronic systems. Other areas emerging strongly as new topics, in particular computer engineering, software methodology, CAD techniques, artificial intelligence and material sciences are also discussed. The contributions selected for this monograph have been grouped in the following chapters: Advanced Computational Techniques, Recent Developments of Electromagnetic Devices, Special Applications - Computational Electromagnetics, Power Losses Computations and Computer Modeling of Isolations Systems. The first topic is devoted to fundamental and computational problems which appear in electromagnetics. The presented methods include analytical, numerical and hybrid methods. The second topic looks at how to improve the techniques of optimal design of electromagnetic devices. Special attention has been paid to the design of electrical machines, especially induction machines, PM machines, Micro DC reluctance machines and drives. The third topic concerns contributions with some applications of electromagnetic fields. The last topic focuses on the techniques of calculation of power losses in electrical machines. Computer Field Models of Electromagnetic Devices provides applied mathematicians, computer and software engineers, and electronic and electrical engineers with high-quality knowledge and the means to learn more about ideas and experiences ranging from fundamental developments of theory to practical industrial applications.

SF05-398	High Voltage Engineering.
	Wadhwa, C. L./ 9781906574727/ Price:GBP 30.00

	The book provides a clear, systematic and exhaustive exposition of various discussions of High Voltage Engineering. Generation of a.c., d.c. and impulse voltage for testing of electrical equipments as per standard specifications have been explained. High voltage testing of some of the electrical equipments e.g. insulators, cables, transformers as per standard specifications has been explained. Various methods of non-destructive testing which yield information regarding life expectancy and long-term stability or otherwise of the insulating materials have been discussed. The book takes a view of various types of transients in power systems and suggests classical and more modern statistical methods of co-ordinating the insulation requirements of the system.

SF05-398	Linear Integrated Circuits.
	Choudhury, D. R./ 9781906574710/ Price:GBP 30.00

	This book is designed primarily for courses in operational amplifiers and linear integrated circuits for Electrical, Electronics, Instrumentation, Computer Engineering and Applied Sciences students. The text has been written in a style to enable students to self study. Examples are provided throughout the book to help the students assimilate the material covered. The text is so designed that the teacher need not consult reference books. It offers fabrication technology for ICs, a wide array of opamp 741 applications, 555 timer, 565 PLL, linear voltage regulator ICs 78/79XX, 723, AD/DA converters, active filters using 741, switched capacitor filters and OTAs ,in a comprehensive manner.

SF05-395	Nanotechnology for Telecommunications.
	Anwar, Sohail/ 9781420053258/ Price:GBP 180.00



SF05-394	Trap Level Spectroscopy in Amorphous Semiconductors.
	Mikla, Victor I./ 9780123847157/ Price:US$ 165.00



SF05-393	Networks and Systems.
	Choudhury, D. R./ 9781906574246/ Price:GBP 60.00

	This book allows students to learn fundamental concepts in linear circuit analysis using a well-developed methodology that has been carefully refined through classroom use. Applying his many years of teaching experience, the author focuses the reader's attention on basic circuit concepts and modern analysis methods. The text includes detailed coverage of basics of different terminologies used in electric circuits, mesh and node equations, network analysis and network theorems, signals and its properties, graph theory and its application in circuit analysis, analogous systems, Fourier and Laplace transforms and their applications in circuit theory. Wide coverage of evolution integral, two-port networks, passive and active filters, state variable formulation of network problems and network synthesis have been made. Transient response and frequency domain analysis of network systems has also been discussed. The hall-mark feature of this text is that it helps the reader to gain a sound understanding on the basics of circuit theory.

SF05-391	Electromagnetic Nondestructive Evaluation (XIII).
	Knopp, J./ 9781607505532/ Price:EUR 125.00

	The 14th International Workshop on Electromagnetic Nondestructive Evaluation (ENDE) was held at the Crowne Plaza Hotel in Dayton, Ohio, USA in July 2009, where the ENDE activities in the Dayton area reflect the local aerospace industry. With 80 participants from over ten countries worldwide, this workshop provided an important opportunity for an international exchange of information and ideas. This book contains the proceedings of that workshop. From the 59 oral and poster presentations, 39 were submitted for publication. Of these, 37 peer-reviewed papers appear in this volume. These papers present the latest research in topics ranging from ENDE in nuclear power plants, eddy current testing and metal material characterization, to microwave and TeraHerz techniques, aging aircraft and the application of other electromagnetic nondestructive techniques.

SF05-387	Stallcup's Master Electrician's Study Guide, 2008 Edition.
	Stallcup, James G./ 9780763752576/ Price:US$ 111.95

	To pass your Master Electrician's exam, you'll need to demonstrate extensive electrical skill plus knowledge about the 2008 NEC?. Take the most practical approach to career advancement with Stallcup's? Master Electrician's Study Guide from respected author and trainer James G. Stallcup. Pass on the first try. Study where it counts!

SF05-383	Power System Protection and Communications.
	Kalam, Akhtar/ 9781906574260/ Price:GBP 45.00

	The restructuring of the electric utility industry has generated the need for a mechanism that can successfully coordinate the different entities in a power market, enabling them to communicate effectively and efficiently, and to perform optimally and reliably. Power System Protection and Communications is an important book to primarily address the fundamental issues on electrical protection which is essential in understanding the generation, transmission and distribution of electricity. There is always a need to provide education in the theory and practice of protection engineering, for engineers and technical personnel, because of its importance in design and operation of the power system. The definitions of the individual components of distributed functions are presented in detail, including the different possible allocation of sub-functions and functional elements in physical devices. Secondly, the book examines in detail the importance of communication between power systems-discussing relevant issues such as the protocols, middleware, communication architecture, information embedded power systems and fibre optic network infrastructure.

SF05-380	Viscosity of Nematic Liquid Crystals.
	Belyaev, V.V./ 9781904602088/ Price:GBP 70

	The book gives a systematic account of the hydrodynamic properties of anisotropic liquids (nematic liquid crystals) and describing methods for measuring the anisotropic viscosity and experimental dependence of the viscosity of nematic liquid crystals on all thermodynamic parameters, compared with empirical approaches developed earlier, molecule-statistical andmolecule-dynamic theories. The author offers a highly accurate calculation method for predicting the level of viscosity. The structure of modern liquid crystal materials for optoelectronic devices is analysed in detail from the standpoint of preparation of mixtures with optimum viscosity and flow rate.

	127th Audio Engineering Society Convention 2009
	/ 9781615677122/ Price:US$ 225.00



	128th Audio Engineering Society Convention 2010
	/ 9781617387739/ Price:US$ 275.00



	17th World Hydrogen Energy Conference 2008 (WHEC 2008)
	/ 9781615674541/ Price:US$ 195.00



	25th Canadian Wind Energy Association Annual Conference and Exhibition 2009 (CanWEA 2009)
	/ 9781615679010/ Price:US$ 195.00



	DesignCon 2010
	/ 9781617385469/ Price:US$ 250.00



	International Conference on Electrical Energy Storage Applications and Technologies 2009 (EESAT 2009)
	/ 9781617382987/ Price:US$ 150.00



	12th IFAC Symposium on Control in Transportation Systems 2009
	Chassiakos, A.G./ 9781615679911/ Price:US$ 175.00



	IFAC Workshop on Engine and Powertrain Control, Simulation and Modeling 2009
	/ 9781617380204/ Price:US$ 185.00



	8th IFAC International Conference on Manoeuvring and Control of Marine Craft 2009
	Donha, D.C./ 9781617380266/ Price:US$ 185.00



	24th International Battery, Hybrid and Fuel Cell Electric Vehicle Symposium & Exhibition 2009 (EVS 24)
	/ 9781615674558/ Price:US$ 245.00



	European Offshore Wind Conference & Exhibition 2009 (EOW 2009)
	/ 9781615677474/ Price:US$ 175.00



	European Wind Energy Conference & Exhibition 2009 (EWEC 2009)
	/ 9781615677467/ Price:US$ 350.00



	19th International Conference on Flexible Automation and Intelligent Manufacturing 2009 (FAIM 2009)
	Nabhani, F./ 9781615676279/ Price:US$ 175.00



	World Energy Engineering Congress 2009 (WEEC 2009)
	/ 9781615677351/ Price:US$ 195.00



	GLOBALCON Conference and Trade Show 2010
	/ 9781617385827/ Price:US$ 125.00



	13th International Battery Materials Recycling Seminar & Exhibit 2009
	/ 9781615676972/ Price:US$ 395.00



	International Conference and Exhibition Assessing the Applications, Technologies and Opportunities for Energy Harvesting and Storage 2009
	/ 9781617386640/ Price:US$ 695.00



	Illuminating Engineering Society of North America Annual Conference 2009
	/ 9781615676897/ Price:US$ 180.00



	Motor Sport Noise 2010
	/ 9781617384189/ Price:US$ 110.00



	8th European Conference on Noise Control 2009 (EURONOISE 2009)
	/ 9781615676804/ Price:US$ 325.00



	Noise in the Built Environment 2010
	/ 9781617385957/ Price:US$ 110.00



	25th Reproduced Sound Conference 2009
	/ 9781615676859/ Price:US$ 110.00



	2010 IEEE Symposium on 3D User Interfaces (3DUI 2010)
	Hacket, M./ 9781424468461/ Price:US$ 218.00



	2010 3DTV-Conference: The True Vision - Capture, Transmission and Display of 3D Video (3DTV-CON 2010)
	/ 9781424463770/ Price:US$ 222.00



	2010 IEEE International Conference on Acoustics, Speech and Signal Processing (ICASSP 2010)
	/ 9781424442959/ Price:US$ 1312.00



	2010 NASA/ESA Conference on Adaptive Hardware and Systems (AHS 2010)
	/ 9781424458875/ Price:US$ 242.00



	2010 IEEE 2nd International Advance Computing Conference (IACC 2010)
	/ 9781424447909/ Price:US$ 256.00



	2010 Indian Antenna Week: A Workshop on Advanced Antenna Technology
	/ 9781424479146/ Price:US$ 95.00



	2010 The 12th International Conference on Advanced Communication Technology (ICACT 2010)
	/ 9781424454273/ Price:US$ 558.00



	2010 11th IEEE International Workshop on Advanced Motion Control (AMC 2010)
	/ 9781424466689/ Price:US$ 312.00



	2010 International Symposium on Advanced Packaging Materials: Microtech (APM 2010)
	/ 9781424467563/ Price:US$ 196.00



	2010 Second International Conference on Advances in Multimedia (MMEDIA 2010)
	L. Boszormenyi/ 9781424472772/ Price:US$ 198.00



	2010 International Workshop on Antenna Technology (iWAT 2010)
	/ 9781424448838/ Price:US$ 290.00



	2010 Proceedings of the Fourth European Conference on Antennas and Propagation (EuCAP 2010)
	/ 9781424464319/ Price:US$ 974.00



	2010 IEEE 8th Symposium on Application Specific Processors (SASP 2010)
	/ 9781424479535/ Price:US$ 197.00



	2010 21st IEEE International Conference on Application-specific Systems Architectures and Processors (ASAP 2010)
	F. Charot/ 9781424469666/ Price:US$ 238.00



	2010 Twenty-Fifth Annual IEEE Applied Power Electronics Conference and Exposition (APEC 2010)
	/ 9781424447824/ Price:US$ 527.00



	2010 IEEE Symposium on Asynchronous Circuits and Systems (ASYNC 2010)
	/ 9781424468591/ Price:US$ 182.00



	2010 IEEE International Conference on Automation Quality and Testing Robotics (AQTR 2010)
	/ 9781424467242/ Price:US$ 407.00



	2010 Sixth International Conference on Autonomic and Autonomous Systems (ICAS 2010)
	Bauer, M./ 9781424459155/ Price:US$ 232.00



	Proceedings of the 2010 IEEE 36th Annual Northeast Bioengineering Conference (NEBEC 2010)
	/ 9781424468799/ Price:US$ 344.00



	2010 IEEE International Symposium on Broadband Multimedia Systems and Broadcasting (BMSB 2010)
	/ 9781424444618/ Price:US$ 290.00



	2010 IEEE-IAS/PCA 52nd Cement Industry Technical Conference
	/ 9781424464074/ Price:US$ 202.00



	Proceedings of 2010 IEEE International Symposium on Circuits and Systems (ISCAS 2010)
	/ 9781424453085/ Price:US$ 1137.00



	2010 10th IEEE/ACM International Conference on Cluster, Cloud and Grid Computing (CCGrid 2010)
	M. Parashar/ 9781424469871/ Price:US$ 280.00



	2010 International Symposium on Collaborative Technologies and Systems (CTS 2010)
	/ 9781424466191/ Price:US$ 258.00



	2010 Third International Conference on Communication Theory, Reliability, and Quality of Service (CTRQ 2010)
	E. Borcoci/ 9781424472734/ Price:US$ 205.00



	2010 Australian Communications Theory Workshop (AusCTW 2010)
	/ 9781424454327/ Price:US$ 200.00



	2010 IEEE International Conference on Communications Workshops (ICCW 2010)
	/ 9781424468249/ Price:US$ 252.00



	2010 4th International Symposium on Communications, Control and Signal Processing (ISCCSP 2010)
	/ 9781424462858/ Price:US$ 349.00



	2010 25th Biennial Symposium on Communications (QBSC 2010)
	/ 9781424457090/ Price:US$ 276.00



	2010 IEEE International Conference on Communications (ICC 2010)
	/ 9781424464029/ Price:US$ 1208.00



	2010 8th International Conference on Communications (COMM 2010)
	/ 9781424463602/ Price:US$ 272.00



	2010 National Conference On Communications (NCC 2010)
	Sivalingam, K./ 9781424463831/ Price:US$ 264.00



	2010 Complexity in Engineering (COMPENG 2010)
	/ 9781424459827/ Price:US$ 202.00



	2010 IEEE 25th Annual Conference on Computational Complexity (CCC 2010)
	/ 9781424472147/ Price:US$ 192.00



	2010 Proceedings IEEE INFOCOM
	/ 9781424458363/ Price:US$ 554.00



	2010 International Conference on Computing, Control and Industrial Engineering (CCIE 2010)
	/ 9781424467501/ Price:US$ 366.00



	2010 IEEE 14th International Symposium on Consumer Electronics (ISCE 2010)
	/ 9781424466719/ Price:US$ 238.00



	2010 Digest of Technical Papers International Conference on Consumer Electronics (ICCE 2010)
	/ 9781424443147/ Price:US$ 424.00



	2010 International Workshop on Content Based Multimedia Indexing (CBMI 2010)
	/ 9781424480289/ Price:US$ 211.00



	2010 8th IEEE International Conference on Control and Automation (ICCA 2010)
	/ 9781424451951/ Price:US$ 602.00



	2010 Chinese Control and Decision Conference (CCDC 2010)
	/ 9781424451814/ Price:US$ 1006.00



	Proceedings of the 2010 American Control Conference (ACC 2010)
	/ 9781424474264/ Price:US$ 1708.00



	2010 Eighth International Conference on Creating, Connecting and Collaborating through Computing (C5 2010)
	/ 9781424467792/ Price:US$ 95.00



	2010 European Dependable Computing Conference (EDCC 2010)
	/ 9781424465934/ Price:US$ 189.00



	2010 IEEE 13th International Symposium on Design and Diagnostics of Electronic Circuits & Systems (DDECS 2010)
	Kotasek, Z./ 9781424466122/ Price:US$ 247.00



	2010 47th ACM/IEEE Design Automation Conference (DAC 2010)
	/ 9781424466771/ Price:US$ 347.00



	2010 15th Asia and South Pacific Design Automation Conference (ASP-DAC 2010)
	/ 9781424457656/ Price:US$ 336.00



	2010 Symposium on Design Test Integration and Packaging of MEMS/MOEMS (DTIP 2010)
	Courtois, B./ 9781424466368/ Price:US$ 250.00



	2010 IEEE 30th International Conference on Distributed Computing Systems (ICDCS 2010)
	/ 9781424472611/ Price:US$ 243.00



	IEEE EDUCON 2010 Conference (EDUCON 2010)
	/ 9781424465682/ Price:US$ 479.00



	2010 International Conference on e-Education, e-Business, e-Management and e-Learning (IC4E 2010)
	/ 9781424456802/ Price:US$ 280.00



	2010 18th Iranian Conference on Electrical Engineering (ICEE 2010)
	Omidi, M.J./ 9781424467600/ Price:US$ 347.00



	2010 Asia-Pacific International Symposium on Electromagnetic Compatibility (APEMC 2010)
	/ 9781424456215/ Price:US$ 573.00



	2010 14th Biennial IEEE Conference on Electromagnetic Field Computation (CEFC 2010)
	/ 9781424470594/ Price:US$ 290.00



	2010 Proceedings 60th Electronic Components and Technology Conference (ECTC 2010)
	/ 9781424464104/ Price:US$ 500.00



	2010 Fifth IEEE International Symposium on Electronic Design, Test & Applications (DELTA 2010)
	/ 9781424460250/ Price:US$ 238.00



	2010 International Conference on Electronic Devices, Systems and Applications (ICEDSA 2010)
	/ 9781424466290/ Price:US$ 252.00



	Melecon 2010 - 2010 15th IEEE Mediterranean Electrotechnical Conference
	/ 9781424457939/ Price:US$ 462.00



	2010 Seventh IEEE International Conference and Workshops on Engineering of Autonomic and Autonomous Systems (EASe 2010)
	Sterritt, R/ 9781424465354/ Price:US$ 184.00



	2010 Second International Conference on Engineering Systems Management and Its Applications (ICESMA 2010)
	/ 9781424465200/ Price:US$ 229.00



	2010 9th International Conference on Environment and Electrical Engineering (EEEIC 2010)
	Janik, P./ 9781424453702/ Price:US$ 301.00



	2010 8th IEEE International Workshop on Factory Communication Systems (WFCS 2010)
	K. Proenza/ 9781424454600/ Price:US$ 226.00



	2010 18th IEEE Annual International Symposium on Field-Programmable Custom Computing Machines (FCCM 2010)
	K. Pocek/ 9781424471423/ Price:US$ 222.00



	2010 International Conference on Financial Theory and Engineering (ICFTE 2010)
	/ 9781424477579/ Price:US$ 240.00



	2010 IEEE International Frequency Control Symposium (FCS 2010)
	/ 9781424463992/ Price:US$ 302.00



	2010 Second International Conference on Games and Virtual Worlds for Serious Applications (VS-GAMES 2010)
	/ 9781424463312/ Price:US$ 208.00



	2010 IEEE Green Technologies Conference (IEEE-Green-2010)
	/ 9781424452743/ Price:US$ 222.00



	2010 13th International Conference on Ground Penetrating Radar (GPR 2010)
	Crocco, L./ 9781424446049/ Price:US$ 348.00



	2010 IEEE Haptics Symposium
	/ 9781424468218/ Price:US$ 259.00



	2010 Pan American Health Care Exchanges (PAHCE 2010)
	/ 9781424462919/ Price:US$ 226.00



	2010 IEEE Workshop on Health Care Management (WHCM 2010)
	/ 9781424449972/ Price:US$ 232.00



	2010 IEEE International High Level Design Validation and Test Workshop (HLDVT 2010)
	/ 9781424478057/ Price:US$ 204.00



	2010 5th ACM/IEEE International Conference on Human-Robot Interaction (HRI 2010)
	/ 9781424448920/ Price:US$ 284.00



	2010 IEEE Photonics Society Winter Topicals Meeting Series (WTM 2010)
	/ 9781424452408/ Price:US$ 247.00



	2010 IEEE Southwest Symposium on Image Analysis & Interpretation (SSIAI 2010)
	/ 9781424478019/ Price:US$ 213.00



	2010 International Conference on Image Analysis and Signal Processing (IASP 2010)
	Zhang, Z.J.J./ 9781424455546/ Price:US$ 321.00



	2010 International Conference on Indium Phosphide and Related Materials (IPRM 2010)
	/ 9781424459193/ Price:US$ 266.00



	2010 IEEE Industrial and Commercial Power Systems Technical Conference (I&CPS 2010)
	/ 9781424456000/ Price:US$ 217.00



	2010 the 5th IEEE Conference on Industrial Electronics and Applications (ICIEA 2010)
	/ 9781424450459/ Price:US$ 604.00



	2010 2nd International Conference on Industrial Mechatronics and Automation (ICIMA 2010)
	Lou, Q./ 9781424476534/ Price:US$ 413.00



	2010 IEEE International Conference on Industrial Technology (ICIT 2010)
	/ 9781424456956/ Price:US$ 510.00



	2010 2nd International Asia Conference on Informatics in Control, Automation and Robotics (CAR 2010)
	Wu, Y./ 9781424451920/ Price:US$ 521.00



	2010 IEEE International Conference on Information and Automation (ICIA 2010)
	/ 9781424457014/ Price:US$ 644.00



	2010 8th Asia-Pacific Symposium on Information and Telecommunication Technologies (APSITT 2010)
	/ 9781424464135/ Price:US$ 254.00



	2010 2nd International Symposium on Information Engineering and Electronic Commerce (IEEC 2010)
	V.E. Muchin/ 9781424469727/ Price:US$ 258.00



	2010 International Conference on Information Science and Applications (ICISA 2010)
	/ 9781424459421/ Price:US$ 318.00



	2010 3rd International Conference on Information Sciences and Interaction Sciences (ICIS 2010)
	Y. Peng/ 9781424473847/ Price:US$ 303.00



	2010 44th Annual Conference on Information Sciences and Systems (CISS 2010)
	/ 9781424474165/ Price:US$ 338.00



	2010 Information Theory and Applications Workshop (ITA 2010)
	/ 9781424470129/ Price:US$ 270.00



	2010 IEEE Information Theory Workshop (ITW 2010)
	/ 9781424463725/ Price:US$ 259.00



	2010 IEEE International Symposium on Information Theory Proceedings (ISIT 2010)
	/ 9781424478903/ Price:US$ 678.00



	2010 Innovative Smart Grid Technologies (ISGT 2010)
	/ 9781424462643/ Price:US$ 230.00



	2010 IEEE Instrumentation & Measurement Technology Conference (I2MTC 2010)
	/ 9781424428328/ Price:US$ 478.00



	2010 IEEE International Conference on Integrated Circuit Design and Technology (ICICDT 2010)
	/ 9781424457731/ Price:US$ 219.00



	2010 Workshop on Integrated Nonlinear Microwave and Millimeter-Wave Circuits (INMMIC 2010)
	/ 9781424474103/ Price:US$ 214.00



	2010 IEEE 14th International Conference on Intelligent Engineering Systems (INES 2010)
	/ 9781424476503/ Price:US$ 232.00



	2010 2nd International Workshop on Intelligent Systems and Applications (ISA 2010)
	Wang, Ch./ 9781424458721/ Price:US$ 443.00



	2010 International Conference on Intelligent Systems, Modelling and Simulation (ISMS 2010)
	Al-Dabass, D./ 9781424459841/ Price:US$ 254.00



	2010 IEEE International Interconnect Technology Conference (IITC 2010)
	/ 9781424476763/ Price:US$ 212.00



	2010 International Workshop on Junction Technology Extended Abstracts (IWJT 2010)
	Jiang, Y-L./ 9781424458660/ Price:US$ 174.00



	2010 International Conference on Logistics Systems and Intelligent Management (ICLSIM 2010)
	/ 9781424473311/ Price:US$ 602.00



	2010 IEEE International Conference on Management of Innovation & Technology (ICMIT 2010)
	/ 9781424465651/ Price:US$ 406.00



	2010 IEEE 26th Symposium on Mass Storage Systems and Technologies (MSST 2010)
	Khatib, M.G./ 9781424471522/ Price:US$ 224.00



	2010 International Conference on Measuring Technology and Mechatronics Automation (ICMTMA 2010)
	/ 9781424450015/ Price:US$ 960.00



	2010 7th International Symposium on Mechatronics and its Applications (ISMA 2010)
	/ 9781424466658/ Price:US$ 212.00



	2010 13th International Symposium MECHATRONIKA
	Maga, D./ 9781424479627/ Price:US$ 199.00



	2010 IEEE International Memory Workshop (IMW 2010)
	/ 9781424467198/ Price:US$ 209.00



	2010 IEEE 23rd International Conference on Micro Electro Mechanical Systems (MEMS 2010)
	/ 9781424457618/ Price:US$ 460.00



	2010 International Conference and Seminar on Micro/Nanotechnologies and Electron Devices (EDM 2010)
	Akulov, D.s./ 9781424466269/ Price:US$ 264.00



	2010 International Conference on Microelectronic Test Structures (ICMTS 2010)
	/ 9781424469123/ Price:US$ 216.00



	2010 IEEE Workshop on Microelectronics and Electron Devices (WMED 2010)
	/ 9781424465729/ Price:US$ 95.00



	2010 27th International Conference on Microelectronics Proceedings (MIEL 2010)
	/ 9781424472000/ Price:US$ 263.00



	2010 International Conference on Microwave and Millimeter Wave Technology (ICMMT 2010)
	/ 9781424457052/ Price:US$ 562.00



	2010 German Microwave Conference (GeMiC 2010)
	/ 9781424449330/ Price:US$ 227.00



	2010 75th ARFTG Microwave Measurement Conference (ARFTG 2010)
	/ 9781424463640/ Price:US$ 203.00



	2010 18th International Conference on Microwave Radar and Wireless Communications (MIKON 2010)
	Levitas, B./ 9781424452880/ Price:US$ 317.00



	2010 IEEE MTT-S International Microwave Symposium Digest (MTT 2010)
	/ 9781424460564/ Price:US$ 611.00



	2010 15th International Conference on Microwave Techniques (COMITE 2010)
	Z. Fedra/ 9781424463411/ Price:US$ 216.00



	IASTED International Conference on Environmental Management and Engineering 2009
	Hamza, M.H./ 9781615675401/ Price:US$ 204.00



	9th IASTED European Conference on Power and Energy Systems 2009 (EuroPES 2009)
	Almeida, A.T.D./ 9781615677504/ Price:US$ 300.00



	14th IASTED International Conference on Robotics and Applications 2009 (RA 2009)
	Asada, H./ 9781615679003/ Price:US$ 260.00



	ACEEE Summer Study on Energy Efficiency in Industry 2009
	/ 9781615675975/ Price:US$ 175.00



	31st Antenna Measurement Techniques Association Annual Symposium 2009 (AMTA 2009)
	/ 9781615678365/ Price:US$ 160.00



	29th Asian Conference on Remote Sensing 2008 (ACRS 2008)
	/ 9781615676156/ Price:US$ 225.00



	30th Asian Conference on Remote Sensing 2009 (ACRS 2009)
	/ 9781615679843/ Price:US$ 225.00



	International Workshop on Affective-Aware Virtual Agents and Social Robots 2009 (AFFINE 09)
	Castellano, G./ 9781617381461/ Price:US$ 65.00



	1st International Conference on Automotive User Interfaces and Interactive Vehicular Applications 2009 (AutomotiveUI 2009)
	/ 9781617386152/ Price:US$ 80.00



	2nd International Workshop on Computational Transportation Science 2009 (IWCTS 2009)
	/ 9781617381409/ Price:US$ 65.00



	1st International Conference on Computing for Geospatial Research and Application 2010 (COM.Geo 2010)
	/ 9781617387005/ Price:US$ 95.00



	Workshop on Data Mining using Matrices and Tensors 2009 (DMMT 09)
	Ding, C./ 9781617382420/ Price:US$ 65.00



	IET Colloquium on Reliability of Electromagnetic Systems 2007
	/ 9781615677085/ Price:US$ 135.00



	10th IET International Conference on Developments in Power System Protection 2010 (DPSP 2010)
	/ 9781617387159/ Price:US$ 195.00



	20th International Conference and Exhibition on Electricity Distribution 2009 (CIRED 2009)
	/ 9781615675227/ Price:US$ 350.00



	IET European Conference on European Pulsed Power 2009
	/ 9781617384639/ Price:US$ 145.00



	3rd International Conference on Imaging for Crime Detection and Prevention 2009 (ICDP 2009)
	/ 9781617383656/ Price:US$ 145.00



	11th International Conference on Ionospheric Radio Systems and Techniques 2009 (IRST 2009)
	/ 9781615677955/ Price:US$ 155.00



	IET Seminar on the Latest Technologies and Tools in Electronics Design 2008
	/ 9781615675869/ Price:US$ 145.00



	5th IET International Conference on Power Electronics, Machines and Drives 2010 (PEMD 2010)
	/ 9781617387166/ Price:US$ 245.00



	2010 Proceedings of the 33rd International Convention MIPRO
	Bilijanovic, P./ 9781424477630/ Price:US$ 427.00



	2010 IEEE 16th International Mixed-Signals, Sensors and Systems Test Workshop (IMS3TW 2010)
	/ 9781424477920/ Price:US$ 202.00



	2010 40th IEEE International Symposium on Multiple-Valued Logic (ISMVL 2010)
	/ 9781424467525/ Price:US$ 232.00



	2010 3rd International Nanoelectronics Conference (INEC 2010)
	Chu, P./ 9781424435432/ Price:US$ 737.00



	2010 IEEE/ACM International Symposium on Nanoscale Architectures (NANOARCH 2010)
	/ 9781424480203/ Price:US$ 95.00



	2010 Second International Workshop on Near Field Communication (NFC 2010)
	J. Langer/ 9781424464630/ Price:US$ 198.00



	2010 IEEE Symposium on New Frontiers in Dynamic Spectrum (DySPAN 2010)
	/ 9781424451890/ Price:US$ 270.00



	2010 10th Annual International Conference on New Technologies of Distributed Systems (NOTERE 2010)
	K. Drira/ 9781424470679/ Price:US$ 235.00



	2010 4th International Conference on New Trends in Information Science and Service Science (NISS 2010)
	Yaun, Ch./ 9781424469826/ Price:US$ 309.00



	2010 International School on Nonsinusoidal Currents and Compensation (ISNCC 2010)
	/ 9781424454365/ Price:US$ 215.00



	2010 1st International Nuclear & Renewable Energy Conference (INREC 2010)
	/ 9781424452132/ Price:US$ 262.00



	2010 International Conference on Optics, Photonics and Energy Engineering (OPEE 2010)
	Lou, Q./ 9781424452347/ Price:US$ 330.00



	2010 12th International Conference on Optimization of Electrical and Electronic Equipment (OPTIM 2010)
	/ 9781424470198/ Price:US$ 409.00



	2010 IEEE Pacific Visualization Symposium (PacificVis 2010)
	North, S./ 9781424466856/ Price:US$ 200.00



	2010 IEEE International Symposium on Parallel & Distributed Processing (IPDPS 2010)
	/ 9781424464425/ Price:US$ 296.00



	2010 IEEE International Symposium on Parallel & Distributed Processing, Workshops and Phd Forum (IPDPSW 2010)
	/ 9781424465330/ Price:US$ 408.00



	PCIC Europe 2010 Conference Record
	/ 9781424469680/ Price:US$ 213.00



	2010 Proceedings of VIth International Conference on Perspective Technologies and Methods in MEMS Design (MEMSTECH 2010)
	/ 9781424473250/ Price:US$ 223.00



	2010 Symposium on Photonics and Optoelectronics (SOPO 2010)
	/ 9781424449637/ Price:US$ 447.00



	2010 17th IEEE International Symposium on the Physical and Failure Analysis of Integrated Circuits (IPFA 2010)
	/ 9781424455966/ Price:US$ 239.00



	2010 Abstracts IEEE International Conference on Plasma Science (ICOPS 2010)
	/ 9781424454747/ Price:US$ 266.00



	IEEE/ION Position, Location and Navigation Symposium (PLANS 2010)
	/ 9781424450367/ Price:US$ 418.00



	2010 Power and Energy Conference at Illinois (PECI 2010)
	/ 9781424459025/ Price:US$ 192.00



	2010 Asia-Pacific Power and Energy Engineering Conference (APPEEC 2010)
	/ 9781424448128/ Price:US$ 1298.00



	2010 1st Power Electronic & Drive Systems & Technologies Conference (PEDSTC 2010)
	/ 9781424459445/ Price:US$ 253.00



	2010 2nd IEEE International Symposium on Power Electronics for Distributed Generation Systems (PEDG 2010)
	/ 9781424456697/ Price:US$ 353.00



	2010 International Symposium on Power Electronics, Electrical Drives, Automation and Motion (SPEEDAM 2010)
	/ 9781424449866/ Price:US$ 505.00



	2010 IEEE International Symposium on Power Line Communications and Its Applications (ISPLC 2010)
	/ 9781424450091/ Price:US$ 232.00



	2010 22nd International Symposium on Power Semiconductor Devices & IC's (ISPSD 2010)
	/ 9781424477180/ Price:US$ 243.00



	2010 IEEE Workshop on Principles of Advanced and Distributed Simulation (PADS 2010)
	/ 9781424472925/ Price:US$ 194.00



	2010 IEEE 11th International Conference on Probabilistic Methods Applied to Power Systems (PMAPS 2010)
	/ 9781424457205/ Price:US$ 319.00



	2010 IEEE International Professional Communication Conference (IPCC 2010)
	/ 9781424481453/ Price:US$ 242.00



	2010 Prognostics and System Health Management Conference (PHM-2010 Macau)
	/ 9781424447565/ Price:US$ 270.00



	2010 IEEE 18th International Conference on Program Comprehension (ICPC 2010)
	/ 9781424476046/ Price:US$ 232.00



	2010 VI Southern Programmable Logic Conference (SPL 2010)
	E.J.P. Santos/ 9781424463091/ Price:US$ 212.00



	2010 63rd Annual Conference for Protective Relay Engineers
	/ 9781424460731/ Price:US$ 218.00



	2010 11th International Symposium on Quality Electronic Design (ISQED 2010)
	/ 9781424464548/ Price:US$ 328.00



	2010 Second International Workshop on Quality of Multimedia Experience (QoMEX 2010)
	/ 9781424469598/ Price:US$ 220.00



	2010 IEEE 18th International Workshop on Quality of Service (IWQoS 2010)
	/ 9781424459872/ Price:US$ 244.00



	2010 Fourth International Conference on Quantum, Nano and Micro Technologies (ICQNM 2010)
	Ovchinnikov, V./ 9781424458073/ Price:US$ 186.00



	2010 IEEE Radar Conference
	/ 9781424458110/ Price:US$ 445.00



	2010 11th International Radar Symposium (IRS 2010)
	Levitas, B./ 9781424456130/ Price:US$ 282.00



	2010 IEEE Radio and Wireless Symposium (RWS 2010)
	/ 9781424447251/ Price:US$ 332.00



	2010 IEEE Radio Frequency Integrated Circuits Symposium (RFIC 2010)
	/ 9781424462407/ Price:US$ 308.00



	2010 20th International Conference Radioelektronika (RADIOELEKTRONIKA 2010)
	Fedra, Z./ 9781424463183/ Price:US$ 222.00



	2010 Proceedings - Annual Reliability and Maintainability Symposium (RAMS 2010)
	/ 9781424451029/ Price:US$ 266.00



	2010 IEEE International Reliability Physics Symposium (IRPS 2010)
	/ 9781424454303/ Price:US$ 393.00



	2010 Fourth International Conference on Research Challenges in Information Science (RCIS 2010)
	Loucopoulos, P./ 9781424448395/ Price:US$ 300.00



	2010 IEEE International Conference on RFID (IEEE RFID 2010)
	/ 9781424457427/ Price:US$ 220.00



	2010 IEEE International Conference on RFID-Technology and Applications (RFID-TA 2010)
	/ 9781424466979/ Price:US$ 230.00



	2010 IEEE International Conference on Robotics and Automation (ICRA 2010)
	/ 9781424450381/ Price:US$ 1012.00



	2010 IEEE Conference on Robotics Automation and Mechatronics (RAM 2010)
	/ 9781424465033/ Price:US$ 281.00



	2010 IEEE 19th International Workshop on Robotics in Alpe-Adria-Danube Region (RAAD 2010)
	/ 9781424468850/ Price:US$ 259.00



	2010 9th Roedunet International Conference (RoEduNet 2010)
	R. Brad/ 9781424473359/ Price:US$ 251.00



	2010 IEEE Rural Electric Power Conference (REPC 2010)
	/ 9781424454709/ Price:US$ 190.00



	2010 IEEE Sarnoff Symposium
	/ 9781424455928/ Price:US$ 249.00



	2010 IEEE International Conference on Semiconductor Electronics (ICSE 2010)
	/ 9781424466085/ Price:US$ 246.00



	2010 26th Annual IEEE Semiconductor Thermal Measurement and Management Symposium (SEMI-THERM 2010)
	/ 9781424464579/ Price:US$ 238.00



	2010 First Symposium on Sensorless Control for Electrical Drives (SLED 2010)
	/ 9781424470358/ Price:US$ 196.00



	2010 IEEE Sensors Applications Symposium (SAS 2010)
	/ 9781424449880/ Price:US$ 230.00



	2010 International Conference on Service Sciences (ICSS 2010)
	/ 9781424466030/ Price:US$ 234.00



	2010 7th International Conference on Service Systems and Service Management (ICSSSM 2010)
	/ 9781424464852/ Price:US$ 375.00



	2010 Shape Modeling International Conference (SMI 2010)
	J.P. Pernot/ 9781424472598/ Price:US$ 196.00



	2010 International Conference on Signal Acquisition and Processing (ICSAP 2010)
	/ 9781424457243/ Price:US$ 318.00



	2010 6th International Colloquium on Signal Processing & its Applications (CSPA 2010)
	Taib, M.N./ 9781424471218/ Price:US$ 244.00



	2010 IEEE 14th Workshop on Signal Propagation on Interconnects (SPI 2010)
	/ 9781424476114/ Price:US$ 214.00



	2010 Topical Meeting on Silicon Monolithic Integrated Circuits in RF Systems (SiRF 2010)
	/ 9781424454563/ Price:US$ 236.00



	2010 International ITG Workshop on Smart Antennas (WSA 2010)
	/ 9781424460700/ Price:US$ 242.00



	2010 IEEE International Solid-State Circuits Conference (ISSCC 2010)
	/ 9781424460335/ Price:US$ 394.00



	Proceedings of the IEEE SoutheastCon 2010 (SoutheastCon 2010)
	/ 9781424458547/ Price:US$ 290.00



	2010 IEEE International Symposium on Sustainable Systems and Technology (ISSST 2010)
	/ 9781424470945/ Price:US$ 244.00



	2010 5th International Conference on System of Systems Engineering (SoSE 2010)
	/ 9781424481972/ Price:US$ 242.00



	2010 43rd Hawaii International Conference on System Sciences (HICSS 2010)
	/ 9781424455096/ Price:US$ 654.00



	2010 42nd Southeastern Symposium on System Theory (SSST 2010)
	/ 9781424456901/ Price:US$ 237.00



	2010 IEEE Systems and Information Engineering Design Symposium (SIEDS 2010)
	Crowther, K./ 9781424475193/ Price:US$ 232.00



	2010 IEEE International Systems Conference
	/ 9781424458820/ Price:US$ 294.00



	2010 IEEE Long Island Systems, Applications and Technology Conference (LISAT 2010)
	/ 9781424455485/ Price:US$ 208.00



	2010 Fifth International Conference on Systems (ICONS 2010)
	Ege, R./ 9781424462315/ Price:US$ 197.00



	2010 IEEE International Symposium on Technology and Society (ISTAS 2010)
	Michael, K./ 9781424477777/ Price:US$ 275.00



	2010 IEEE Students Technology Symposium (TechSym 2010)
	/ 9781424459759/ Price:US$ 252.00



	2010 IEEE 32nd International Telecommunications Energy Conference (INTELEC 2010)
	/ 9781424433834/ Price:US$ 269.00



	2010 Sixth Advanced International Conference on Telecommunications (AICT 2010)
	/ 9781424467488/ Price:US$ 250.00



	2010 17th International Conference on Telecommunications (ICT 2010)
	/ 9781424452460/ Price:US$ 327.00



	2010 15th IEEE European Test Symposium (ETS 2010)
	/ 9781424458349/ Price:US$ 223.00



	2010 12th IEEE Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems (ITherm 2010)
	/ 9781424453429/ Price:US$ 404.00



	2010 11th International Thermal, Mechanical & Multi-Physics Simulation, and Experiments in Microelectronics and Microsystems (EuroSimE 2010)
	/ 9781424470266/ Price:US$ 310.00



	2010 IEEE Transforming Engineering Education: Creating Interdisciplinary Skills for Complex Global Environments
	/ 9781424460403/ Price:US$ 379.00



	2010 IEEE PES Transmission and Distribution Conference and Exposition (T&D 2010)
	/ 9781424465460/ Price:US$ 477.00



	2010 39th Annual Ultrasonic Industry Association Symposium (UIA 2010)
	Muratore, R./ 9781424479474/ Price:US$ 95.00



	2010 18th Biennial University/Government/Industry Micro/Nano Symposium (UGIM 2010)
	/ 9781424447312/ Price:US$ 216.00



	2010 IEEE International Vacuum Electronics Conference (IVEC 2010)
	/ 9781424470983/ Price:US$ 270.00



	2010 IEEE 71st Vehicular Technology Conference (VTC 2010-SPRING)
	/ 9781424425181/ Price:US$ 712.00



	2010 IEEE Virtual Reality Conference (VR 2010)
	Lok, B./ 9781424462377/ Price:US$ 244.00



	2010 International Symposium on VLSI Design, Automation and Test (VLSI-DAT 2010)
	/ 9781424452699/ Price:US$ 242.00



	2010 23rd International Conference on VLSI Design
	/ 9781424455416/ Price:US$ 242.00



	2010 International Symposium on VLSI Technology, Systems, and Applications (VLSI-TSA 2010)
	/ 9781424450633/ Price:US$ 207.00



	2010 28th VLSI Test Symposium (VTS 2010)
	/ 9781424466498/ Price:US$ 232.00



	2010 International Symposium on Voronoi Diagrams in Science and Engineering (ISVD 2010)
	M. Abolfazl Mostafavi/ 9781424476060/ Price:US$ 194.00



	2010 6th Conference on Wireless Advanced (WiAD 2010)
	/ 9781424470693/ Price:US$ 203.00



	2010 IEEE 11th Annual Wireless and Microwave Technology Conference (WAMICON 2010)
	/ 9781424466887/ Price:US$ 219.00



	2010 19th Annual Wireless and Optical Communications Conference (WOCC 2010)
	/ 9781424475971/ Price:US$ 245.00



	2010 European Wireless Conference (EW 2010)
	/ 9781424459995/ Price:US$ 328.00



	2010 Wireless Telecommunications Symposium (WTS 2010)
	/ 9781424465583/ Price:US$ 222.00



	Institute of Navigation International Technical Meeting 2010 (ITM 2010)
	/ 9781617381157/ Price:US$ 275.00



	International Symposium on Active Control of Sound and Vibration 2009 (ACTIVE 2009)
	Micheau, P./ 9781615677009/ Price:US$ 195.00



	38th International Congress and Exposition on Noise Control Engineering 2009 (INTER-NOISE 2009)
	Bolton, J. S./ 9781615676903/ Price:US$ 495.00



	24th National Conference on Noise Control Engineering 2010 (Noise-Con 10)
	Burroughs, C.B./ 9781617382949/ Price:US$ 195.00



	7th IET International Conference on Advances in Power System Control, Operation and Management 2006 (APSCOM 2006)
	/ 9781615676781/ Price:US$ 275.00



	2nd IET Seminar on Antennas and Propagation for Body-Centric Wireless Communications 2009
	/ 9781615678853/ Price:US$ 135.00



	Asset Management Conference 2009
	/ 9781617387494/ Price:US$ 145.00



	IET Seminar on Asset Management: Planning for the Unknown 2009
	/ 9781615675883/ Price:US$ 145.00



	IET Conference on Assisted Living 2009
	/ 9781615675890/ Price:US$ 125.00



	IET Seminar on Wideband and Ultrawideband Systems and Technologies: Evaluating Current Research and Development
	/ 9781615678822/ Price:US$ 135.00



	Cascaded Multilevel Converter: An Innovative Approach.
	Rangarajan, Rajmohan/ 9783639190731/ Price:EUR 49.00



	Advances in Time-Domain Computational Electromagnetics: Beyond Conventional Finite Difference Methods.
	Wang, Shumin/ 9783639198195/ Price:EUR 68.00



	Coherent THz Transition Radiation: Generation, Characterization, and Applications.
	Settakorn, Chitrlada, T./ 9783639125832/ Price:EUR 49.00



	Light Propagation in Nanostructured Metamaterials and Micro-Resonators: Subwavelength Light Confinement and Quantum Chaos.
	Alexander, Govyadinov/ 9783639152982/ Price:EUR 49.00



	National Conference on Signal and Image Processing Applications 2009
	/ 9781617387944/ Price:US$ 155.00



	IET Irish Signals and Systems Conference 2009 (ISSC 2009)
	/ 9781617384622/ Price:US$ 155.00



	5th IET Seminar on SIL Determination 2009
	/ 9781617383304/ Price:US$ 145.00



	IET Seminar on Smart Metering: Making it Happen 2009
	/ 9781615676095/ Price:US$ 125.00



	IET Conference on Substation Technology 2009: Analysing the Strategic and Practical Issues of Modern Substations
	/ 9781617383298/ Price:US$ 145.00



	IET Seminar on Safety Assessments 2010
	/ 9781617387401/ Price:US$ 145.00



	4th IET International Conference on Systems Safety 2009
	/ 9781617383823/ Price:US$ 155.00



	International Technology and Innovation Conference 2009 (ITIC 2009)
	/ 9781617382970/ Price:US$ 195.00



	55th Analysis Division Symposium 2010
	/ 9781617384783/ Price:US$ 120.00



	65th Annual Instrumentation Symposium for the Process Industries 2010
	/ 9781615679096/ Price:US$ 95.00



	56th International Instrumentation Symposium 2010
	/ 9781617385834/ Price:US$ 125.00



	ISA EXPO 2009
	/ 9781615676521/ Price:US$ 125.00



	53rd ISA POWID Symposium 2010
	/ 9781617386879/ Price:US$ 120.00



	19th Annual International Symposium of the International Council on Systems Engineering 2009 (INCOSE 2009)
	/ 9781615674398/ Price:US$ 225.00



	16th International Congress on Sound and Vibration 2009 (ICSV16)
	/ 9781615677368/ Price:US$ 495.00



	38th Annual Convention and Technical Symposium of the International Loran Association 2009 (ILA-38)
	/ 9781615678891/ Price:US$ 110.00



	14th International Flow Measurement Conference 2007 (FLOMEKO 2007)
	/ 9781615678020/ Price:US$ 145.00



	19th IMEKO World Congress 2009 IMEKO XIX World Congress
	/ 9781615675937/ Price:US$ 245.00



	20th IMEKO TC3 International Conference on Measurement of Force, Mass and Torque 2007
	/ 9781615676347/ Price:US$ 145.00



	3rd IMEKO TC16 International Conference on Pressure Measurement 2007
	/ 9781615676354/ Price:US$ 110.00



	10th Symposium on Recent Advancements in the Theory and Practice of Hardness Measurement 2007 (HARDMEKO 2007)
	/ 9781615676323/ Price:US$ 110.00



	1st IMEKO TC22 International Conference on Vibration Measurement 2007
	/ 9781615676330/ Price:US$ 110.00



	5th IMAPS/ACerS International Conference and Exhibition on Ceramic Interconnect and Ceramic Microsystems Technologies 2009 (CICMT 2009)
	/ 9781615673742/ Price:US$ 325.00



	International Conference and Exhibition on Device Packaging 2010
	/ 9781617386039/ Price:US$ 375.00



	International Conference on Automation, Robotics and Control Systems 2008 (ARCS-08)
	Karras, D.A./ 9781615677146/ Price:US$ 195.00



	International Conference on Automation, Robotics and Control Systems 2009 (ARCS-09)
	Chen, K./ 9781615676552/ Price:US$ 195.00



	10th Annual Conference of the International Speech Communication Association 2009 (INTERSPEECH 2009)
	/ 9781615676927/ Price:US$ 325.00



	27th International System Safety Conference and Joint Weapons System Safety Conference 2009 (ISSC/JWSSC 2009)
	/ 9781617387142/ Price:US$ 145.00



	Free Electron Laser Conference 2009 (FEL 2009)
	/ 9781617384165/ Price:US$ 195.00



	29th International Free Electron Laser Conference 2007 (FEL 2007)
	/ 9781615679485/ Price:US$ 125.00



	5th Annual International Conference on Fuel Cells Durability and Performance 2009
	/ 9781617381966/ Price:US$ 199.00



	Fuel Cells Durability and Performance 4th Edition Proceedings
	/ 9781617382239/ Price:US$ 299.00



	Lithium Mobile Power 3rd Edition Proceedings
	/ 9781617382222/ Price:US$ 299.00



	5th Annual International Conference on Lithium Mobile Power 2009
	/ 9781617381973/ Price:US$ 199.00



	International Symposium on Portable Energy 2009
	/ 9781617381980/ Price:US$ 199.00



	11th Annual International Conference on Small Fuel Cells 2009
	/ 9781617382000/ Price:US$ 199.00



	12th Annual International Conference on Small Fuel Cells 2010
	/ 9781617385100/ Price:US$ 199.00



	MEPTEC/SMTA Medical Electronics Symposium 2009
	/ 9781615679737/ Price:US$ 120.00



	MEPTEC/SMTA Medical Electronics Symposium 2009
	/ 9781615679744/ Price:US$ 120.00



	Test and Measurement Conference 2007
	/ 9781615676811/ Price:US$ 110.00



	Test and Measurement Conference 2008
	/ 9781615676828/ Price:US$ 195.00



	Test and Measurement Conference 2009
	/ 9781615679829/ Price:US$ 195.00



	42nd Annual Frontiers of Power Conference 2009
	/ 9781615676866/ Price:US$ 95.00



	32nd Annual Pacific Telecommunications Conference 2010 (PTC'10)
	/ 9781615678358/ Price:US$ 295.00



	4th Workshop on Neutron Measurements, Evaluations and Applications 2007 (NEMEA-4)
	Plompen, A./ 9781615678013/ Price:US$ 125.00



	Annual Assembly Meeting and Conference of the Radio Technical Commission for Maritime Services 2010 (RTCM 2010)
	/ 9781617387340/ Price:US$ 150.00



	NAV09 - Land: Location Systems for Intelligent Transport Systems and Indoor Guidance Applications
	/ 9781615679799/ Price:US$ 95.00



	NAV09 - Maritime: Shipborne Navigation - What's Coming Next?
	/ 9781615679775/ Price:US$ 95.00



	NAV09 - Positioning and Location
	/ 9781615679782/ Price:US$ 95.00



	International Symposium on Extreme Ultraviolet Lithography 2008 (2008 EUVL Symposium)
	/ 9781615676613/ Price:US$ 160.00



	19th International Congress on Acoustics 2007 (ICA 2007)
	/ 9781615677078/ Price:US$ 525.00



	Workshop on Algorithm Engineering and Experiments 2010 (ALENEX10)
	/ 9781615678174/ Price:US$ 120.00



	Workshop on Analytic Algorithmics and Combinatorics 2010 (ANALCO10)
	/ 9781615678181/ Price:US$ 120.00



	57th Annual Conference of the Society for Technical Communication 2010
	/ 9781617387876/ Price:US$ 120.00



	Society of Motion Picture and Television Engineers Annual Technical Conference and Exhibition 2009 (SMPTE 2009)
	/ 9781615676743/ Price:US$ 125.00



	Pan Pacific Microelectronics Symposium and Tabletop Exhibition 2010
	/ 9781615679478/ Price:US$ 225.00



	SMTA International Conference 2009
	/ 9781615675258/ Price:US$ 225.00



	International Conference on Soldering and Reliability 2009
	/ 9781615676644/ Price:US$ 110.00



	31st Industrial Energy Technology Conference 2009 (IETC 2009)
	/ 9781615677344/ Price:US$ 120.00



	TechCon: Conference for the Maintenance and Operation of High-Voltage Electrical Equipment 2010 (TechCon 2010)
	/ 9781617383182/ Price:US$ 145.00



	International Symposium on GPS/GNSS 2008
	/ 9781615676491/ Price:US$ 160.00



	PCB West Conference & Exhibition 2009
	/ 9781615676057/ Price:US$ 245.00



	18th Annual Conference on Characterization and Radiometric Calibration for Remote Sensing 2009 (CALCON 2009)
	/ 9781615676910/ Price:US$ 195.00



	Joint 41st International Symposium on Robotics and 6th German Conference on Robotics 2010 (ISR/ROBOTIK 2010)
	/ 9781617387197/ Price:US$ 495.00



	International Conference on High-Power Electron Beam Technology 2008 (EBEAM 2008)
	/ 9781615678075/ Price:US$ 125.00



	Battery Power 2009
	/ 9781615678693/ Price:US$ 325.00



	Magnetics Conference 2009
	/ 9781617387807/ Price:US$ 325.00



	5th Advanced Forum on Transportation of China 2009 (AFTC 2009)
	/ 9781617383816/ Price:US$ 145.00



	IET Seminar on Safety Assurance in Railways 2009
	/ 9781615676118/ Price:US$ 155.00



	IET Seminar on Systems Engineering in Railways 2009
	/ 9781617387395/ Price:US$ 145.00



	IET Seminar on Zero Carbon Buildings: Emerging Technologies and Policy Implementation 2008
	/ 9781615678068/ Price:US$ 135.00



	IET Seminar on Bionic Health: Next Generation Implants, Prosthetics and Devices 2009
	/ 9781617387500/ Price:US$ 155.00



	3rd IET Annual Seminar on Power Generation Control: Building Flexibility and Sustainability into Plants
	/ 9781615678792/ Price:US$ 135.00



	IET Seminar on Railway Customer Information Systems 2008
	/ 9781615678808/ Price:US$ 135.00



	3rd IET Professional Development Course on Railway Electrification Infrastructure and Systems 2007
	/ 9781615678860/ Price:US$ 135.00



	4th IET Professional Development Course on Railway Electrification Infrastructure & Systems 2009 (REIS)
	/ 9781615675876/ Price:US$ 145.00



	IET International Conference on Railway Engineering 2008 (ICRE 2008)
	/ 9781615678846/ Price:US$ 135.00



	IET Professional Development Course on Railway Signalling and Control Systems 2008 (RSCS 2008)
	/ 9781615678839/ Price:US$ 190.00



	IET Professional Development Course on Railway Signalling and Control Systems 2010 (RSCS 2010)
	/ 9781617388590/ Price:US$ 145.00



	IET Conference on Road Pricing 2008
	/ 9781615678815/ Price:US$ 155.00



	IET Road Transport Information and Control Conference and ITS United Kingdom Members Conference 2010 (RTIC 2010)
	/ 9781617387937/ Price:US$ 155.00



	American Society for Engineering Education Annual Conference and Exposition 2009
	/ 9781615676163/ Price:US$ 995.00



	Laser Resonators.
	Bykov, Vladimir P./ 9781904602590/ Price:GBP 95.00



VF05-33	Technologies for Electrical Power Conversion, Efficiency, and Distribution: Methods and Processes.
	Antchev, Mihail/ 9781615206476/ Price:US$ 180.00

	As societal population increases, the need for energy becomes a crisis of great importance. Technologies for Electrical Power Conversion, Efficiency, and Distribution: Methods and Processes combines unparalleled research, contemporary achievements, and emerging trends within electrical energy conversion technologies and renewable energy sources. The scholarly findings compiled provide a background for discussion of the problems and opportunities of power efficiency and energy conversion in order to develop innovative ways to implement such cutting-edge technologies in the future.

VF05-30	Cooperative Communications for Improved Wireless Network Transmission: Framework for Virtual Antenna Array Applications.
	Uysal, Murat/ 9781605666655/ Price:US$ 180.00

	Cooperative communications, an emerging research area spurring tremendous excitement within academia and industry, has experienced an increase in demands for wireless multimedia and interactive services in recent years. Cooperative Communications for Improved Wireless Network Transmission: Framework for Virtual Antenna Array Applications provides practitioners, researchers, and academicians with fundamental principles of cooperative communication, presenting the latest advances in this rapidly evolving field. Containing research from leading international experts, this Premier Reference Source offers readers diverse findings and exposes underlying issues in the analysis, design, and optimization of wireless systems.

VF05-29	Optical Access Networks and Advanced Photonics: Technologies and Deployment Strategies.
	Chochliouros, Ioannis P./ 9781605667072/ Price:US$ 180.00

	With the growing demand for increased bandwidth, conventional broadband access solutions will quickly become a hindrance in terms of bandwidth provision for network access. Optical Access Networks and Advanced Photonics: Technologies and Deployment Strategies presents a comprehensive overview of emerging optical access network solutions to efficiently meet the anticipated growth in bandwidth demand. Covering topics such as next-generation networking, communication networks, and photonics, this book provides the latest technology trends in order to grasp the expected beneficial use of optical access infrastructures.

VF05-28	Behavioral Modeling for Embedded Systems and Technologies: Applications for Design and Implementation.
	Gomes, Luis/ 9781605667508/ Price:US$ 180.00

	The development of embedded systems offers a higher degree of abstraction, crucial to tackling the growing complexity and usage of model-driven approaches. Behavioral Modeling for Embedded Systems and Technologies: Applications for Design and Implementation provides an overview on innovative behavior models currently used for developing embedded systems, accentuating on graphical and visual notations. This dynamic compilation presents an authoritative reference collection to the most significant models of computation currently in use for embedded systems design.

VF05-26	Localization Algorithms and Strategies for Wireless Sensor Networks.
	Mao, Guoqiang/ 9781605663968/ Price:US$ 195.00

	Wireless localization techniques are an area that has attracted interest from both industry and academia, with self-localization capability providing a highly desirable characteristic of wireless sensor networks. Localization Algorithms and Strategies for Wireless Sensor Networks encompasses the significant and fast growing area of wireless localization techniques. This book provides comprehensive and up-to-date coverage of topics and fundamental theories underpinning measurement techniques and localization algorithms. A useful compilation for academicians, researchers, and practitioners, this Premier Reference Source contains relevant references and the latest studies emerging out of the wireless sensor network field.

VF05-25	Systems Analysis and Design for Advanced Modeling Methods: Best Practices.
	Bajaj, Akhilesh/ 9781605663449/ Price:US$ 195.00

	The field of systems analysis and design is experiencing ongoing changes that significantly impact the way information systems are being analyzed and designed in practice. Systems Analysis and Design for Advanced Modeling Methods: Best Practices collects work representing leading research in the area of systems analysis and design practices and methodologies. This Premier Reference Source provides researchers, academicians, and practitioners with a useful overview and related references in the field.

VF05-24	Context-Aware Mobile and Ubiquitous Computing for Enhanced Usability: Adaptive Technologies and Applications.
	Stojanovic, Dragan/ 9781605662909/ Price:US$ 195.00

	Advances in mobile computing, wireless communications, mobile positioning, and sensor technologies have given rise to a new class of context-aware mobile and ubiquitous applications. Context-Aware Mobile and Ubiquitous Computing for Enhanced Usability: Adaptive Technologies and Applications provides thorough insights and significant research developments on mobile technologies and services. This significant reference book explains how users of such applications access intelligent and adaptable information services, maximizing convenience and minimizing intrusion.

VF05-23	Auto-Identification and Ubiquitous Computing Applications: RFID and Smart Technologies for Information Convergence.
	Symonds, Judith/ 9781605662985/ Price:US$ 195.00

	There is a need within radio-frequency identification (RFID) and other smart technologies to understand related practical implications. Auto-Identification and Ubiquitous Computing Applications: RFID and Smart Technologies for Information Convergence reports on problems related to the primary use of RFID technologies. This book provides a detailed overview of RFID literature, specifically in using RFID and smart technologies for identification, and draws together several different fields of research across supply chain management, asset tracking, and novel use of RFID for identification.

VF05-22	Innovative Automatic Identification and Location-Based Services: From Bar Codes to Chip Implants.
	Michael, Katina/ 9781599047959/ Price:US$ 165.00

	Automatic identification has evolved to use techniques that can identify an object or subject without direct human intervention. Such devices include the bar code, magnetic-stripe, integrated circuit, and biometric and radio-frequency identification. Innovative Automatic Identification & Location-Based Services: From Bar Codes to Chip Implants emphasizes the convergence and trajectory of automatic identification and location-based services toward chip implants and real-time positioning capabilities. Recording the history of automatic identification, this book also discusses the social, cultural, and ethical implications of the technological possibilities with respect to national security initiatives.

VF05-21	Handbook of Systems Engineering and Management.
	Sage, Andrew P./ 9780470083536/ Price:US$ 311.95

	The handbook is written and edited for systems engineers in industry and government, and to serve as a university reference handbook in systems engineering and management. It is primarily focused on systems engineering and systems management for fielding systems of all types, especially systems that are information technology and software intensive and which involve human and organizational elements. By focusing on systems engineering processes and systems management, the editors continue to produce a long lasting handbook that will make a difference in the design of systems of all types that are large in scale and/or scope.

SF05-461	Analysis and Design of Autonomous Microwave Circuits.
	Suarez, Almudena/ 9780470050743/ Price:US$ 202.95



SF05-409	FACTS: Controllers in Power Transmission and Distribution.
	Padiyar, K. R./ 9781848290105/ Price:GBP 50.00

	The emerging technology of Flexible AC Transmission System (FACTS) enables planning and operation of power systems at minimum costs, without compromising security. This is based on modern high power electronic systems that provide fast controllability to ensure ‘flexible’ operation under changing system conditions. This book presents a comprehensive treatment of the subject by discussing the operating principles, mathematical models, control design and issues that affect the applications. The concepts are explained often with illustrative examples and case studies. In particular, the book presents an in-depth coverage of: * Applications of SVC, TCSC, GCSC, SPST, STATCOM, SSSC, UPFC, IPFC and IPC for voltage/power control in transmission systems. * Application of DSTATCOM, DVR and UPQC for improving power quality in distribution systems. * Design of Power Oscillation Damping (POD) controllers. * Discrete control of FACTS for improving transient stability. * Mitigation of SSR using series FACTS Controllers.

SF05-389	Sound and Recording.
	Rumsey, Francis/ 9780240521633/ Price:US$ 57.95



SF05-389	Digital Video Recorders: DVRs Changing TV and Advertising Forever.
	Schaeffler, Jimmy/ 9780240811161/ Price:US$ 41.95



SF05-379	Electrostatic Discharge: Understand, Simulate and Fix ESD Problems.
	Mardiguian, Michel/ 9780470397046/ Price:US$ 138.95



SF05-379	Surface Impedance Boundary Conditions: A Comprehensive Approach.
	Yuferev, Sergey V./ 9781420044898/ Price:GBP 170.00



SF05-379	Ugly's Electrical Desk Reference.
	Hart, George V./ 9780763773335/ Price:US$ 44.95

	Ugly's Electrical Desk Reference is the perfect resource for electricians, engineers, contractors, designers, maintenance workers, and instructors wanting fast access to essential information. Containing all the information found in Ugly's Electrical References, 2008 Edition pocket guide, the new Desk Reference also includes new key terms and definitions and additional information on electrical safety.

SF05-378	Diagnostic Testing and Life Estimation of Power Equipment.
	Ramu, T. S./ 9781906574253/ Price:GBP 35.00

	This book is intended to serve as a textbook for students of electrical engineering at the graduate level. The inclusion of a number of problems, many of which are completely solved, makes this book very useful in understanding topics in applied statistics and physics of dielectrics. Also, the contents are so designed as to provide a broad picture of dielectrics and electrical insulation. In view of this, the author believes that manufacturers of high voltage and high power equipments can be benefited to a considerable extent. The book could be of particular interest to research engineers/scientists working in research laboratories and conducting applied insulation research. Power supply utilities can consult this book for scheduling the diagnostic testing and condition monitoring schedules. Station engineers will be able to derive support in analyzing, for example, gas analysis and partial discharge data, if they are equipped with facilities to carry out such measurements.

SF05-376	Electrical Power Systems.
	Wadhwa, C. L./ 9781906574031/ Price:GBP 50.00

	The book provides a clear, systematic and exhaustive exposition of the various dimensions of electrical power systems, both at basic and advanced levels, explained and illustrated through solved examples. Salient Features: * Fundamentals of power systems, line constant calculations and performance of overhead lines * Mechanical design of lines, HVDC lines, corona, insulators and insulated cables * Voltage control, neutral grounding and transients in power systems * Fault calculation, protective relays including digital relays and circuit breakers * Power systems synchronous stability and voltage stability * Insulation coordination and over voltage protection * Modern topics like load flows, economic load dispatch, load frequency control and compensation in power system. * State estimation in power systems, unit commitment, economic scheduling of hydrothermal plants and optimal power flows * Zbus formulation, power transformers and synchronous machines as power system elements * Large number of solved examples, practice problems and multiple choice questions. With all these features, this is an invaluable textbook for undergraduate electrical engineering students and practicing engineers.

SF05-376	RF Bulk Acoustic Wave Filters for Communications.
	Hashimoto, Ken-Ya/ 9781596933217/ Price:GBP 133.00



SF05-376	Quick Finite Elements for Electromagnetic Waves.(With CD-ROM)
	Pelosi, Giuseppe/ 9781596933453/ Price:GBP 153.00



SF05-376	Analysis and Design of Control Systems Using MATLAB.
	Dukkipati, Rao V./ 9781906574192/ Price:GBP 40.00

	The book Analysis and Design of Control Systems using MATLAB, is designed as a supplement to an introductory course in feedback control systems for undergraduate or graduate engineering students of all disciplines. Feedback control systems engineering is a multidisciplinary subject and presents a control engineering methodology based on mathematical fundamentals and stresses physical system modeling. This book includes the coverage of classical methods of control systems engineering: introduction to control systems, matrix analysis, Laplace transforms, mathematical modeling of dynamic systems, control system representation, performance and stability of feedback systems, analysis and design of feedback control systems, state space analysis and design, MATLAB basics and MATLAB tutorial. The numerous worked examples offer detailed explanations, and guide the students through each set of problems to enable them to save a great deal of time and effort in arriving at an understanding of problems in this subject. Extensive references to guide the students to further sources of information on control systems and MATLAB is provided. In addition to students, practising engineers will also find this book immensely useful.

SF05-375	Superconductivity.
	Kakani, S. L./ 9781848290051/ Price:GBP 55.00

	Superconductivity is a striking phenomenon that has attracted the attention of physicists, chemists, material scientists, engineers, and also the non-technical public. The discovery of high-Tc cuprates opened up a new class of materials in this field. This significant and exciting discovery has posed two new problems: of making High-Tc materials available to technology at room temperature on one hand and of exploring the possible mechanism of High-Tc superconductivity on the other. The beginning of the 21st century sees superconductor applications reaching important milestones. Superconductors now make possible the most advanced experiments in chemistry, biochemistry, particle physics and health sciences. Superconductors are also becoming part of the fabric of modern-day life. This outstanding and invaluable volume has been very systematically structured and organised covering all aspects of superconductivity. The first five chapters deal with basic principles and microscopic weak coupling BCS theory of superconductivity. Chapters 6 to 8 are devoted to high-Tc cuprates covering experimental results and theories. Chapter 9 is diverted to new emerging superconductors and the last chapter describes the potential applications of superconductors.

SF05-375	Network Analysis and Synthesus.(Including Linear System Analysis)
	Wadwha, C. L./ 9781848290020/ Price:GBP 47.50

	This book has been designed as a basic text for undergraduate students of electrical, electronics and communication and computer engineering. The book explains both fundamental concepts such as circuit elements, Kirchhoff’s laws, network equations and resonance, and relatively advanced topics, namely modern filters, state variable analysis, active RC filters and sensitivity considerations. The book is laid out in a systematic and user-friendly way, consisting of 16 chapters, each with solved examples and practice problems to immediately test the reader’s understanding of the subject. There are also over 500 multiple choice questions at the end of the book for the reader to dip into and further assess his grasp of the book. In particular, Prof. Wadhwa deals with the theory and application of Fourier and Laplace transforms, classical and modern filter theory, z-transform for discrete systems and analogous systems, SPICE, and both Foster and Cauer realisation. This is the third edition of a successful textbook suitable for courses in electrical and computer engineering and also relevant to postgraduates and professional engineers.

SF05-375	Control Systems Engineering.
	Nagrath, I. J./ 9781848290037/ Price:GBP 47.50

	This book provides an integrated treatment of continuous-time and discrete-time systems. It emphasises the interdisciplinary nature of the subject and examples have been drawn from various engineering disciplines to illustrate the basic system concepts. In particular, the book deals with the modelling of practical systems involving various hardware. Time and frequency domain techniques of the analysis and design of control systems have been discussed at length. Consisting of 16 chapters, this new edition has been improved by the addition of numerous real-world examples, and by the inclusion of PID controller design, a comparison table of long/lead compensators, industrial OPAMP compensating networks and a design example using root-locus technique. “Control Systems Engineering 5e” is an outstanding textbook which can be used at advanced undergraduate or post graduate level on diverse courses within the broad scope of engineering and will be a valued addition to any engineering library.

SF05-374	Stallcup's Journeyman Electrician's Study Guide, 2008 Edition.
	Stallcup, James G./ 9780763752569/ Price:US$ 135.95

	Follow the advice of acclaimed electrical author and trainer James G. Stallcup to secure your Journeyman License on the first try. The same text that's helped thousands of electricians with skill-building tools and over 2,000 problems is now updated with new questions reflecting the 2008 NEC?. Take sample tests to measure your knowledge on: * Grounding * Overcurrent protection * Motors and compressors * Renumbered Article 220: Branch-Circuit, Feeder, and Service Calculations

SF05-374	EPLAN Electric P8 Reference Handbook.
	Gischel, Bernd/ 9783446418325/ Price:EUR 99.90



SF05-373	Electrical Safety-Related Work Practices.
	Hickman, Palmer/ 9780763754280/ Price:US$ 149.95

	The NJATC trains top-quality electrical workers across the country. This Second Edition text covers electrical safety requirements and safety-related work practices of OSHA and the National Fire Protection Association electrical safety in the workplace code, NFPA 70E?. Specific topics include electrical safety culture, hazard awareness, design considerations, electrical safety program, training, calculation of short-circuit currents, arc flash hazard analysis methods, PPE, and equipment maintenance. Chapters explore calculations required to comply with NFPA 70E, and techniques that can be applied to significantly reduce or eliminate electrical hazards. Each chapter includes two real-life case studies and recommendations for how these incidents could have been avoided. A must for electrical safety professionals, instructors, electrical workers, and contractors.

SF05-372	Electrical Engineering Materials.
	Basak, T. K./ 9781906574079/ Price:GBP 25.00

	This book focuses on a broad spectrum of electrical engineering materials at the undergraduate and postgraduate level. It deals with fundamentals of the subject matter in a comprehensive way with emphasis on different devices in the field of material science. The text includes new developments in the subject elaborating electronic devices and their applications. The subject is particularly covered and explained lucidly are in areas like magnetic materials, semiconductors, semiconductor devices, superconductors, and insulating materials.

SF05-370	Electrical Inspection Manual with Checklists, 2008 Edition.(With CD-ROM)
	Williams, Noel/ 9780763754303/ Price:US$ 192.95

	Written by a certified electrical inspector and endorsed by the International Association of Electrical Inspectors (IAEI), the Electrical Inspection Manual carefully reviews the items inspectors are required to check on all types of electrical installations. Updated for the 2008 National Electrical Code?, this book contains over 70 checklists for residential, commercial, and industrial jobs, including special occupancies, fire alarm circuits, and more. Fully illustrated chapters explain significant tasks, define terms, outline key questions, and provide a concise overview of the electrical inspection process.

SF05-359	Stallcup's Electrical Design, 2008 Edition.
	Stallcup, James G./ 9780763752538/ Price:US$ 88.95

	The best electrical design practices change with every edition of the National Electrical CodeR. Stallcup'sR Electrical Design Book expertly explains these changes and how they apply to the design and installation of electrical wiring systems. Strategically designed, the large workbook format provides valuable design tips, NECR loops, examples, quick calculations, and effective illustrations with Code references. Descriptions of common industry problems and "rule of thumb" methods for fast and accurate design answers are provided, along with quizzes, tests, and final examinations for license preparation. With the abundant amount of detailed information provided, Stallcup'sR is the most comprehensive design book of its kind.

SF05-358	Electrician's Exam Prep.
	Miller, Charles R./ 9780763751180/ Price:US$ 131.95

	Based on the successful training seminar conducted by NECR expert Charles R. Miller, The Electrician's Exam Prep Manual cuts through complex topics to help students pass Journeyman or Master Electrician licensing exams. Using clear, concise language, this book takes users through the preparation process, explaining every NECR topic along the way. Aspiring electricians will feel prepared after completing the Manual's 23 sample exams, addressing general electrical knowledge plus NECR rules. A special feature identifies key Code sections for highlighting, to assist in studying and to carry in to exams where allowed.

	Control Systems Engineering.
	Sivanagaraju, S./ 9781906574338/ Price:GBP 45.00

	The book Control Systems Engineering is intended for undergraduate students. It is helpful for those interested in learning about the basic principles and techniques of control systems. A number of solved and exercise problems, descriptive questions, and short questions and answers appended to the book make it an ideal textbook.

	Electric Circuit Analysis.
	S.R., Paranjothi/ 9781906574352/ Price:GBP 35.00

	The book ``Electric Circuit Analysis`` has been designed as an introductory course for all disciplines of Engineering and has a much greater significance for students of Electrical, Communication & Instrumentation Engineering. This book helps in learning the basics of electrical circuit elements and provides the ways to connect them in circuit. Also some of the basic mathematical techniques are given, useful for solving linear differential equations which is a pre-requisite of both undergraduate and graduate programmes. In this revised edition, the main objective is to provide a detailed account of basic circuit concept, circuit model and methods of circuit analysis in time and frequency domain for solving simple and multidimensional circuit problems.

VF05-20	Selected Readings on Telecommunications and Networking.
	Gutierrez, Jairo/ 9781605660943/ Price:US$ 195.00

	Selected Readings on Telecommunications and Networking supplements course instruction and student research with quality articles focused on key issues concerning the planning, design, maintenance, and management of telecommunications and networking technologies. Containing over 30 chapters from authors across the globe, these selected readings in areas such as collaborative technologies, virtual teams, and wireless systems depict the most relevant and important areas of classroom discussion within the categories of Fundamental Concepts and Theories; Development and Design Methodologies; Tools and Technologies; Application and Utilization; Critical Issues; and Emerging Trends.

VF05-19	Multimedia Transcoding in Mobile and Wireless Networks.
	Ahmad, Ashraf M.A./ 9781599049847/ Price:US$ 195.00

	In recent years, the field of multimedia communication in wireless and mobile video has grown in attraction. As the number of networks, types of devices, and content representation formats increase, the need for multimedia transcoding in wireless and mobile networks intensifies in order to provide a seamless interaction between content creation and usage. Multimedia Transcoding in Mobile and Wireless Networks addresses the transcoding of all multimedia elements including video, audio and text, while addressing both practical and theoretical problems in the field. A must have resource for all stakeholders in mobile and wireless technologies, this book embodies state-of-the-art knowledge of transcoding as it is embedded in today’s pioneering technologies and leading research.

VF05-18	Mobile Computing: Concepts, Methodologies, Tools, and Applications, 6-Vols/Set.
	Taniar, David/ 9781605660547/ Price:US$ 1950.00

	Continual enhancements and innovation in the mobile computing industry have redesigned and simplified the way businesses and individuals can communicate and conduct their everyday professional and social interactions. So significant are these technological contributions such as PDAs, media players, and wireless sensor networks that it has deeply impacted and influenced nearly every industry in modern societies. Mobile Computing: Concepts, Methodologies, Tools, and Applications advances the emergent field of mobile computing through a substantial six-volume set of highly developed entries from over 400 leading researchers. This key reference collection contains over 300 chapters of fascinating approaches, observations, and models in topic areas such as mobile devices, surveillance technologies, and wireless communications. Mobile Computing: Concepts, Methodologies, Tools, and Applications is a must-have for practitioners, academicians, and learners in the field of mobile computing and a valuable resource for any library.

VF05-17	Internet-Enabled Handheld Devices, Computing, and Programming: Mobile Commerce and Personal Data Applications.
	Hu, Wen-Chen/ 9781591407690/ Price:US$ 165.00

	The computing power and Internet connectivity of handheld devices has increased exponentially, creating a vast realm of potential applications in mobile commerce and personal information management. Internet-Enabled Handheld Devices, Computing, and Programming: Mobile Commerce and Personal Data Applications comprehensively reviews the state of handheld computing technology and application development, with coverage of such cutting-edge topics as Advanced Wireless Markup Language and J2ME programming. Uniquely focused on innovations that can drive mobile commerce and personal information management to new levels of utility and added value, this book provides a much-needed resource for academics and students engaged in mobile-technology research. It will also guide the efforts of developers and managers in industry seeking to maximize the evolving commercial opportunities presented by the current generation of internet-enabled handheld devices.

VF05-16	Handbook of Research on Wireless Multimedia: Quality of Service and Solutions.
	Cranley, Nicola/ 9781599048208/ Price:US$ 265.00

	The recent rapid advances in wireless technologies have created a demand for high quality multimedia applications and services. These advanced multimedia applications give rise to a new set of challenges in providing Quality of Service (QoS) when delivering these services over wireless networks. Handbook of Research on Wireless Multimedia: Quality of Service and Solutions highlights and discusses the underlying QoS issues that arise in the delivery of real-time multimedia services over wireless networks. This cutting-edge book presents state-of-the-art solutions from leading researchers active in the field to address the QoS issues for different wireless multimedia applications.

VF05-13	Handbook of Organic Electronics and Photonics, 3-Vols/Set.
	Nalwa, Hari Singh/ 9781588830951/ Price:US$ 998.00

	Handbook of Organic Electronics and Photonics brings together chemists, materials scientists, physicists, and engineers from both academia and industry to share information on the organic materials for emerging new electronic and photonic technologies. The three volume set offers exclusive coverage on all types of organic molecular and polymeric functional materials, their electronic and photonic properties and device applications. The research topics include all types of molecular, organic, and polymeric functional materials, their nanostructured composites and blends, their synthesis, processing and nanofabrication (molecular crystals, multilayers, self-assemblies, ultrathin films), spectroscopic characterization, morphology, electronic and photonic properties and device applications. organic-inorganic hybrid materials for electronics and photonics, conducting polymers, conjugated oligomers and polymers, organic semiconductors, single electron transistors, organic light-emitting diodes (OLEDs), organic field-effect transistors (OFETs), full-color display devices, organic random lasers, integrated circuits, sensors, detectors, Organic NLO materials, polymer opto-electronics, organic semiconductor lasers, biomolecular electronics, biological macromolecules such as DNA and proteins, dendrimers, liquid crystals, nanostructured (fullerenes, nanotubes, nanowires, quantum dots, nanoparticles, nanoclusters, nanocrystals, nanocomposites) organic materials, industrial applications, sensors, displays, solar cells, holography, data storage, thin film transistor (TFTs), artificial muscles, organics for photonics assembly and packaging, and coatings. This handbook contains 35 review chapters focused on different aspects of organic materials used in wide variety of electronic and photonic applications written by world's leading experts.

SF05-371	Advanced Computer Techniques in Applied Electromagnetics.
	Wiak. Stawomir/ 9781586038953/ Price:EUR 125.00

	The contributions in this publication on electromagnetic fields in electrical engineering aim at joining theory and practice, thus the majority of the papers are deeply rooted in engineering problems and simultaneously present a high theoretical level. There are three chapters in this volume, all divided into seven subchapters. Papers gathered in the first chapter are mainly devoted to physics of electromagnetic materials and mathematical approaches to electromagnetic problems. The next chapter contains papers dealing with numerical (or computer) analysis of electromagnetic devices and phenomena, whereas the last chapter reveals the world of engineering problems, showing how theoretical and methodological considerations can be transferred to real engineering problems. The editors hope that this book will help the world-wide electromagnetic community, both academic and engineering, in better understanding electromagnetism itself and its application to technical problems.

SF05-371	Electromagnetic Nondestructive Evaluation (XI).
	Tamburrino, A./ 9781586038960/ Price:EUR 125.00

	The 12th International Workshop on Electromagnetic Nondestructive Evaluation (ENDE’07) was held from the 19th to the 21st of June 2007 at the Wolfson Centre for Magnetics at Cardiff University, Cardiff, United Kingdom. The aim of this annual workshop is to bring together engineers and scientists from universities, research institutions and industry to discuss and exchange the latest ideas and findings in basic research and development as well as industrial applications of electromagnetic nondestructive evaluation. This publication contains the proceedings of the workshop. In this book you will find a variety of topics on both theoretical and experimental aspects of nondestructive evaluation in eddy currents, magnetic measurements, magnetic flux leakage, Barkhausen methods, new methods and inverse problems for crack detection.

SF05-366	Superionic Conductors: Heterostructures and Elements of Functional Electronics Based on Them.
	Karamov, F. A./ 9781904602262/ Price:GBP 80.00



SF05-361	Electromagnetic Field, Health and Environment: Proceedings of EHE'07.
	Krawczyk, A./ 9781586038601/ Price:EUR 150.00

	Electromagnetic Field, Health and Environment mirrors the image of the EHE’07 conference which attracted people investigating the phenomenon of interaction of electromagnetic field and biological objects. This book tries to enlighten the problem with the use of scientifically founded facts kept within methodological discipline. The particular targets of the book can be briefly summarized as reviewing, presenting and discussing innovations in computer modeling, measurement and simulation of bioelectromagnetic phenomena, analyzing physical and biological aspects of bioelectromagnetic phenomena, and discussing environmental safety and policy issues as well as relevant international standards. The book is divided into five chapters of which the first three chapters deal with the electromagnetic field in combination with environment, health and biology respectively. The fourth chapter focuses on computer simulation in bioelectromagnetics, whereas the fifth chapter sees to the electromagnetic field in policy and standards. An additional three contributions are included: the first contribution shows the brief essay on Heinrich Rudolf Hertz in which the occasion of his birth 150 years ago is celebrated. The second summarizes the long-lasting research in magnetic stimulation and bioimaging and the third one considers some theoretical aspects of electromagnetic field.

SF05-353	Electrical Wiring Residential.
	Mullin, Ray C./ 9781418050955/ Price:US$ 107.95



SF05-352	Digital Systems and Applications.
	Oklobdzija, Vojin/ 9780849386190/ Price:GBP 140.00



SF05-351	Residential Construction Academy: House Wiring.
	Fletcher, Greg/ 9781418010980/ Price:US$ 150.95



SF05-350	Stallcup's Illustrated Code Changes, 2008 Edition.
	Stallcup, James G./ 9780763751494/ Price:US$ 110.95

	The 2008 Edition of the National Electrical CodeR contains a range of complex revisions that electrical personnel and students must be made aware of. Stallcup'sR Illustrated Code Changes simplifies this process using clear, concise explanations and detailed full-color illustrations to explain the 400 broadest revisions. Following the organization of the 2008 NECR, Stallcup reviews each change in numerical order to correlate with the "Articles" and "Sections" as they appear in the Code in an effort to maximize student comprehension and make navigating the NECR quick and easy. Known as the most thorough Code change book available, Stallcup'sR offers expert descriptions on key topics such as wiring and protection, wiring methods and materials, equipment for general use, and much more.

SF05-349	Stallcup's Electrical Equipment Maintenance Simplified: Based on NFPA 70B.
	Stallcup/ 9780763751159/ Price:US$ 161.95

	In this timely and original book, noted electrical authority James Stallcup explains and applies the rules and regulations contained in NFPA 70B, Recommended Practice for Electrical Equipment Maintenance, 2007 Edition. Similar to Stallcup'sR OSHA Electrical Regulations (based on NFPA 70E), Stallcup'sR Electrical Equipment Maintenance Simplified provides explanations of recommended practices, guidelines for implementation, and illustrated examples of procedures. The essential manual comprehensively describes the proper training required for safe and effective preventive maintenance of industrial electrical systems and equipment. Plant and maintenance electricians will find this highly anticipated handbook to be a thorough explanation of NFPA 70B, and a valuable guide to on-the-job procedures.

SF05-346	Engineer's Guide to the National Electrical Code.
	Stauffer, H. B./ 9780763748869/ Price:US$ 65.95

	One of the most important elements when designing a building's electrical subsystems is compliance with National Electrical CodeR safety regulations. Yet, many university engineering curricula do not address this and other essential building codes. For this reason, H. Brooke Stauffer Director of Codes and Standards at the National Electrical Contractors Association, has written this informative introduction to clearly and accessibly steer beginning electrical engineers through the often confusing NECR regulations. This quick guide will assist designers as they navigate the structure and organization of the NECR and the way it relates to other codes and standards. Based upon the 2008 revisions to the NECR, the Engineer's Guide to the National Electrical CodeR is also an essential reference for established engineers looking for a refresher on the NECR and its impact on building codes.

SF05-356	Electromagnetic Nondestructive Evaluation.
	Takahashi, Seiki/ 9781586037529/ Price:EUR 138.00

	This publication aims to discuss the technical advances and the developments of the basics of electromagnetic NDT. Though one of the main topics is the Eddy Current Testing which is put to practical use in industry now as one of the approved methods of crack detection in steels and metallic structures, Electromagnetic Nondestructive Evaluation (X) emphasizes magnetic NDE method according to the concept of NDE & Science Research Center. The book contains thirty-three technical papers, covering topics on eddy current testing and technique, industrial applications, new methods, NDE by magnetism and magnetics, inverse problem and benchmark. The material is important for scientists and engineers working in the field of electromagnetic nondestructive testing or nondestructive evaluation, in defect detection and sizing, as well as in material characterization.

SF05-353	Tecnologia de Refrigeracion Acondicionado: Un Manual de Referencia en Espanol.
	Whitman, Bill/ 9781418055714/ Price:US$ 87.95



SF05-345	Proceedings of the 12th International Symposium on Interdisciplinary Electromagnetic, Mechanic and Biomedical Problems.
	Leiss, E./ 9781586037468/ Price:EUR 99.00

	The aim of the International Journal of Applied Electromagnetics and Mechanics is to contribute to intersciences coupling applied electromagnetics, mechanics and materials. The journal also intends to stimulate the further development of current technology in industry. The main subjects covered by the journal are: - Physics and mechanics of electromagnetic materials and devices; - Computational electromagnetic in materials and devices; - Applications of electromagnetic fields and forces. The three interrelated key subjects - materials, electromagnetics and mechanics - include the following aspects: control, micromachines, intelligent structure, inverse problem, eddy current analysis, electromagnetic NDE, magnetic materials, magnetoelastic effects in materials, bioelectromagnetics, magnetosolid mechanics, magnetic levitations, applied physics of superconductors, superconducting magnet technology, superconducting propulsion system, nuclear fusion reactor components and wave propagation in electromagnetic fields. The editorial policy is to combine information and experience from both the latest high technology fields and the well-established technologies within applied electromagnetics and mechanics. The editors hope to furtherly enhance the theoretical framework for their field from the interaction of old and new concepts. In order to assist readers to quickly grasp the current status of research in a specific area of applied electromagnetics and mechanics, both contributed and invited papers are published in special and thematic issues as well as regular issues.

SF05-344	Magnetic Properties of Uranium Based Ferromagnetic Superconductors.
	Sakarya, Eerdar/ 9781586037192/ Price:EUR 66.00

	Ferromagnetism and superconductivity have long been thought to be mutually exclusive. Recently however it was found that the compounds UGe2, URhGe and UIr belong to a class of materials in which ferromagnetisme and superconductivity appear simultaneously. One characteristic property of these compounds is the existence of strong correlations between the magnetic moments of the uranium ions and the conduction electrons. These correlations lead to unusual magnetic properties at low temperatures. By applying external pressure the magnetic correlations can be varied. The fact that superconductivity in these materials is found only for those pressures, at which the magnetic correlations are strongest, indicates that the effective attracting force between the conduction electrons responsible for superconductivity has a magnetic origin. In this research the magnetic correlations of the ferromagnetic superconductors are investigated in order to better understand the unusual coexistence of ferromagnetism and superconductivity. Besides the dilatometry, specific heat, magnetization, and three-dimensional neutron depolarization techniques, the muon spin relaxation (μSR) technique is frequently used in the study of de magnetic properties of the ferromagnetic superconductors. The muon experiments indicate that unusual excitations exist in these materials which are possibly responsible for the superconductivity.

VF05-12	Handbook of Semiconductor Nanostructures and Nanodevices, 5-Vols/Set.
	Balandin, A. A./ 9781588830739/ Price:US$ 1999.00

	Both experimental and theoretical aspects of semiconductor nanoscience and nanotechnology are covered. It is a must-have handbook for university libraries, research establishments, government laboratories, and high-tech companies engaged in research and development of semiconductors. It is written for a broad range of audience with different backgrounds and educational level, compiling past two decades of pioneering research. It provides in-depth information to research professionals active in the field of semiconductor nanoscale science and technologies. This handbook can be effectively used by upper-level undergraduate students, graduate students, postdoctoral researchers, scientists, engineers working in industry, consultants, technology investors and developers seeking the most up-to-date information on semiconductor nanotechnology. This handbook has been divided into five different thematic volumes based on semiconductor nanostructured materials and their based nanodevices.

VF05-11	Encyclopedia of Sensors, 10-Vols/Set.
	Grimes, Craig A./ 9781588830562/ Price:US$ 6999.00

	Encyclopedia of Sensors is the first encyclopedia ever published in the field of sensors. The multivolume encyclopedia will provide a complete coverage of most recent advances and emerging new sensor technologies in the fields of science, engineering and medicine. Although there are many books focused on sensors however no encyclopedic reference work has been published as of today. This encyclopedia will cover all aspects of sensor science and technology dealing with all types of sensor materials, their synthesis and spectroscopic characterization, sensor designs, fabrication and manufacturing techniques, sensor probes, features, physical, chemical and biosensors, their applications in electronics, photonic and optoelectronic industries, medicine, surface sensing, food industry, environmental engineering and nanotechnology. It is written for a wide range of audience from non-scientists to active scientists and engineers, professionals and experts working in the field of sensors.

VD04-244	Semiconducting Polymers: Chemistry, Physics and Engineering, 2-Vols/Set.
	Hadziioannou, Georges/ 9783527312719/ Price:US$ 445.00

	This book describes the various approaches to doped and undoped semiconducting polymers taken with the aim to provide vital understanding of how to control the properties of these fascinating organic materials. Prominent researchers from the fields of synthetic chemistry, physical chemistry, engineering, computational chemistry, theoretical physics, and applied physics cover all aspects from compounds to devices. Since the first edition was published in 2000, significant findings and successes have been achieved in the field, and especially handheld electronic gadgets have become billion-dollar markets that promise a fertile application ground for flexible, lighter and disposable alternatives to classic silicon circuitry. This second edition brings readers up-to-date on cutting edge research in this field.

SF05-407	Fiber Optic Sensors: An Introduction for Engineers and Scientists.
	Udd, Eric/ 9780470068106/ Price:US$ 82.95



SF05-404	Control of Continuous Linear Systems.
	Najim, Kaddour/ 9781905209125/ Price:US$ 182.95



SF05-339	Electromagnetic Fields in Mechatronics, Electrical and Electronic Engineering: Proceedings of ISEF'05.
	Krawczyk, A./ 9781586036270/ Price:EUR 148.00

	More and more researchers engage into investigation of electromagnetic applications, especially these connected with mechatronics, information technologies, medicine, biology and material sciences. It is readily seen when looking at the content of the book that computational techniques, which were under development during the last three decades and are still being developed, serve as good tools for discovering new electromagnetic phenomena. It means that the field of computational electromagnetics belongs to an application area rather than to research area. This publication aims at joining theory and practice, thus the majority of papers are deeply rooted in engineering problems, being simultaneously of high theoretical level. The editors hope to touch the heart of the matter in electromagnetism. The book focuses on the following issues: Computational Electromagnetics; Electromagnetic Engineering; Coupled Field and Special Applications; Micro- and Special Devices; Bioelectromagnetics and Electromagnetic Hazard; and Magnetic Material Modelling.

SF05-330	Electromagnetic Nondestructive Evaluation (VII).
	Dobmann, Gerd/ 9781586035945/ Price:EUR 130.00

	The aim of this selection of papers is to bring together researchers working very deep in the basics of electromagnetic NDT on one hand and industrialist discussing their practical problems on the other hand. The papers cover topics as; Microwave applications and Material Characterization; General Eddy Current Inspection Tasks; Novel Techniques and Sensors; Magnetic Flux leakage Inspection; Steam Generator Eddy Current Inspection Tasks, and Material Characterization. Especially Novel Techniques and Sensors and Material Characterization are discussed on multiple papers. This publication gives a good overview of the many scientific problems in this area, but also explains the actual challenges for the scientific-technical community, like problems with in-line inspection of pipelines or the enhancing the inspection performance in steam generator tubes inspection in the nuclear field. The material is important for scientists and engineers working in the field of electromagnetic non-destructive testing, in defect detection and sizing as well as in material characterization.

SF05-328	Microwave Radiometer Systems: Design and Analysis.
	Skou, Niels/ 9781580539746/ Price:GBP 123.00



SF05-326	Fundamentals of Laser Dynamics.
	Khanin, Ya I./ 9781904602118/ Price:GBP 80.00

	The book explores the current state of laser dynamics and provides reference data and basic experimental facts for old and new generation lasers. The most frequently used mathematical models are presented. The author discusses the reasons for spontaneous occurrence of pulsation of the intensity of the radiation of solid-state lasers, the influence of the nonstationary nature of parameters and non-linearity of laser elements on the generation characteristics. Special emphasis is placed on the problems of low-frequency dynamics of multimode lasers.

VF05-8	Handbook of Measuring System Design, 3-Vols/Set.
	Sydenham, Peter/ 9780470021439/ Price:US$ 1981.25

	Measuring systems lie at the heart of all science, engineering and technology, and are used to quantify physical phenomena such as temperature, pressure, voltage and current. Rapid advances in computing and electronics have enabled the development of highly sophisticated measuring systems that can be utilised across many industrial fields. The Handbook of Measuring System Design provides an authoritative and comprehensive reference that addresses a wide range of measurement-specific design and application problems in the fields of engineering and technology. Building on a thorough treatment of foundational topics the Handbook presents a modern, 'systems thinking' approach and covers many areas that have received little attention elsewhere (systems, safety, design, legal and artificial intelligence).

SF05-408	Principles of Lithography.
	Levinson, Harry J./ 9780819456601/ Price:US$ 91.00



SF05-400	Biomimicry for Optimization, Control, and Automation.
	Passino, Kevin M./ 9781852338046/ Price:EUR 86.95



SF05-392	Network Theory.
	Jagan, N. C./ 9781904798040/ Price:GBP 50.00

	A book on network analysis is generally one of the basic texts a student of engineering refers to. While currently available books on the subject adequately cover the different facets the authors feel that there is still a need for a book which provides all the necessary material required by the students of electrical and electronic engineering at one place for a solid foundation in the area of Circuit Theory. The purpose of writing this book is therefore to fulfil this requirement. The material presented in this book can be covered adequately in two semesters. The authors have tried to present the concepts of network analysis in a lucid way so that a student reading this book will be able to understand the subject easily. No prerequisites other than a rudimentary knowledge of physics including the concepts of electricity and magnetism are necessary.

SF05-380	Wireless Sensor Network Systems: A Systems Perspective.
	Bulusu, Nirupama/ 9781580538671/ Price:GBP 94.00



SF05-341	Microwaves and Optoelectronics.
	Shirsat, M. D./ 9781904798439/ Price:GBP 60.00

	There have been tremendous developments in the field of microwaves and optelectronics technology in recent years. The telecommunications industry has been revolutionised by these technological advancements, along with other areas of electronics. The progress in the microwave and optical fiber communication technology now enables networks to carry data at speeds of gigabits per second. And laboratory conditions can demonstrate data transfer speeds at terabits per second. New technology is being developed continuously, with commercial applications that have global significance. Consequently research into this field is of paramount importance, and has a meaningful impact for everybody, extending beyond the confines of the scientific laboratory. The editors have compiled the latest research in this field into one important volume.

SF05-326	Physics of Solid State Lasers.
	Antsiferov, V. V./ 9781898326175/ Price:GBP 70.00



SF05-323	Information Transducers.
	Bogomol'nyi, V. M./ 9789067644266/ Price:EUR 147.00

	This volume deals with the physics and electroelasticity relations of information transducers, i.e. sensors and actuators based on polar dielectrics and semiconductors. The issues are viewed in terms of solid state physics and fracture mechanics. The book contains methods for calculating electrical fields, currents, temperature, mechanical stress-strain state of piezoelectric devices, which are used in measurement equipment and automatic control systems. The book proposes optimal micro-electromechanical and piezoelectronic devices on the basis of computer calculation and experimental data. It will be particularly useful to engineers in electronics, automatics and computing, as well as undergraduates and graduates.

SF05-322	Advanced X-ray Techniques in Research and Industry.
	Singh, A. K./ 9781586035372/ Price:EUR 165.00

	The book is a collection of articles covering basic crystallography, local texture measurements with high energy synchrotron radiation, evolution of textures, texture mapping by scanning X-ray diffraction, absorption tomography for three dimensional measurements in bulk materials, ultra thin films specular X-ray reflectivity, small angle X-ray scattering, glancing incidence X-ray diffraction and X-ray line profile analysis. A large number of chapters cover the application of the Rietveld refinement technique for different materials. The application of high temperature X-ray diffraction to different materials is also discussed. Apart from this the application of X-ray diffraction techniques to characterize the materials is dealt with in different areas; such as magnetic materials, nano materials, aluminum alloys, titanium alloys, biomaterials, forensic application of textile fabrics, sensors, steels and surface modifications. It also covers the geometrical aspects of X-ray diffractometer and related applications.

SF05-321	Electromagnetic Nondestructive Evaluation (IX).
	Udpa, Lalita/ 9781586035228/ Price:EUR 126.00

	Electromagnetic Nondestructive Evaluation has grown considerably in recent years largely due to advances in sensor technology, computational modeling and data analysis techniques. This publication discusses developments in numerical simulation of physical phenomena associated with electromagnetic NDE methods, new electromagnetic sensors, signal and image processing techniques and inverse solutions to NDE problems. Electromagnetic Nondestructive Evaluation (IX) emphasizes basic science and early engineering developments in the field, as well as practical application of emerging technologies to problems of direct relevance to industry. The book contains thirty six technical papers, covering topics on modeling, (forward and inverse problems), new inspection methods, materials characterization, signal processing and applications.

	Surface Phenomena in Melts.
	Popel, S.I./ 9781898326694/ Price:GBP 80.00

	The methods of determination of the surface properties of liquids at the interface with saturated vapours and another condensed phase are presented. The modelling-thermodynamic method is used to discuss the isotherms of the surface and interfacial tension of metallic, oxide and salt melts, and the absorption of components and adhesion of phases are evaluated. The electrochemical properties of the interfaces, the processes of spreading of melts on the solid and liquid surfaces, capillary saturation and bonding of the particle by liquid interlayers are examined.

	Explosive-Driven Generators of Powerful Electric Current Pulses.
	Fortov, V.E./ 9781904602231/ Price:GBP 90.00

	The physical-chemical fundamentals of the construction of two types of generators are considered: magnetohydrodynamic explosive-driven mobile plasma armature and explosive-driven magnetic generator (EMG) with metal armature. Experimental research into the explosive plasma currents, subjected to the effect of Rayleigh-Taylor instability, is described in detail. The processes of transformation of the energy of detonation products into pulses of electrical energy and the efficiency of such processes are considered. The description of design of small-size EMG for supplying high-resistance loads (for example, relativistic electron beams) is given. Special attention is paid to the problem of the coordination of the EMG and power peakers based on the principle of electric explosion of conductors with loads.

	Electromagnetic Emission and Plasma in Ecology.
	Protasevich, E. T./ 9781898326663/ Price:GBP 70.00

	E T Protasevich and V P Grigor'ev, Tomsk Polytechnical University, Russia The authors tried to solve the problem of environmental protection and presents the reader with prospects of the application of electromagnetic radiation and plasma for solving a number of ecological problems. Special attention is given to the development of radiolocation methods of identification of radioactive contamination of the atmosphere. The second problem is the controlled precipitation of atmospheric contamination. The authors also examine the development of physical methods influencing weather in order to eliminate shortage of water in dry regions. Methods of detection of radioactive emission into the atmosphere, based on ionisation of the atmosphere at the surface of the earth Passive methods of detection of radioactive emission into the atmosphere based on recording the radiation of atomic hydrogen and OH Prospects of methods of precipitation of atmospheric contamination Sources of powerful electromagnetic radiation (special features of sources of electromagnetic radiation for radiolocation detection of small objects; masers at cyclotron resonance; generation of electromagnetic oscillations in systems with a virtual cathode; free electron lasers, powerful laser radiation sources and methods of transfer of laser radiation in the atmosphere)

VF05-7	Enabling Technologies for MEMS and Nanodevices.
	Baltes, Henry/ 9783527307463/ Price:US$ 375.00

	Advanced Micro & Nanosystems (AMN) provides cutting-edge reviews and detailed case studies by top authors from science and industry, covering technologies, devices and advanced systems from the micro and nano worlds, which together have an immense innovative application potential that opens up with control of shape and function from the atomic level right up to the visible world without any technological gaps. In this volume, a close look at enabling technologies is taken, the first section on MEMS featuring an introduction to the challenges and benefits of three-dimensional silicon processing. An insider's view of industrial MEMS commercialization is followed by chapters on capacitive interfaces for MEMS, packaging issues of micro- and nanosystems, MEMS contributions to high frequency integrated resonators and filters, and the uses of MEMS in mass data storage and electrochemical imaging by means of scanning micro- and nanoprobes. The second section on nanodevices first tackles the emerging topic of nanofluidics with a contribution each on simulation tools and on devices and uses, followed by another two on nanosensors featuring CNT sensors and CMOS-based DNA sensor arrays, respectively.

SF05-427	Passive RF & Microwave Integrated Circuits.
	Maloratsky, Leo/ 9780750676991/ Price:US$ 113.00



SF05-362	The Designer's Guide to Verilog-AMS.
	Kundert, Kenneth S./ 9781402080449/ Price:EUR 169.95



SF05-356	Specification for Carbon Steel Electrodes for Shielded Metal Arc Welding.
	American Welding Society/ 9780871716422/ Price:US$ 58.00



SF05-314	Electromagnetic Nondestructive Evaluation.
	Sollier, Thierry/ 9781586034078/ Price:EUR 126.00

	This publication presents the intentions of the ENDE International Standing Committee to enable a fruitful and synergistic investigation of Electromagnetic Non-Destructive Evaluation. Indeed, this topic is crucial to an increasing number of engineering activities and environmental evaluation and protection issues, and it requires theoretical insight, efficient models and simulations, robust data interpretation, and proper instrumentation combined accordingly. These proceedings of the E’NDE 2003 Workshop consist of 36 full accepted papers which were all reviewed and accordingly revised. There were participants from Europe, United States, Korea and Japan.

SF05-314	International Journal of Applied Electromagnetics and Mechanics.
	Takagi, T./ 9781586034191/ Price:EUR 248.00

	This publication contains a selection of 124 papers among the 165 full-length contributions which were submitted on-site at ISEM 2003. The objective of the symposia series is to vigorously promote the research in the field of electro-mechanical systems. The reader will, we hope, appreciate the variety of topics that were addressed. This is what makes ISEM so stimulating for whoever is interested in the applications of electromagnetics and its opening toward many technical fields. Yet, this publication does not intend to be a mosaic of sub-disciplines, but aims at their integration and synergy. This will be demonstrated by the present selection.

SF05-311	Power System Dynamics: Stability and Control.
	Padiyar, K. R./ 9781904798019/ Price:GBP 50.00

	The book is divided into five parts with a total of 14 chapters. The first part begins by introducing the basic concepts of stability. The second part develops the system model in detail. Part three presents the small signal stability analysis applied to the problem of low frequency oscillations. Part four presents the SSR phenomenon and part five deals with the transient stability problem. The basic concepts of voltage stability and methods of analysis are discussed in Appendix A.

	Laser Resonators.
	Bykov, V.P./ 9781898326281/ Price:GBP 75.00



VF05-5	Quantum Coherence Correlation and Decoherence in Semiconductor Nanostructures.
	Takagahara, Toshihide/ 9780126822250/ Price:US$ 270.00

	Semiconductor nanostructures are attracting a great deal of interest as the most promising device with which to implement quantum information processing and quantum computing. This book surveys the present status of nanofabrication techniques, near field spectroscopy and microscopy to assist the fabricated nanostructures. It will be essential reading for academic and industrial researchers in pure and applied physics, optics, semiconductors and microelectronics.

VF05-4	Adhesive Bonding in Photonics Assembly and Packaging.
	Yacobi, B. G./ 9781588830197/ Price:US$ 249.00

	Adhesive Bonding in Photonics Assembly and Packaging deals with basic principles and the most up to date technology of adhesive bonding used for photonics assembly and packaging. Adhesive bonding is extensively employed in a wide variety of applications in microelectronics and photonics assemblies and packaging, manufacturing of optoelectronic and fiber-optic components, and of medical devices. For such a wide variety of applications, it is important to identify and develop compatible and reliable adhesive bonding techniques targeting specific applications. Photocuring of adhesives is becoming one of the most preferred methods due to the advantages related to the capabilities of instant cure, cure-on-demand, increased production speed, and ease of automation. It is critical to understand the adhesion, optical, thermal, mechanical and chemical properties of such adhesives. The main objective of this book is to provide a complete coverage of adhesive bonding used in photonics assembly and packaging.

VD04-143-1	Handbook of Fuel Cells: Fundamentals, Technology, Applications, 4-Vols/Set.
	Vielstich, Wolf/ 9780471499268/ Price:US$ 3161.50

	This four volume set brings together for the first time in a single reference work the fundamentals, principles and the current state-of-the-art in fuel cells. Its publication reflects the increasing importance of and the rapidly growing rate of research into alternative, clean sources of energy. With internationally renowned Editors, International Advisory Board members, and Contributors from academia and industry, it guides the reader from the foundations and fundamental principles through to the latest technology and cutting-edge applications, ensuring a logical, consistent approach to the subject. The Handbook is divided into three main themes, covered in four volumes: Volume 1: "Fundamentals and Survey of Systems" Volume 2: "Fuel Cell Electrocatalysis" Volumes 3 and 4: "Fuel Cell Technology and Applications"

SF05-427	Mathematics for Electrical Engineering and Computing.
	Attenborough, Mary/ 9780750658553/ Price:US$ 69.95



	Practical Electric Discharge Photography.
	Protasevich, E.T./ 9781898326885/ Price:GBP 55.00

	The problems of formation of images in the gas discharge method of visualisation are generalised and examined in detail. The physical processes, taking place during electric discharge photography, are explained qualitatively. The methods of gas discharge visualisation are described: high-voltage sources, timers, exposure cells, and special attention is given to the optical and electrical methods and devices for recording electric discharges. The areas of practical application of electric discharge photography are described. The book is suitable for students and scientists working in the area of applied problems of gas discharge and the application of electric discharge phenomena.

	Proceedings of the Tenth International Symposium on Applied Electromagnetics and Mechanics.
	Takagi, T./ 9781586033293/ Price:EUR 242.00

	This publication covers the following topics in the area of applied electromagnetics and mechanics; Strategies for new research and their realization, Advanced dynamics and control, Advanced magnetic engineering, Advanced magnetic fusion nuclear research, Analysis and control of magnetic field, Applied superconductivity, Beam science and technology, Biomagnetics and medical engineering, Electromagnetic functional materials and adaptive systems, Electromagnetic nondestructive evaluation, Electromagnetic sensors and actuators, Inverse problems and new application, NDE and Magnetic detection of material degradation and damage evaluation, and Virtual reality and smart visualization. The ISEM is now a well known international forum on applied electromagnetics. It started in 1988 in Japan.

	Proceedings of the Tenth International Symposium on Applied Electromagnetics and Mechanics - Part 2.
	Takagi, T./ 9781586033286/ Price:EUR 242.00

	This publication covers the following topics in the area of applied electromagnetics and mechanics; Strategies for new research and their realization, Advanced dynamics and control, Advanced magnetic engineering, Advanced magnetic fusion nuclear research, Analysis and control of magnetic field, Applied superconductivity, Beam science and technology, Biomagnetics and medical engineering, Electromagnetic functional materials and adaptive systems, Electromagnetic nondestructive evaluation, Electromagnetic sensors and actuators, Inverse problems and new application, NDE and Magnetic detection of material degradation and damage evaluation, and Virtual reality and smart visualization. The ISEM is now a well known international forum on applied electromagnetics. It started in 1988 in Japan.

	International Journal of Applied Electromagnetics and Mechanics: Proceedings of the tenth International Symposium on Applied Electromagnetics and Mechanics ISEM-Tokyo.
	Takagi, T./ 9781586033309/ Price:EUR 666.00



	Proceedings of the Tenth International Symposium on Applied Electromagnetics and Mechanics ISEM-Tokyo: International Journal of Applied Electromagnetics and Mechanics.
	Takagi, T./ 9781586033279/ Price:EUR 220.00

	This publication covers the following topics in the area of applied electromagnetics and mechanics; Strategies for new research and their realization, Advanced dynamics and control, Advanced magnetic engineering, Advanced magnetic fusion nuclear research, Analysis and control of magnetic field, Applied superconductivity, Beam science and technology, Biomagnetics and medical engineering, Electromagnetic functional materials and adaptive systems, Electromagnetic nondestructive evaluation, Electromagnetic sensors and actuators, Inverse problems and new application, NDE and Magnetic detection of material degradation and damage evaluation, and Virtual reality and smart visualization. The ISEM is now a well known international forum on applied electromagnetics. It started in 1988 in Japan.

	Elastoplastic Deformatioon and Failure of Materials Under Pulsed Loading.
	/ 9781898326816/ Price:GBP 75.00



SF05-453	Selected Papers on Holographic Interferometry: Applications.
	Sirohi, R. S./ 9780819443380/ Price:US$ 127.00



	Ion Exchange in Single Crystals for Integrated Optics and Optoelectronics.
	Korkishko, Yu N./ 9781898326410/ Price:GBP 85.00



	Lithium Niobate Crystals.
	Kuz'minov, Yu S./ 9781898326304/ Price:GBP 60.00

	Lithium niobate crystals have a number of unique properties. Lithium niobate is at the same time a ferroelectric, piezoelectric, pyroelectric, and has high nonlinearly optical and electro-optical coefficients and photorefractive sensitivity. These properties enable these crystals to be used widely in optical and acoustic devices, and photorefractive sensitivity, enhanced by doping with transitional metals, offers new possibilities of using lithium niobate as a recording holographic medium. These properties are determined by the crystal structure of lithium niobate sensitive to physical and chemical effects. Special attention is given in the book to physicochemical features of technology, disruption of stoichiometry in these crystals and detection of this disruption by physical methods. At the same time, the ideas and methods proposed in the book can be used in technology of other crystals.

	Luminescence of Molecules and Crystals.
	Galanin, M. D./ 9781898326335/ Price:GBP 35.00



	Ferrorelectric Thin-Film Waveguides in Integrated Optics and Optoelectronics.
	/ 9781898326106/ Price:GBP 70.00



	Theory of Continuous-wave Chemical Lasers.
	Stepanov, A.A./ 9781898326366/ Price:GBP 70.00



	Undulator Radiation and Free-electron Lasers.
	Cherenkov, P.A./ 9781898326137/ Price:GBP 50.00



	Optical and Electrical Properties of Semiconductors.
	Kopaev, Yu V./ 9781898326373/ Price:GBP 60.00



	Coherent Radiation Processes in Plasma.
	Antsiferov, V. V./ 9781898326168/ Price:GBP 60.00



	Control of Spectra of Molecular Lasers.
	Basov, N.G./ 9781898326144/ Price:GBP 48.00



SF05-411	Industrial High Voltage, Vol. 2: Co-Ordination, Measurement, Testing.
	Kreuger, F. H./ 9789062755622/ Price:EUR 34.00

Unifacmanu Company.